Sanxuan International Co. Ltd.

Shenzhen, China

• MOQ 2 Set(s)

ABS Material, Polishing Suface , Two Directions Controlled The SWG-310A Flap Barrier guarantees fast, smooth and efficient access control in both entry and exit directions. 304 stainless steel framework inside, ABS material top cover with polishing surface, ABS material edge with polishing surface, 304 stainless steel access door with Brushed surface, no soldering at surface and edge. When power off, the door wings open into the casings to the request of fire protection. Particularly elaborate design making this security barrier appropriate for almost any building. With its mechanical design and its embedded electronics, the equipment guarantees high levels of safety. The system is provided with a standard eclectics interface and is easily integrated with access control system. It can be used for intelligent control and management of the passage after equipped with different access control system. Function description: The door wings open automatically, permit authorized passage and block unauthorized entry and raise alarms draw the attention of security. With function of self-examine and alarms, it is convenient for users to maintain and use. Two directions controlled/one direction controlled, with LED direction indicator. Reset automatically, go signal will be cancelled if passage through is not completed within pre-set time, the standard default is 10 seconds. Unit can be adjusted permanent open or close when power off to meet different needs. Unit can be controlled and administered by remote control Normally closed operation mode or normally open operation mode can be adjusted via the built-in small keyboard or software. Anti-pinch function, tailing-proof and intruder alarm function Working principle: The user can be authorized via access control system or push button, Confirmation of authorization is provided through a LED display in the top cover of the unit and the door wings open automatically, immediately the user passes the passage, the door wings quickly re-close to prevent tailing-proof, an anti-pinch function will protected the user to prevent pinch. Technology specifications: Framework: 304 Grade Stainless Steel Materials of top cover: ABS Dimensions: 1470*300*940mm Material of wing gates: Organic glass Width of wing gates: 250mm (default) Width of the lane:550mm (Standard) Net weight: single wing unit: 110kg; double wings unit: 140kg Interface: RS485 Power supply: 200~240V AC / 100~120VAC 50/60Hz Main board voltage: 24V Transit speed: 30-40persons per minute Working Environment: Indoor/Outdoor (with a tent over) Temperature: -20 celsius to 70 celsius Humidity: ≤90% Options: Access controller and proximity reader Material of door wings is optional 316 grade stainless steel Remote control

• MOQ 2 Set(s)

304 Stainless Steel, Brushed Surface, Two directions controlled The SWG-310D automatic wing gate guarantees fast, smooth and efficient access control in both entry and exit directions. When power off, the door wings open into the casings to the request of fire protection. Its particularly elaborate design making this security barrier appropriate for almost any building With its mechanical design and its embedded electronics, the equipment guarantees high levels of safety. The system is provided with a standard eclectics interface and is easily integrated with access control system. It can be used for intelligent control and management of the passage after equipped with different access control system. Function description: The door wings open automatically, permit authorized passage and block unauthorized entry and raise alarms draw the attention of security. With function of self-examine and alarms, it is convenient for users to maintain and use. Two directions controlled/one direction controlled, with LED direction indicator. Reset automatically, go signal will be cancelled if passage through is not completed within pre-set time, the standard default is 10 seconds. Unit can be adjusted permanent open or close when power off to meet different needs. Unit can be controlled and administered by remote control Normally closed operation mode or normally open operation mode can be adjustedvia the built-in small keyboard or software. Anti-pinch function, tailing-proof and intruder alarm function Working principle: The user can be authorized via access control system or push button, Confirmation of authorization is provided through a LED display in the top cover of the unit and the door wings open automatically, immediately the user passes the passage, the door wings quickly re-close to prevent tailing-proof, an anti-pinch function will protected the user to prevent pinch. Technology specifications: Framework: 304 Grade Stainless Steel Dimensions: 1470*300*990mm Material of wing gates: Organic glass; color: blue Width of wing gates: 240mm (default) Width of the lane:550mm (Standard) Net weight: single wing unit: 120kg; double wings unit: 150kg Interface: RS485 Power supply: 200~240V AC / 100~120VAC 50/60Hz Main board voltage: 24V Transit speed: 30-40persons per minute Working Environment: Indoor/Outdoor (with a tent over) Temperature: -20 celsius to 70 celsius Humidity: ≤90% Options: Access controller and proximity reader Material of door wings is optional 316 grade stainless steel Remote control

• MOQ 1 Set(s)

Hydraulic Road BlockerSRB-380 Series, SRB-450, SRB-500, SRB-750 The Hydraulic Road Blocker is the vehicle control device which can be either integrated with various parking systems or installed as single unit, designed as an effective means of controlling access to high security areas such as: airports, ports, customs, governmental buildings, banks, penitentiaries, power stations, military sites, stores, embassies, warehouses, etc... The hydraulic road blocker is designed to guarantee the full level of security. The hydraulic drive is operated by an energy accumulator that can be positioned as far away as 4 m. This facilitates placing several barriers end to end to control exceptionally wide access points. The hydraulic road blocker is available in 4 types: SRB-380 Series, SRB450, SRB-500 and SRB-750. Descriptions: Heavy duty 10 mm thick carbon steel anti-skid top plates; Carbon steel plate obstacle, 4 mm thickness, welded onto a frame of thick section profiles. The obstacle unit is articulated on two balance spring; The barrier front face is formed by curved plating closed at both ends, with red and white reflecting stripes; Optional crushproof barbed nail; Fully painted frame and cover with galvanized steel plate; Hydraulic power unit fully painted, available with manual operation mode which allows lowering the lifted gate plate back to its horizontal position by manual operation in power failure or malfunction cases; Control unit with push button box, optional remote control. Specifications: Dimension specifications: SRB-380A: Dimensions: 2, 260*780*700mm Length of obstacle: 2, 050 mm; Height of raised obstacle: 380mm. SRB-380B: Dimensions: 2, 500*780*700mm Length of obstacle: 2, 290 mm; Height of raised obstacle: 380mm. SRB-380C: Dimensions: 2, 930*780*700mm Length of obstacle: 2, 720 mm; Height of raised obstacle: 380mm. SRB-380D: Dimensions: 3, 500*780*700mm Length of obstacle: 3, 290 mm; Height of raised obstacle: 380mm SRB-450: Dimensions: 2, 930*820*700mm Length of obstacle: 2, 720 mm; Height of raised obstacle: 450mm SRB-500: Dimensions: 3, 210*900*700mm Length of obstacle: 3, 000 mm; Height of raised obstacle: 500mm SRB-750: Dimensions: 3, 210*1156*808mm Length of obstacle: 3, 000 mm; Height of raised obstacle: 750mm Technical Parameters: SRB-380 Series Available for the passing of 70-ton trucks SRB-450 Available for the passing of 60-ton trucks SRB-500 Available for the passing of 60-ton trucks SRB-750 Available for the passing of 50-ton trucks System power: 1.5KW/380V Opening time: ≤2S Closing time: ≤3S (SRB-750 ≤4S) Working temperature: -25 celsius to 65 celsius Storage environment: -10 celsius to 75 celsius, waterproof, moisture-proof, & dustproof Functions: Strong and durable structure, great capacity of weight bearing; Stable movement, low noise; Workable under poor working conditions; Adopting low hydraulic pressure driving, with low failure rate, high reliability, and long serving life; Simple and easy maintenance; Compatible with all types of access control and safety systems. Options Available: Unidirectional LED traffic light; Warning LED light (installed on the obstacle); Longer hydraulic hose, max to 15m; Optional crushproof barbed nail; Loop detector (safety system for automatic operation); Infrared (safety system for automatic operation); Remote control (open - stop - close).

SR-EM201 Series 125KHz Smart Card Reader Features: SR-EM201 transceiver unit is designed for reading code from UEM4100 compatible read-only tags. They are a major component in RFID (Radio Frequency Identification) reader system. It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc. Technical Specifications: Built-in transceiver antenna; 125 KHz (EM); Maximum effective distance up to 100mm (EM);Less than 100ms decoding time; Low power dissipation with wide range single power supply; Voltage protect: be compatible with converse voltage; Supply voltage: 12VDC (±20%); Support UEM4100 compatible read only tags (64Bits, Manchester coding); Waterproof: made in epoxy; Built-in: BI-color LED and buzzer; Color: silver or dark; Temperature: -30-80 Degree; SR-EM201A: wiegand 26; SR-EM201B: Wiegand 34; SR-EM201C: ABA; SR-EM201D: ADV(wiegand 26/wiegand 34); SR-EM201E: RS232; SR-EM201F: RS485.

Access Controller SAC-T200 Descriptions: Control 2 door, in and out door control, or get in control and out by push button Collocations: PCB board, power supply box (optional including power power line), serial port communication line, software, manual, key(2pcs), carton Function Introduction Conventional Function: offline operation; real time supervision; photo display; mass storage; flexible user privilege setup; remote unlocking; multi-user supervision; quick setting; convenient checking and query; revisable and printable report form; report form;report can be exported to excel file; card+password unlocking; alarm for long time unclosing;alarm for invalid card swiping; first card unlocking;alarm for illegal break in; unlocking at definite time; e-map etc. Professional function: interface locking; intimidation alarm; integrated fire control;anti-passback and anti-tail; interlocking;multi-card unlocking; emergency double locking; in door population checking; unlocking based on internal and external validation. all-in-one-card management system: nomal shift and multi-shifts time attendance management system; fixed ration dining management system; meeting attendance management system; online patrol management system and security alarm management system. Fire and alarm linkage: If no connection with the expansion board, only has software interface alarm, and drive the computer speaker. If connected with expansion board, is able to alarm by hardware, if connected with strengthened expansion board, then is able to Security alarm Features: With Uninterruptible Power Supply interface Support opening door button Anti-pass back Function Optional remote open button Multi-card open door function Open long time at specified time function Electronic map Urgency locking First card unlocking Unlock based on internal and external validation Keypad (card+passwor, supper password) Storage capacity: 20, 000 cards and 100, 000 records Or 60, 000 cards and 60, 000records Technical Specifications: Dimensions of PCB: 160mm*106mm. Packing: carton Packing Size: 210*138*55mm Dimensions of control box SAC-BOX (optional）: 273mm*228mm*65mm. Main-board voltage: 12VDC 4-7A. Power consumption: ﹤100mA. Power Consumption: Less than 100mA Communication: TCP/IP Input Format of Reader: Wiegand 26 (All card reader with compatible protocol, such as Motorola , HID, EM , Mifare one etc) Output: 1 relays output for controlling switch signal Max. controller of networking: N*256PCS Quantity of Readers: 4pcs, 2 in and 2 out Door Controlled: 2 Door opening time extending setting: 1-600 seconds(adjustable) Operating temperature: -40 ℃ to +70 ℃. Operating humidity: 10-90% RH, not condensed. Power interruption protection: High Speed Memory, Records never lose Max Distance from Reader to Controller: 100m (suggestion distance 80m) Max Distance between Controllers: TCP/IP: Depends on net coverage area

• MOQ 2 Piece

The SSG-320B automatic swing gate guarantees fast, smooth and efficient access control in both entry and exit directions. When power off, the door swings open into the casings to the request of fire protection. Its particularly elaborate design making this security barrier appropriate for almost any building With its mechanical design and its embedded electronics, the equipment guarantees high levels of safety. The system is provided with a standard eclectics interface and is easily integrated with access control system. It can be used for intelligent control and management of the passage after equipped with different access control system. Function description: The door swings open automatically, permit authorized passage and block unauthorized entry and raise alarms draw the attention of security. With function of self-examine and alarms, it is convenient for users to maintain and use. Two directions controlled/one direction controlled, with LED direction indicator. Reset automatically, go signal will be cancelled if passage through is not completed within pre-set time, the standard default is 10 seconds. Unit can be adjusted permanent open or close when power off to meet different needs. Unit can be controlled and administered by remote control Normally closed operation mode or normally open operation mode can be adjustedvia the built-in small keyboard or software. Anti-pinch function, tailing-proof and intruder alarm function Working principle: The user can be authorized via access control system or push button, Confirmation of authorization is provided through a LED display in the top cover of the unit and the door swings open automatically, immediately the user passes the passage, the door swings quickly re-close to prevent tailing-proof, an anti-pinch function will protected the user to prevent pinch. Technology specifications: Framework: 304 Grade Stainless Steel Dimensions: 1400*280*990mm Net weight: single swing unit: 110kg; double swings unit: 140kg Interface: RS485 Power supply: 200~240V AC / 100~120VAC 50/60Hz Main board voltage: 24V Transit speed: 30-40persons per minute Working Environment: Indoor/Outdoor (with a tent over) Temperature: -20 celsius to 70 celsius Humidity: ≤90% Options: Access controller and proximity reader Material of door swings is optional 316 grade stainless steel Remote control

• MOQ 2 Piece

Full Height Turnstile SFHT-200A The central column will be set free when power off to the request of fire protection. When power on, the central column lock automatically. The turnstile provides a basic tripod to control access smoothly and effectively by basic operation, and also prevent illegal in and out. The machine is well in design, rustproof, durable and can resist external destroy. According to different machine centers, full height turnstile can be divided into Motorized Full Heigth Turnstile and Solenoid Full Height Turnstile. Their differences are Solenoid Full Height Turnstile can finish lock and unlock function by solenoid With interface of switch of relay, compatible with all the access control system It can be used for intelligent control and management of the passage after equipped with diffent access control system. Function Descriptions: Available in single walkway or bi-directional passage A valid lock action can allow one passage at one time It will lock automatically if passage through turnstile is not completed within pre-set time, the set time can be set up with the built-in small keyboard or software. Emergency configuration: The central column will be set free when power off to provide a clear walkway for escape in the event of an emergency Anti backup function to prevent reverse rotation once the arm has move 60 degree form home Interface: one standard port-RS485 Control panel with count and LED digital function Optional traffic-light: A Red Cross symbol will illuminate to indicate the unit is not available for pass, and a green arrow indicate the direction of allowable pass Framework-Specifications: Framework: 304(default) /316 Grade Stainless Steel Thickness of ply: 1.5mm/ 2.0mm Finish: Brushed surface (default)/ polishing surface Specification: 1630*1500*2300mm (Standard) Weight: 150kg Arms length: 670mm Arm diameter: 38mm The maximum tolerance of the pole: 20Kg Working driving force of the pole: 3Kg Working Environment: Indoor/Outdoor Transit speed: 30-40 persons per minute Temperature: -20 celsius to 60 celsius Applications: Typical areas of application are: office building, government building, hotel, super market, bank, park etc. To find out more detail about this series, please contact us.