The Torren 100 mm 4” borewell submersible pumps stand at the forefront of technology, offering energy efficiency and noise-free operation. These lightweight agriculture pumps are engineered for easy installation and are specifically crafted to withstand high axial thrust loads,more...
Silent Features Body: Stainless steel motor body Motor shaft: Stainless steel shaft Motor: The pumps are coupled to water cooled, re-windable Induction motors Direction of Rotation: Anti Clockwise, when viewed from the driving end Impeller: Centrifugal radial flow type more...
VIKRAM’s Bore well compressor pumps, manufactured out of high quality materials are of either single cylinder or double cylinder construction pumps coupled to electric motors of suitable capacity. These pumps are used mostly for agricultural and industrial purposes running on emore...
Available in single and double cylinder design. : Requires no priming.
Sound in design and Robust in construction
withstanding overload. : Dynamic balancing of rotors ensuring vibration free
performance.
Easy installation and maintenance. : Can be installed in more than one bore based on the
water levels.
Easy belt alignment of compressor with the motor
ensuring higher efficiency and close to zero
maintenance. : Rigorous quality control checks at every stage of
manufacturing to ensure high degree of reliability.
Light weight and easy to install : Stainless steel pump shell for corrosion resistance and LTB bushes for high wear resistance and longer life
Modular construction and easily interchangeable parts : High quality water-resistant polymer insulated wires for longer life even under adverse voltage conditions
Impellers and diffusers of high quality engineering polymer :
Available in radial flow impeller design in shell type assembly : Pressure diaphragm to compensate excess pressure due to heating up of filled water
Noise free operations. : Easily rewindable Squirrel-cage motor of water-cooled, designedfor 200 – 240 V, 50 Hz, AC power supply
Improved hydraulic design with increased efficiency and reduced power consumption : Built in NRV with minimum friction
Improved hydraulic design with increased efficiency and reduced power consumption : Built in NRV with minimum friction
Light weight and easy to install : Stainless steel pump shell for corrosion resistance and LTB bushes for high wear resistance and longer life
Noise free operations. : Easily rewindable Squirrel-cage motor of water-cooled,
designed for 200 – 240 V / 350 – 440 V, 50 Hz,
AC power supply
Impellers and diffusers of high quality engineering polymer :
Radial and mixed flow impeller designs including high head versions in shell type assembly : Pressure diaphragm to compensate excess pressure due
to heating up of winding and filled water
Modular construction and easily interchangeable parts : High quality water-resistant polymer insulated
wires for longer life even under adverse voltage conditions
Our clients can avail from us an extensive range of Borewell Compressor Pumps. Offered Pumps are designed for lifting water from deep bore wells. These Borewell Compressor Pumps are widely used for agriculture, industrial and domestic purposes and needs no foot-valve or jet. Thesmore...
ALTUS 100mm ( 4”) Bore well Submersible pump sets offer trouble free operation lifting water to new heights from new depths. The pumps are manufactured under exacting quality control measures to offer longer life and higher efficiency. The computerized design allows varied voltmore...
Suguna Submersible motor is a squirrel cage water cooled and water lubricated induction motor. The pumps are of radial mixed flow type pumps. The bearings are water lubricated.Submersible pumps are for purifying water from deep wells using submerging in water. Stainless Steel Motmore...
The borewell compressor pump works on the principle of difference in density of two-inter-connected water columns and the heavier one over balancing the lighter one. Water outflow through delivery pipe will be pulsated. the discharge of water will greatly depend on the yield of tmore...
Suguna Submersible motor is a squirrel cage water cooled and water lubricated induction motor. The pumps are of radial mixed flow type pumps. The bearings are water lubricated.Submersible pumps are for purifying water from deep wells using submerging in water. 4″ borewell pumpsmore...
Columns (s) gives level of water at working condition.Water outflow through delivery pipe will be pulsated and not continuous.The discharge of water will greatly depend on the yield of the bore. more...
VASANTHAM Borewell Compressor is the first Compressor to get the ISI Spare parts in small scale industries. VASANTHAM spare parts are manufactured with modern high technology. VASANTHAM also manufactures the oil free Air Compressor with best quality materials under most arduous cmore...
C.R.I. 80 mm (3") Submersible pumpsets are built with thermoplastic impellers, diffusers and inbuilt check valve. All vital components of these pumpsets are made of corrosion resistant thermoplastic and the shaft is of SS 304410. Pumpsets are multistage centrifugal type. The optimore...
C.R.I. 100 mm (4”) Borewell Submersible pumpsets are built with impellers & diffusers made of thermo plastics and other vital components like check valve housing and suction inter connector are made of graded cast iron, outer shell made oh high quality stainless steel. The optimore...
As a respectable firm, we bring forth the best quality 4" Borewell Submersible Pump to our customers. We specialize in manufacturing, supplying and exporting the best quality Borewell Submersible Pumps which are available in varied grades and dimensions. Our Borewell Submersible more...
InfodirectoryB2B .com is an emerging online B2B marketplace for Small & Medium Size Businesses, connecting global buyers with suppliers. The company offers a platform & tools to suppliers to generate business leads from global buyers, who use the platform to find reliable & compemore...
4" Submersible Genie Series 5" Submersible Nile Series Nile+ Series 6" Submersible Delma Series Binda 6D Series 6/7, 6/8, 8/10 Combination Submersible Congo Series 8" Submersible Bhima Series 5/4", 6" Stainless Steel Submersible Nile+ Series steelix Series more...
NEC Bore well Air Compressor Pumps are designed for domestic , Industrial and agricultural purposes are provided with high operating efficiency compressor that can draw water from depths of 100 ft. to 600 ft.They are assembled with special duty Compressor Motor for quality & relimore...
Borewell Compressor Pump offered is engineered under the firm direction of experienced quality controllers.crank and connecting rod are made of special alloy steel forgings. more...
Pump contracted by Stainless steel pipe, Noryl Glass Filled casings, impellers and SS410 shaft. Stator body contracted Stainless steel pipe. Stator made by laminated stamping winding with electric grad copper wire and high quality insulated materials. Dynamically balanced Rotor mmore...
Hi-tech breather valves increase the efficency and it is easy to clean or replace Provision of oil indicator to check the oil level clearly Special provision to adjust the belt tension Single compressor with double cylinders can be used in two borewells simultaneously Can be opermore...
Being a client-focused entity, we are involved in providing Borewell Submersible Pumps. Applications: - Residential and commercial places Use.Huge assortment of Borewell Submersible Pumps is offered by us, these products are appreciated among the customers due to their supreme qumore...
Texmo Bore well compressor pumps are designed for drawing water from deep bore wells of diameter over 4 inches. They are coupled with high quality motors to ensure efficient performance. Also available in Monobloc versions where the motor and compressor are assembled into a singlmore...
Taro Stainless steel Bore well submersible pumps are suitable for corrosive environments. The weight to power ratio of these pumps is very low compared to conventional cast iron pumps. This facilitates easy handling and low installation cost. more...
Taro Bore well submersibles are manufactured both in radial and mixed flow designs. The motor portion is a squirrel cage wet type water cooled induction motor with stainless steel stator shell to prevent rust formation. Specially designed thrust bearing is provided for long life.more...
Columbia borewell water lifting compressor pump for agriculture, factories, housing complexes, domestic and for many more applications with a simple method. Compressor pressure lift the water from 150 feets to maximum 950 feets . These pumps are suited for continuous operations wmore...