As a trusted name, we make use of only premium packaging material to pack the products in order to ensure their complete safety during transit. Moreover, our packaging experts strictly check the same. We are supported by such storage facility that...
BENZEAR Oil collector is used to collect waste oil from Two-Wheeler lift. Fitted with stainless steel tray with preforated filter, easy movable with pivot wheel, capacity of 25 litres & powder coated....
Purity : Simple Structure, Lightweight,Less Pressure Drop, Big Surface,High Demisting Efficiency,Convenient For Installation, Operation, Maintenance,Long Service Life,99% Efficiency Under General Conditions,Over 98% Open Area, Minimal Pressure Drop,Suitable For Va
Efficiency : Capable Of Removing Over 99.5% Of Liquid Droplets. Effective For Particles ≥ 20 µm And 8 µm, Depending On Configuration. High Separation Efficiency Even At High Gas Velocities And Liquid Loads
Vane Pack Type : Chevron Type Vane Pack - Specially Designed Vanes With Precise Flow Path Geometry. Suitable For Horizontal Or Vertical Flow
Material : SS316 / SS314 (other Materials Available Upon Request)
Size & Configuration : Custom-built As Per Project Specifications Or Quotation. Available In Multiple Vane Geometries Depending On Service Conditions
Supply Type : Manufacturer
Application : High-performance Separation Of Liquid Particles From Gas Streams In Process Systems
Key Advantages : Suitable For High Velocity Gas Streams. Handles High Liquid Loading And High Liquid Viscosity. Resistant To Fouling And Clogging. Long Corrosion Life Due To High-grade Stainless Steel. Low Pressure Drop For Energy-efficient Operation
Selection Criteria : Depends On Gas Or Vapor Flow Rate, Entrained Liquid Content, Droplet Size Distribution, Separation Efficiency Required, Allowable Design Velocity, Physical And Chemical Properties Of Gas And Liquid Phases, And Material Of Construction
Number Of Flower : Mist Eliminators
Efficiency : Up To 99% For Particles As Small As 5 Microns
Installation Details : Consists Of Wire Mesh Pad Sandwiched Between Top Hold-down Grid And Bottom Support Grid. Pad Is Slightly Oversized For Tight Fit Within Vessel. Annular Support Ring Should Be Welded To Vessel Wall. Pad And Grid Assembly Secured Using Tie Wires Or Spacer P