Minimum Thicknesses : As low as 1.5mm (0.062 in) to 6.25mm (0.25 in)depending on the material
Size Limits : : 30 g to 12 kg (1 oz to 25lb)
The metal pattern is first heated at a temperature of 200 0 C 392 0 F.Then covered with a mixture of sand and thermo set plastic. It forms a skin of sand plastic mixture of about 3.5 mm (0.125 inch) which adheres to the pattern. The shell mold is formed after the skin gets removemore...
We are excellent manufacturer and suplier of sand casting and sand mould casting products. The main disadvantage of sand mould casting process is that each time a casting is made, the mould is destroyed. The product is made as per clients' requirements and drawin. Advantages more...
The metal pattern is first heated at a temperature of 200 0 C / 392 0 F.Then covered with a mixture of sand and thermo set plastic. It forms a skin of sand/ plastic mixture of about 3.5 mm (0.125 inch) which adheres to the pattern. The shell mold is formed after the skin more...
Some of the products made using Gravity Die casting process are Housings, Junction boxes, impellers, Valve bodies, Flanges, Manifolds, Actuator bodies, Compressor parts, Electrical fittings parts, Covers. Permanent mould casting get their name from the fact more...
This process derives its name from the presence of moisture in molding sand and is indicator of the unbaked nature of the mould. Raw sand is obtained and processed to provide a consistent distribution of grain sizing. A variety of additives such as pitch, cellulose, and silica more...
We prepare sand as per the ratio to action the shell mould cakes. Quality shells are obtained by the use of graded sand with the mixture of exact ratio. Shell mould sand are pre-heated and heated to the appropriate temperature to obtain the flawless castings. Silicon ore are usedmore...
We do have associate with shell making industries in southern region who deserves to make quality shell and cones. We prepare sand as per the ratio to action the shell mould cakes. Quality shells are obtained by the use of graded sand with the mixture of exact ratio. Shell mould more...
Resm Coated sands are the one which makes the mould to release the gas freely from the mould while the molten metals are poured In India we are associated with large number of concerns who support us and gives priority to us. The sands are ordered as per the casting requirement gmore...
Shell molding, also known as shell-mold casting is an expendable mold casting process that uses a resin covered sand to form the mold. As compared to sand casting, this process has better dimensional accuracy, a higher productivity rate, and lower labor requirements. It is used fmore...
Salient Features : Cooling system ensure constant temperature and moisture to the return sand Sand movement effected by the fluidization property of sand and vibratory motion Etc
Return Sand Temperature, after the vibratory shake out in a mechanized green sand foundry is around ZOOGC. The sand temperature is highest arbacent to the metal surface and lowest away job it. The quantity of heat to be removed depends on the sand to metal ratio and the holding tmore...
Highest Quality Aluminum Casting and Machined Parts manufactured as per Customer's Drawing. Facilities Available : Tool Room to make Mould Tilt Pour Machine Coruse Shoooter Machine Cutting Machine Heat Treatment Plant Shot Blasting Machine Major industries we servedmore...
For Buyer 
For Seller 
Help 
08047022560
