Applications :

• Water supply
• Building Services
• Circulating Water Systems
• Paper Mills
• Water/Effluent Treatment
• Pharmaceuticals
• Irrigation
• Sugar Mills
• Ports and Docks
• Vegetable Oil Mills
• Air Conditioning
• General Industry Requirements
• Fire fighting

Applications :

• High Efficiency and High Discharge rate at less power Consumption.
• Casing and Impeller are made of SS 316
• Anticorrosive stainless steel shaft.
• Impeller is dynamically balanced for low noiseand longer bearing life.
• Long life due to replaceable wearing parts.
• Easy spares availability
• Suction lift up to 8 meters.
• Extremely simple in construction , Easy Maintenance and Easy gland packing replacement.
• Available in various pipe sizes.
• Sealing arrangement with mechanical seal is standard supply, gland packing arrangement available on request.
• Mechanical seal with Carbon – Ceramic with S.S. Spring.
• Gland Packing (if fitted with) PTFE.
• SCFZ Series suitable for B5 TYPE IEC Motors.
• All models are available in 60 Hz on request.

Magnetic drive design eliminates the conventional method of shaft coupling. Hence the pump casing is fully sealed from drive end which gives away the use of conventional sealing system . There is no seal used and so no troublesome seal repairing and replacement , leakage or production lost. Impeller and drive magnets are permanent rare earth magnets. They prevent slippage and ensure that full motor horsepower is converted into pumping power. All Pumps are rated for continuous duty with class “E” Insulation. All pumps are Centrifugal Semi-Open Impeller Type pumps and need priming before start up. SS-316 Magnetic pumps are available upto 5 HP

Applications & User Industries : Ideal for transfer of corrosive chemicals , plating chemicals , acids, dyes , solvents , toxic & fuming liquids , petrol , kerosene etc. Useful in chemical industries , pharmaceuticals and food processing industries. Electroplating , Galvanizing / Anodizing plants. Laboratory equipments and PCB palnts. Medical equipments and X-Ray film plants. Textile Dyeing houses. Liquid dispencing machines and Chemical Filtration equipments. For hazardous duty conditions with flame proof motors.High Efficiency due to permanent magnet power coupling.

Advantages Features : 100% Leak Proof pumps due to magnetic drive arrangement. No shaft seal is used which automatically solves the problem of seal leakage and wear & tear. Friction free operation for reduced power consumption. High power permanent magnets ensure full power transfer and eliminates slippage. All pumping parts are Non-metallic, Which gives superior corrosion resistance, Simple and easy to operate, has Long life , is reliable and has trouble free operation.

Operating Temp : PP upto 80 deg C , PVDF upto 110 deg C Special Pumps for high temperature upto 150ºC and 250ºC for SS-316.

We have a team of professionals who keep their vigil eyes on the entire lot that is stored in the warehouse. This unit keeps the lot free from the factors like duct, rain, sunlight, etc. Our company is capable of delivering consignments on time owing to an efficient trading network we have.

Features :

• Small size bare / monobloc poly propylene pumps.
• Fitted with seal / gland or PTFE bellow Mechanical seal.
• Shaft is of SS-304 / 316 with ceramic coating and (PTFE coating ptional)
• Very economical models as pumps made with minimum parts.
• Very easy maintenance.

Application : Phosphoric acid plants, Gas washing plants, Rayon plants, caustic soda plants for corrosive acids & basics, effluent treatment handling.

Application : All clear liquids without solid suspensions like diesel, petrol, LPG, oil, solvents, syrup, dm water, chemicals, steam boiler feeding, evacuation of condensate water, boosting of pressure, as a drum/barrel pump.

Features : 

• All wetted parts of pumps are made from lost wax process (investment casting), so surface finish is excellent. Smooth flow path/ hydraulic passage and no casting defects like blow holes, cracks etc. are present.
• Centripetal / regenerative impeller for better suction.
• Pumps will be normally available in CF-8m /CF-8 (Gun metal, Alloy-20) and also in other material as per customer's requirements.
• Single /multistage pumps to handle crystal clear liquids for high pressure duties.
• Very quick priming & no need of foot valves.
• Very high suction capacity up to 8 meters without much noise
• Various types of sealing arrangements as per customer's liquid's characteristics.
• Normally fitted with carbon/ceramic seal faces with teflon cup and viton rubber.
• Pumps are available in monoblock and in bare type also with flameproof motor.
• All motors are of "TEFC" type
• Pump can be offered with electro polishing for some special requirements.
• Can handle temperature up to 80oC
• Trolley mount available.
• Also available with 120 Volt / 60 Hz.
• Custom built pumps are available.

Applications :

• Flood Control
• Water Treatment
• Shipping
• Ground Water Development and Irrigation
• Cooling Water (power)
• Dewatering and Water Supply (mining)
• Agriculture

OPERATING RANGE

• Flows to 181700 m3/h (800 000 gpm)
• Heads to 11 m (35 ft)
• Speeds to 1770 rpm
• Ground Water Development and Irrigation
• Cooling Water (power)
• Dewatering and Water Supply (mining)
• Agriculture
• Sizes 200 mm (8 in) to 3.1 m (123 in)
• Settings to 8 m (25 ft)
• The VAF is a combination of vertical high efficiency & axial flow impeller pump .
• We have a complete range of this type of pumps which are suited for applications that require large quantities of flow with low head.

Advantages :

• No Seal, No Leakage
• Self Priming, No need of foot valve
• Variable flow with pump.
• Can be submerged.
• Less stock of spare to be maintain.
• No Skilled person is needed to
• operate and repair pump.
• Light weight, handy in use.
• No rotation, no wear & tear, hence
• low maintenance.
• No Charging.
• Pump can run dry.
• Stops automaticlly on closing of discharge valve.
• Can handle 2 to 10 mm sized solid particles.
• Also can be used upto accuracy 3 to 5%
• No Motor, No fire.
• In short very simple and versatile pump.

Operation Principle :

• Dry air is given as input to air valve.
• Air will push both diaphragm alternatively.
• Four ball valves will act as NRV for suction and delivery.
• As per liquid compatibility MOC of diaphragm, Valve and wet part selected.

Application: 

Public utilities :

• For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
• Dewatering Basements, Trenches, Construction sites.
• Onboard shift, as bilge, for desk wash & engine cooling
• Tiles & Marble factories, effluent plants.

Mobile Machinery :

• Cooling water for marine engines and shovels.
• Any application where priming is to be avoided.

Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.

Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.

Naval duty : Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.

Waste treatment: pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension; dosing neutralizing liquids; pumping out settled sludge.

Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with w ell point system or drains; water supply from wells or canals; hosing down concrete castings.

Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilizers, distribution of liquid animal feed; transfer of must; washing

We are a chief Manufacturer, Exporter and Importer of the premium quality Stainless Steel Barrel Pump. We offer a wide range of Stainless Steel Barrel Pump to our widely spread clients. The demand for our Stainless Steel Barrel Pump has increased gradually as it offers various enormous features and serves to various purposes.

Features :

• Durable
• High performance
• Reasonable prices
• strength

Specifications :

• Size : 50 / 25 mm
• Fow : 110 L / min
• Head : 7.5 m
• Power : 0.88 Kw
• Speed : 10000 rpm
• Voltage : 220 V , 50 Hz

Product Details :

• Measurement : 145 x 33 x 22 cm
• Gross Weight : 16.8 Kgs
• Price : Rs. 19, 500 / -

AC MOTOR SPECIFICATION

0.5 hp x 1450 rpm, Non Flame Proof Motor Totally enclosed Fan cooled Squirrel cage Induction Motors, Horizontal Foot mounted B3 Construction,

Continuously rated S1 Duty suitable for single phase , 220 volts , 50 Hz , AC Supply (110 volts or 60 Hz Available on request)with ambient 45ºC & class “F” Insulation.

Features :

• Construction : All wet parts coming in contact with liquid pumped are either lined on cast Iron or made appropriate corrosion resistance Non-Metalics.
• Drive : Pumps are mainly arranged from a coupling drive or V belt drive on request
• Impeller : Semi-Open type rubber lined Impeller handles maximum solid particles without load on pump's Efficiency
• Shaft : EN-9 OR SS 316
• Sleeve : Alloy-20, Ceramic, FRP
• Ball Bearing : Inboard bearing is pressed on shaft (En-9 / SS 316) and is free to float axially in frame which carries radial load only. Outboard bearing is shouldered red and locked on shaft with locknut and washer and in bearing housing to carry radial and any unbalanced thrust load. All bearing fits are precision bored.
• Gland Packing : Pumps are fitted with gland packing compatible with the liquid to be handled.

Applications :

• Hydraulic Acid at all Concentrations
• Dilute Sulphuric Acid
• Pigment Slurries
• Lime Slurry / Milk of Lime
• Phosphoric Acid Solutions
• Paper Stock
• Industrial effluents
• Ore Slurries
• Acidic Slurries
• Abrasive Slurries
• Sea Water

Pumps are single suction multistage segment centrifugal pumps which adopt energy-efficient hydraulic model, confirm   to   centrifugal   pump   technical   condition   with   wide   performance   range,    high   efficiency, reasonable structure , safe and steady operation, low noise, long life performance, easy installation and maintenance.

A fire pump is a part of a fire sprinkler system's water supply and can be powered by electricity, diesel or steam. The pump intake is either connected to the public underground water supply piping, or a static water source (e.g. tank, reservoir, lake). The pump provides water flow at a higher pressure to the sprinkler system risers and hose stand pipes. A fire pump is tested and listed for its use specifically for fire service(by a third-party testing and listing agency if required).

Features :

• Uni-casing, so no air lock problem.
• Balanced and rigged construction.
• No centrifugal switch.
• Less operational and maintenance cost.
• Self priming no need of foot valve
• Up to 2 hp
• Max head-10 Bar, Max fow 100 Lpm

Our capacious warehouse is installed with all required amenities essential for safe storage of the products. Furthermore, our warehousing system is efficiently managed by our team of experts. We are comfortable with online and traditional payment methods. Our policies related to payment procedures are transparent. We believe in professionally managing payment agreements.

Features :

• Oil - less construction (no lubricating oil or grease required) needs no
• maintenance.
• High pressure output comes from efficiency-oriented Â�gno
• nonsenseÂ�h design
• Differential operation (one suction and two discharges per
• cycle)keeps the discharge fluctuations very low.
• Close coupled construction eliminates problems normally associated
• with the motor drive, such as belt slipping.
• Design that fully utilizes rolling frictions (utility model and design
• registration being applied for)keeps the starting torque to minimum
• and provides maximum output.
• Simple and rugged construction permits easy disassembly cleaningand re assembly.
• Compact and super lightweight structure makes it handy and portable.
• Newly developed universal nozzle
• permits almost every washing job with wase.

Application :

• Air conditioner cleaning.
• Car engine compartment cleaning.
• Washing and finishing in plasterer
• work.
• Food processing equipment cleaning.
• Farm tool and machine cleaning
• Insecticide spraying in gardens and to
• trees
• Printing machine cleaning.
• Steel pipe cleaning.
• Hydro testing.

Features :

• A Range of high quality positive displacement gear pumps for fuel injection in industrial burners.
• These pumps provide fuel at finely controlled pressure and flow rates for optimum combustion resulting in long term fuel saving and reduced pollution.
• The perfectly designed and perfectly finished which having lost wax method known as investment casting & having grade 30c Iron and stainless steel
• 40 % Weight reduce compared to regular model
• Standard mounting & easy to install.
• Manufactured from specially selected material & processed to close to lerances for a long, trouble free working life.
• Gear & shaft of alloy steel & heart treated.
• Mechanical dynamic oil seal system for high temperature & high speed use, for zero leakage.
• Self lubrications, Self priming
• Built in pressure valve
• Standard mounting dimensions for easy replacement, gear pump exporter

Applications :

• Oil Burner, Boilers, Hydraulic drive and Pressure pump
• Force feed lubrication
• Booster pump for heavy diesel engineers
• Pumping for filtration
• Bitumen tank burner
• Dryer burner of hot mix plant
• Most suitable for LSHS furnace oil, L.D.O. HSD

Applications :

• Agriculture / Industrial purpose
• Mineral Water & Soda Water Plants
• State Transport & Workshop
• Auto Two & Four Wheel Workshop
• Boiler & Steam Engines
• Railway Workshop & Cleaning Yards
• Airport & Ship Yards

Application :

• Body made glass filled polypropylene with PTFE vanes
• Viton rubber seals & ss hardware suitable for 50 – 210 lit drums.
• Recommended for use with water based chemicals acids & all petroleum based fluids.
• Pipe tube length.
• Do not use with solvents, acetone, turpentine etc
• In Built Filters

Applications :

For pumping Clear/Turbid water/Chemicals & Volatile Liquids. Air conditional plants, power station, Mine Drainage, Sprinkle systems fire fighting, Booster service, Oils Brine.

Features :

• No mechanical seal, stuffing box and internal bearings is needed
• No maintenance since the pump can even run dry indefinitely as there is no packing, bushes or internal Bearings.
• Reduction of downtime production losses in view of above features.
• All the wet-end parts are in solid molded construction to with stand corrosion and erosion.
• The impeller is semi-open type and used in our all-vertical pumps to suit both clear and polluted fluids.
• Pump mounted outside the suction tank and is not submerged type.
• Polypropylene is manufactured by solid injection molding process with high pressure hence.

Applications :

• Water treatment Plant
• Effluent Treatment
• Filter Press for dyes and chemicals
• Fertilizer Plants Thermal and atomic power plants
• Drugs & Pharmaceutical Industries
• Descaling of Tubes
• Scrubbing of corrosive gases like Cl2, Br, I, SO2, NH3, F2 Etc.
• Excellent for vacuum ejectors
• Transferring of concentrated HCL from road tankers
• Paper & Pulp industries
• Pickling in steel rolling mills
• Caustic soda plants : Chlorinated brine, conc. HCL, H2SO4 etc. Other application are in metal refineries, pickling Installations, paper and fertilizer
• plants-in fact all chemical process industries.
• Phosphoric Acid Plants : H3PO4, H2SO4, HF and their mixtures with or without solid (gypsum) up to 40% conc.
• Gas Washing Plants : Scrubbed liquids containing F, CL, SO2, Ammonia gases etc. With solids replace hast alloy.
• Rayon Plants : Spin bath solution (H2SO4, ZNSO4, NASO4, etc.)

These special type of pumps have been designed to float in rivers, lakes and sump where level of liquid is changing constantly and sometimes liquid requires positive or low suction. Following are the special features of the pumps.

• Can Take both axial and radial loads, specially designed to take thrust loads due to high currents in rivers.
• The centre of gravity is maintained in such a way that the pump will always be in position and even if some heavy logs/animals / external forces in the river try to change its position the pump tends to come to its original floating position when the external lateral force is removed.
• Very easy to maintain: High power/energy savings as compared to high suction pumps.
• Pump and floating platform can be made from M.S, PP or SS as per requirement.
• As floating pump can run in the water , such pumps are useful for simplifying the earth work and engineering construction of pumping station, thus reducing installation area and saving 3040% of the total project cost.
• Can solve the flood resistance problem of those rivers and lakes which have large fluctuation of water levels.
• Can be supplied up to 200 meter head and 1000 M3/hr
• Floating pumps removes the need for any civil construction on the river banks.
• Floating pumps are not affected by the fluctuations of the water (tide) levels. Since the pump is always floating, it ensures that the impeller remains submerged. Pump is under water or has very low suction head due to floating platform in surface pump.
• Since these pumps are floating , the issue of depth of suction is ruled out.
• Very useful when suction lift is very high.
• Very useful for slurry , hot water and for mining application.
• Always made as per customer's requirement and we use different type of pump and platform as per characteristics of liquid .

Applications :

• ACH Type pumps are used in Chemical & Petrochemicals Industry, Food Industry, Dyeing , Sugar Industry, Paper & Pulp Industry, Fertilizer Units & Etc.
• Handling of all types of Liquids , Acids , Alkalis , Dyes , Hydrocarbons , Corrosive Slurries (Solids Up to 15 mm) , Green , Black Liquor , Pulp (Consistency up to 2%) & Etc.

 “PHULSONS ”  range of immiscible pumps has been designed especially for filtering systems in the machine tool industry. The low-pressure pumps are available in different flow variants and come with a choice of bottom suction or top suction from the volute.

The compact  coolant pumps efficiently transport liquid containing chips, fibers  and  abrasive particles on to the filtering unit. Semi open impellers allow the passing of chips up to 10 mm, making the pumps ideal for removing liquid from any machining process- like boring and milling to grinding.

FEATURES

• Available in very wide range.
• High flexibility of Design.
• Availability in any type of material like CI, SS-316, SS-304
• Bronze, Alloy-20 Etc.
• Balanced Shaft & Rotor with excellent grade stamping & wire so highly efficient motor
• Totally Noiseless Operation.
• Available in any length and for any Liquid.
• Extruded powder coated motor body (up to 1 hp)
• No shaft seal (100% Maintenance free)
• Semi Open Impellers (Ensure free passage of solids and chips)
• Large stock, Earliest Delivery.

HIGH - QUALITY MATERIALS

Carefully chosen materials ensure trouble free operation and long life. The top of the pump is made of cast iron, while the impeller is available in composite Bronze/aluminum/engineering plastic are used in pumps with flow up to 1000  L/min. In the bigger pumps with higher flow, impellers are made of bronze to ensure perfect resistance to abrasive materials like metal chips. As the pumped liquid will always contain oil there no risk of corrosion.

HIGH - QUALITY MATERIALS

In addition to the range for filtering systems, we offer a wide range of pumps for the cooling and cleaning of tools inside the machine.

This allows our customers the benefit of convenience and time –saving one stop shopping.

Applications :

• Water treatment Plant
• Effluent Treatment
• Filter Press for dyes and chemicals
• Fertilizer Plants Thermal and atomic power plants
• Drugs & Pharmaceutical Industries
• Descaling of Tubes
• Scrubbing of corrosive gases like Cl2, Br, I, So2, NH3, F2 Etc.
• Excellent for vacuum ejectors
• Transferring of concentrated HCL from road tankers
• Paper & Pulp industries
• Pickling in steel rolling mills
• Caustic soda plants : Chlorinated Brine , Conc. HCL , Dilute H2SO4 etc.
• PHOSPHORIC Acid Plants : H3PO4 , H2SO4 , HF and their mixtures with or without solid (gypsum) up to 40% conc.
• Gas Washing Plants : Scrubbed Liquids containing CL2, BR2, F2, I2, SO2, SO3, CO2, NH3, Gases etc. with solids replace Hast Alloy.
• Rayon Plants : Spin bath solution (H2SO4, ZNSO4, NaSo4, etc.)
• Electro Plating

“MALHAR” Barrel pumps works in reciprocating action. Barrel pump is useful for safe and efficient handling of highly corrosive chemicals, solvents, acids, petroleum products diesel oil, and fuel oils, plating solution, toxic chemicals etc. It eliminates danger of spillage explosion hazards. Construction of MALHAR Pump is such that operating compressed air never gets in contact with pumped liquid. The pump can be directly inserted in to the barrel threading provide on the pump adapter. It sucks the liquid from the bottom and hence less chances of leftover material. It does not have any type of motor and hence virtually zero maintenance.

Applications :

• MALHAR pump operates on compressed air of 4 to 6 kg/ cm2
• Adjustable flow rate.
• Self-priming
• Easy to lubricate.
• Easy to maintain
• Light weight.

With the assistance of our automated warehousing system, we are able to properly organize and stack the products in our well-structured warehouse. Thus, we ensure zero defects at buyer's end. Buyers can trust us to make delivery of consignments since; we have collaborated with reckoned transportation service providers.

Applications :

• Water supply
• Building Services
• Circulating Water Systems
• Paper Mills
• Water/Effluent Treatment
• Pharmaceuticals
• Irrigation
• Sugar Mills
• Ports and Docks
• Vegetable Oil Mills
• Air Conditioning
• General Industry Requirements
• Fire fighting

Applications :

• High Efficiency and High Discharge rate at less power Consumption.
• Casing and Impeller are made of SS 316
• Anticorrosive stainless steel shaft.
• Impeller is dynamically balanced for low noiseand longer bearing life.
• Long life due to replaceable wearing parts.
• Easy spares availability
• Suction lift up to 8 meters.
• Extremely simple in construction , Easy Maintenance and Easy gland packing replacement.
• Available in various pipe sizes.
• Sealing arrangement with mechanical seal is standard supply, gland packing arrangement available on request.
• Mechanical seal with Carbon – Ceramic with S.S. Spring.
• Gland Packing (if fitted with) PTFE.
• SCFZ Series suitable for B5 TYPE IEC Motors.
• All models are available in 60 Hz on request.

Magnetic drive design eliminates the conventional method of shaft coupling. Hence the pump casing is fully sealed from drive end which gives away the use of conventional sealing system . There is no seal used and so no troublesome seal repairing and replacement , leakage or production lost. Impeller and drive magnets are permanent rare earth magnets. They prevent slippage and ensure that full motor horsepower is converted into pumping power. All Pumps are rated for continuous duty with class “E” Insulation. All pumps are Centrifugal Semi-Open Impeller Type pumps and need priming before start up. SS-316 Magnetic pumps are available upto 5 HP

Applications & User Industries : Ideal for transfer of corrosive chemicals , plating chemicals , acids, dyes , solvents , toxic & fuming liquids , petrol , kerosene etc. Useful in chemical industries , pharmaceuticals and food processing industries. Electroplating , Galvanizing / Anodizing plants. Laboratory equipments and PCB palnts. Medical equipments and X-Ray film plants. Textile Dyeing houses. Liquid dispencing machines and Chemical Filtration equipments. For hazardous duty conditions with flame proof motors.High Efficiency due to permanent magnet power coupling.

Advantages Features : 100% Leak Proof pumps due to magnetic drive arrangement. No shaft seal is used which automatically solves the problem of seal leakage and wear & tear. Friction free operation for reduced power consumption. High power permanent magnets ensure full power transfer and eliminates slippage. All pumping parts are Non-metallic, Which gives superior corrosion resistance, Simple and easy to operate, has Long life , is reliable and has trouble free operation.

Operating Temp : PP upto 80 deg C , PVDF upto 110 deg C Special Pumps for high temperature upto 150ºC and 250ºC for SS-316.

We have a team of professionals who keep their vigil eyes on the entire lot that is stored in the warehouse. This unit keeps the lot free from the factors like duct, rain, sunlight, etc. Our company is capable of delivering consignments on time owing to an efficient trading network we have.

Features :

• Small size bare / monobloc poly propylene pumps.
• Fitted with seal / gland or PTFE bellow Mechanical seal.
• Shaft is of SS-304 / 316 with ceramic coating and (PTFE coating ptional)
• Very economical models as pumps made with minimum parts.
• Very easy maintenance.

Application : Phosphoric acid plants, Gas washing plants, Rayon plants, caustic soda plants for corrosive acids & basics, effluent treatment handling.

Application : All clear liquids without solid suspensions like diesel, petrol, LPG, oil, solvents, syrup, dm water, chemicals, steam boiler feeding, evacuation of condensate water, boosting of pressure, as a drum/barrel pump.

Features : 

• All wetted parts of pumps are made from lost wax process (investment casting), so surface finish is excellent. Smooth flow path/ hydraulic passage and no casting defects like blow holes, cracks etc. are present.
• Centripetal / regenerative impeller for better suction.
• Pumps will be normally available in CF-8m /CF-8 (Gun metal, Alloy-20) and also in other material as per customer's requirements.
• Single /multistage pumps to handle crystal clear liquids for high pressure duties.
• Very quick priming & no need of foot valves.
• Very high suction capacity up to 8 meters without much noise
• Various types of sealing arrangements as per customer's liquid's characteristics.
• Normally fitted with carbon/ceramic seal faces with teflon cup and viton rubber.
• Pumps are available in monoblock and in bare type also with flameproof motor.
• All motors are of "TEFC" type
• Pump can be offered with electro polishing for some special requirements.
• Can handle temperature up to 80oC
• Trolley mount available.
• Also available with 120 Volt / 60 Hz.
• Custom built pumps are available.

Applications :

• Flood Control
• Water Treatment
• Shipping
• Ground Water Development and Irrigation
• Cooling Water (power)
• Dewatering and Water Supply (mining)
• Agriculture

OPERATING RANGE

• Flows to 181700 m3/h (800 000 gpm)
• Heads to 11 m (35 ft)
• Speeds to 1770 rpm
• Ground Water Development and Irrigation
• Cooling Water (power)
• Dewatering and Water Supply (mining)
• Agriculture
• Sizes 200 mm (8 in) to 3.1 m (123 in)
• Settings to 8 m (25 ft)
• The VAF is a combination of vertical high efficiency & axial flow impeller pump .
• We have a complete range of this type of pumps which are suited for applications that require large quantities of flow with low head.

Advantages :

• No Seal, No Leakage
• Self Priming, No need of foot valve
• Variable flow with pump.
• Can be submerged.
• Less stock of spare to be maintain.
• No Skilled person is needed to
• operate and repair pump.
• Light weight, handy in use.
• No rotation, no wear & tear, hence
• low maintenance.
• No Charging.
• Pump can run dry.
• Stops automaticlly on closing of discharge valve.
• Can handle 2 to 10 mm sized solid particles.
• Also can be used upto accuracy 3 to 5%
• No Motor, No fire.
• In short very simple and versatile pump.

Operation Principle :

• Dry air is given as input to air valve.
• Air will push both diaphragm alternatively.
• Four ball valves will act as NRV for suction and delivery.
• As per liquid compatibility MOC of diaphragm, Valve and wet part selected.

Application: 

Public utilities :

• For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
• Dewatering Basements, Trenches, Construction sites.
• Onboard shift, as bilge, for desk wash & engine cooling
• Tiles & Marble factories, effluent plants.

Mobile Machinery :

• Cooling water for marine engines and shovels.
• Any application where priming is to be avoided.

Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.

Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.

Naval duty : Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.

Waste treatment: pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension; dosing neutralizing liquids; pumping out settled sludge.

Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with w ell point system or drains; water supply from wells or canals; hosing down concrete castings.

Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilizers, distribution of liquid animal feed; transfer of must; washing

We are a chief Manufacturer, Exporter and Importer of the premium quality Stainless Steel Barrel Pump. We offer a wide range of Stainless Steel Barrel Pump to our widely spread clients. The demand for our Stainless Steel Barrel Pump has increased gradually as it offers various enormous features and serves to various purposes.

Features :

• Durable
• High performance
• Reasonable prices
• strength

Specifications :

• Size : 50 / 25 mm
• Fow : 110 L / min
• Head : 7.5 m
• Power : 0.88 Kw
• Speed : 10000 rpm
• Voltage : 220 V , 50 Hz

Product Details :

• Measurement : 145 x 33 x 22 cm
• Gross Weight : 16.8 Kgs
• Price : Rs. 19, 500 / -

AC MOTOR SPECIFICATION

0.5 hp x 1450 rpm, Non Flame Proof Motor Totally enclosed Fan cooled Squirrel cage Induction Motors, Horizontal Foot mounted B3 Construction,

Continuously rated S1 Duty suitable for single phase , 220 volts , 50 Hz , AC Supply (110 volts or 60 Hz Available on request)with ambient 45ºC & class “F” Insulation.

Features :

• Construction : All wet parts coming in contact with liquid pumped are either lined on cast Iron or made appropriate corrosion resistance Non-Metalics.
• Drive : Pumps are mainly arranged from a coupling drive or V belt drive on request
• Impeller : Semi-Open type rubber lined Impeller handles maximum solid particles without load on pump's Efficiency
• Shaft : EN-9 OR SS 316
• Sleeve : Alloy-20, Ceramic, FRP
• Ball Bearing : Inboard bearing is pressed on shaft (En-9 / SS 316) and is free to float axially in frame which carries radial load only. Outboard bearing is shouldered red and locked on shaft with locknut and washer and in bearing housing to carry radial and any unbalanced thrust load. All bearing fits are precision bored.
• Gland Packing : Pumps are fitted with gland packing compatible with the liquid to be handled.

Applications :

• Hydraulic Acid at all Concentrations
• Dilute Sulphuric Acid
• Pigment Slurries
• Lime Slurry / Milk of Lime
• Phosphoric Acid Solutions
• Paper Stock
• Industrial effluents
• Ore Slurries
• Acidic Slurries
• Abrasive Slurries
• Sea Water

Pumps are single suction multistage segment centrifugal pumps which adopt energy-efficient hydraulic model, confirm   to   centrifugal   pump   technical   condition   with   wide   performance   range,    high   efficiency, reasonable structure , safe and steady operation, low noise, long life performance, easy installation and maintenance.

A fire pump is a part of a fire sprinkler system's water supply and can be powered by electricity, diesel or steam. The pump intake is either connected to the public underground water supply piping, or a static water source (e.g. tank, reservoir, lake). The pump provides water flow at a higher pressure to the sprinkler system risers and hose stand pipes. A fire pump is tested and listed for its use specifically for fire service(by a third-party testing and listing agency if required).

Features :

• Uni-casing, so no air lock problem.
• Balanced and rigged construction.
• No centrifugal switch.
• Less operational and maintenance cost.
• Self priming no need of foot valve
• Up to 2 hp
• Max head-10 Bar, Max fow 100 Lpm

Our capacious warehouse is installed with all required amenities essential for safe storage of the products. Furthermore, our warehousing system is efficiently managed by our team of experts. We are comfortable with online and traditional payment methods. Our policies related to payment procedures are transparent. We believe in professionally managing payment agreements.

Features :

• Oil - less construction (no lubricating oil or grease required) needs no
• maintenance.
• High pressure output comes from efficiency-oriented Â�gno
• nonsenseÂ�h design
• Differential operation (one suction and two discharges per
• cycle)keeps the discharge fluctuations very low.
• Close coupled construction eliminates problems normally associated
• with the motor drive, such as belt slipping.
• Design that fully utilizes rolling frictions (utility model and design
• registration being applied for)keeps the starting torque to minimum
• and provides maximum output.
• Simple and rugged construction permits easy disassembly cleaningand re assembly.
• Compact and super lightweight structure makes it handy and portable.
• Newly developed universal nozzle
• permits almost every washing job with wase.

Application :

• Air conditioner cleaning.
• Car engine compartment cleaning.
• Washing and finishing in plasterer
• work.
• Food processing equipment cleaning.
• Farm tool and machine cleaning
• Insecticide spraying in gardens and to
• trees
• Printing machine cleaning.
• Steel pipe cleaning.
• Hydro testing.

Features :

• A Range of high quality positive displacement gear pumps for fuel injection in industrial burners.
• These pumps provide fuel at finely controlled pressure and flow rates for optimum combustion resulting in long term fuel saving and reduced pollution.
• The perfectly designed and perfectly finished which having lost wax method known as investment casting & having grade 30c Iron and stainless steel
• 40 % Weight reduce compared to regular model
• Standard mounting & easy to install.
• Manufactured from specially selected material & processed to close to lerances for a long, trouble free working life.
• Gear & shaft of alloy steel & heart treated.
• Mechanical dynamic oil seal system for high temperature & high speed use, for zero leakage.
• Self lubrications, Self priming
• Built in pressure valve
• Standard mounting dimensions for easy replacement, gear pump exporter

Applications :

• Oil Burner, Boilers, Hydraulic drive and Pressure pump
• Force feed lubrication
• Booster pump for heavy diesel engineers
• Pumping for filtration
• Bitumen tank burner
• Dryer burner of hot mix plant
• Most suitable for LSHS furnace oil, L.D.O. HSD

Applications :

• Agriculture / Industrial purpose
• Mineral Water & Soda Water Plants
• State Transport & Workshop
• Auto Two & Four Wheel Workshop
• Boiler & Steam Engines
• Railway Workshop & Cleaning Yards
• Airport & Ship Yards

DC-AC Diesel Transfer Pump that we offer is manufactured using quality approved basic material that adds durability to it. We are one of the prominent Manufacturers, Exporters and Suppliers of DC-AC Diesel Transfer Pump. It is tested on various quality parameters so as to ensure its defect-free mechanism. When it comes to delivery, we make all arrangements for quick shipment of DC-AC Diesel Transfer Pump.

Features :

• Cast iron pump body finished with anti-corrosionpaint

• Vane pump with sintered steel rotor and acetal resinvane

• By-pass valve incorporated in the pumpbody

• Direct current brush motor with permanent magnetstator

• Motor protection classIP55

• Used in intermittent service with 30-minute workcycles

• Maximum Head 10 Meters in DC Pumps and 20 MetersinACPumps.

Available in 12 and 24 Voltage versions provide with 3/4” threaded connectors on the pump body. Switch box and fuse carrier, reinforced base complete with power cables and pincers for connection to terminal strips.

Application :

• Ideal portable pump for diesel fuel, machineoil.

• As the primary system on earth-movingmachinery.

• On mobile fuel pumps on vehicles, such as pavingmachine, tractor, road roller, etc or in constructionyards.

DC / AC diesel pump Cast iron pump body complete anticorrosive paint.

Application :

• Body made glass filled polypropylene with PTFE vanes
• Viton rubber seals & ss hardware suitable for 50 – 210 lit drums.
• Recommended for use with water based chemicals acids & all petroleum based fluids.
• Pipe tube length.
• Do not use with solvents, acetone, turpentine etc
• In Built Filters

Applications :

For pumping Clear/Turbid water/Chemicals & Volatile Liquids. Air conditional plants, power station, Mine Drainage, Sprinkle systems fire fighting, Booster service, Oils Brine.

Features :

• No mechanical seal, stuffing box and internal bearings is needed
• No maintenance since the pump can even run dry indefinitely as there is no packing, bushes or internal Bearings.
• Reduction of downtime production losses in view of above features.
• All the wet-end parts are in solid molded construction to with stand corrosion and erosion.
• The impeller is semi-open type and used in our all-vertical pumps to suit both clear and polluted fluids.
• Pump mounted outside the suction tank and is not submerged type.
• Polypropylene is manufactured by solid injection molding process with high pressure hence.

Applications :

• Water treatment Plant
• Effluent Treatment
• Filter Press for dyes and chemicals
• Fertilizer Plants Thermal and atomic power plants
• Drugs & Pharmaceutical Industries
• Descaling of Tubes
• Scrubbing of corrosive gases like Cl2, Br, I, SO2, NH3, F2 Etc.
• Excellent for vacuum ejectors
• Transferring of concentrated HCL from road tankers
• Paper & Pulp industries
• Pickling in steel rolling mills
• Caustic soda plants : Chlorinated brine, conc. HCL, H2SO4 etc. Other application are in metal refineries, pickling Installations, paper and fertilizer
• plants-in fact all chemical process industries.
• Phosphoric Acid Plants : H3PO4, H2SO4, HF and their mixtures with or without solid (gypsum) up to 40% conc.
• Gas Washing Plants : Scrubbed liquids containing F, CL, SO2, Ammonia gases etc. With solids replace hast alloy.
• Rayon Plants : Spin bath solution (H2SO4, ZNSO4, NASO4, etc.)

These special type of pumps have been designed to float in rivers, lakes and sump where level of liquid is changing constantly and sometimes liquid requires positive or low suction. Following are the special features of the pumps.

• Can Take both axial and radial loads, specially designed to take thrust loads due to high currents in rivers.
• The centre of gravity is maintained in such a way that the pump will always be in position and even if some heavy logs/animals / external forces in the river try to change its position the pump tends to come to its original floating position when the external lateral force is removed.
• Very easy to maintain: High power/energy savings as compared to high suction pumps.
• Pump and floating platform can be made from M.S, PP or SS as per requirement.
• As floating pump can run in the water , such pumps are useful for simplifying the earth work and engineering construction of pumping station, thus reducing installation area and saving 3040% of the total project cost.
• Can solve the flood resistance problem of those rivers and lakes which have large fluctuation of water levels.
• Can be supplied up to 200 meter head and 1000 M3/hr
• Floating pumps removes the need for any civil construction on the river banks.
• Floating pumps are not affected by the fluctuations of the water (tide) levels. Since the pump is always floating, it ensures that the impeller remains submerged. Pump is under water or has very low suction head due to floating platform in surface pump.
• Since these pumps are floating , the issue of depth of suction is ruled out.
• Very useful when suction lift is very high.
• Very useful for slurry , hot water and for mining application.
• Always made as per customer's requirement and we use different type of pump and platform as per characteristics of liquid .

Applications :

• ACH Type pumps are used in Chemical & Petrochemicals Industry, Food Industry, Dyeing , Sugar Industry, Paper & Pulp Industry, Fertilizer Units & Etc.
• Handling of all types of Liquids , Acids , Alkalis , Dyes , Hydrocarbons , Corrosive Slurries (Solids Up to 15 mm) , Green , Black Liquor , Pulp (Consistency up to 2%) & Etc.

 “PHULSONS ”  range of immiscible pumps has been designed especially for filtering systems in the machine tool industry. The low-pressure pumps are available in different flow variants and come with a choice of bottom suction or top suction from the volute.

The compact  coolant pumps efficiently transport liquid containing chips, fibers  and  abrasive particles on to the filtering unit. Semi open impellers allow the passing of chips up to 10 mm, making the pumps ideal for removing liquid from any machining process- like boring and milling to grinding.

FEATURES

• Available in very wide range.
• High flexibility of Design.
• Availability in any type of material like CI, SS-316, SS-304
• Bronze, Alloy-20 Etc.
• Balanced Shaft & Rotor with excellent grade stamping & wire so highly efficient motor
• Totally Noiseless Operation.
• Available in any length and for any Liquid.
• Extruded powder coated motor body (up to 1 hp)
• No shaft seal (100% Maintenance free)
• Semi Open Impellers (Ensure free passage of solids and chips)
• Large stock, Earliest Delivery.

HIGH - QUALITY MATERIALS

Carefully chosen materials ensure trouble free operation and long life. The top of the pump is made of cast iron, while the impeller is available in composite Bronze/aluminum/engineering plastic are used in pumps with flow up to 1000  L/min. In the bigger pumps with higher flow, impellers are made of bronze to ensure perfect resistance to abrasive materials like metal chips. As the pumped liquid will always contain oil there no risk of corrosion.

HIGH - QUALITY MATERIALS

In addition to the range for filtering systems, we offer a wide range of pumps for the cooling and cleaning of tools inside the machine.

This allows our customers the benefit of convenience and time –saving one stop shopping.

Applications :

• Water treatment Plant
• Effluent Treatment
• Filter Press for dyes and chemicals
• Fertilizer Plants Thermal and atomic power plants
• Drugs & Pharmaceutical Industries
• Descaling of Tubes
• Scrubbing of corrosive gases like Cl2, Br, I, So2, NH3, F2 Etc.
• Excellent for vacuum ejectors
• Transferring of concentrated HCL from road tankers
• Paper & Pulp industries
• Pickling in steel rolling mills
• Caustic soda plants : Chlorinated Brine , Conc. HCL , Dilute H2SO4 etc.
• PHOSPHORIC Acid Plants : H3PO4 , H2SO4 , HF and their mixtures with or without solid (gypsum) up to 40% conc.
• Gas Washing Plants : Scrubbed Liquids containing CL2, BR2, F2, I2, SO2, SO3, CO2, NH3, Gases etc. with solids replace Hast Alloy.
• Rayon Plants : Spin bath solution (H2SO4, ZNSO4, NaSo4, etc.)
• Electro Plating

“MALHAR” Barrel pumps works in reciprocating action. Barrel pump is useful for safe and efficient handling of highly corrosive chemicals, solvents, acids, petroleum products diesel oil, and fuel oils, plating solution, toxic chemicals etc. It eliminates danger of spillage explosion hazards. Construction of MALHAR Pump is such that operating compressed air never gets in contact with pumped liquid. The pump can be directly inserted in to the barrel threading provide on the pump adapter. It sucks the liquid from the bottom and hence less chances of leftover material. It does not have any type of motor and hence virtually zero maintenance.

Applications :

• MALHAR pump operates on compressed air of 4 to 6 kg/ cm2
• Adjustable flow rate.
• Self-priming
• Easy to lubricate.
• Easy to maintain
• Light weight.