• Voltage220V

Positioning in the Plant : The chilling Tank along with chilling unit is installed after the cascade cooler.   Primary Function : It is one of the important stages of the process where moisture & CO 2 is separated partly from the air before entering the Molecular Sieve Battery. The air from the cascade cooler passes through the chilling tank, which contains chilled water at a temperature of 6 0 C to 10 0 C. This water is chilled by a Chilling unit. In the chilling tank the moisture entrapped in the air further gets condensed and is separated out as moisture. This moisture is collected in the Moisture Separator and is drained out.   Spares Requirement : For the efficient functioning of the Chilling Unit, some of the important spares are listed below : Freon Compressor Copeland make Piston Rings Piston Connecting Rods Big End Bearing Small End Bush Mechanical Seal Expansion Valve Thermostat High & Low Temperature Tripping Device Suction & Discharge Valve Reeds  

• Power SourceElectric

Positioning in the Plant : Oxygen filling manifold is the final stage where cylinder rack is set for final filling. The pressurized oxygen is controlled by pressure gauges & manifold valves. Primary Function : High Pressure Oxygen Pumped by L.O.Pump passes through Heat Exchangers converts into gaseous form. The gaseous oxygen if filled through oxygen filing manifold in the cylinders ready for marketing. Spares Requirement : Some of its important items spares are listed below:-   Cylinder Valves S.S. Spindles Spindle Keys Manifold Valves Safety valves Pressure Gauges Copper Tubes for Pig Tail Connection Brass Bull Nose & Nuts Spares Requirement : Square Nut and Bull Nose – extruded brass material is used. The material constitution enhances the threading of the nut which gets damaged with continuos workability. SS Spindle – SS 304 material improves the life of the valve as the valve is operated for each filling batch. Manifold valve is made from forged body tested with working pressure of 165 kg/cm 2 and tested pressure of 200 kg/cm 2 . Pressure gauge 6” size are supplied brass as well as SS bordoun for 420kg/cm 2 presssure. Safety valve are made in carbon steel with SS seat and working part. The safety valve supplied is approved by the explosive department .The working presssure are 165 kg/cm 2 – 20 X 25mm size.

• Capacity0-12000 Ltrs
• Product Description:Cryogenic storage tanks for LIN, LOX, LAR, LCO2, LN20, LNG
• Arrangement:Vertical (Horizontal in option)
• Capacity:Upto 40 KL
• Pressure Range:From 18 to 37 bar
• Design Temperature:-196°C
• Design Codes:EN 13458-2 or ASME
• Insulation:Perlite + Vacuum
• Materials Used:Inner vessel in stainless steel,outer vessel in carbon steel
• Outer Finishing:3 layers, finished with painting in white
• Piping Arrangement:All stainless steel pipework and valves
• Instrumentation:Analog pressure and content gauge (transmitters optional)
• The Equipment Include:Pressure build up vaporizer, Safety relief devices for the inner and outer vessel, complete plumbing arrangement for normal operations
• Lifting Lugs:Stainless steel
• Saddles:Included and in stainless steel
• Transport Dimensions:Optimized for easier handling and transport
• In Option:Telemetry system, bursting discs, condensation coil, auxiliary liquid line, among others

• Power SourceElectric

Positioning in the Plant : Oxygen filling manifold is the final stage where cylinder rack is set for final filling. The pressurized oxygen is controlled by pressure gauges & manifold valves. Primary Function : High Pressure Oxygen Pumped by L.O.Pump passes through Heat Exchangers converts into gaseous form. The gaseous oxygen if filled through oxygen filing manifold in the cylinders ready for marketing. Spares Requirement : Some of its important items spares are listed below:-   Cylinder Valves S.S. Spindles Spindle Keys Manifold Valves Safety valves Pressure Gauges Copper Tubes for Pig Tail Connection Brass Bull Nose & Nuts Spares Requirement : Square Nut and Bull Nose – extruded brass material is used. The material constitution enhances the threading of the nut which gets damaged with continuos workability. SS Spindle – SS 304 material improves the life of the valve as the valve is operated for each filling batch. Manifold valve is made from forged body tested with working pressure of 165 kg/cm 2 and tested pressure of 200 kg/cm 2 . Pressure gauge 6” size are supplied brass as well as SS bordoun for 420kg/cm 2 presssure. Safety valve are made in carbon steel with SS seat and working part. The safety valve supplied is approved by the explosive department .The working presssure are 165 kg/cm 2 – 20 X 25mm size.

• Capacity0-12000 Ltrs
• Product Description:Cryogenic storage tanks for LIN, LOX, LAR, LCO2, LN20, LNG
• Arrangement:Vertical (Horizontal in option)
• Capacity:Upto 40 KL
• Pressure Range:From 18 to 37 bar
• Design Temperature:-196°C
• Design Codes:EN 13458-2 or ASME
• Insulation:Perlite + Vacuum
• Materials Used:Inner vessel in stainless steel,outer vessel in carbon steel
• Outer Finishing:3 layers, finished with painting in white
• Piping Arrangement:All stainless steel pipework and valves
• Instrumentation:Analog pressure and content gauge (transmitters optional)
• The Equipment Include:Pressure build up vaporizer, Safety relief devices for the inner and outer vessel, complete plumbing arrangement for normal operations
• Lifting Lugs:Stainless steel
• Saddles:Included and in stainless steel
• Transport Dimensions:Optimized for easier handling and transport
• In Option:Telemetry system, bursting discs, condensation coil, auxiliary liquid line, among others

• Phase3 Phase
• 2HA2TER – 40 cu.mr /hr air speration unit4HA4BIS – 63 cu.mr /hr to 80 cu.mr/hr air speration unit
• 4HA4TER – 100 cu.mr /hr to 130 cu.mr/hr air speration unit4HA4Q – 150 cu.mr /hr to 175 cu.mr/hr air speration unit
• 4HA4P – 200 cu.mr /hr air speration unit4HB4BIS – 250 cu.mr /hr to 600 cu.mr/hr air speration unit
• 10” x 6” x 4.75” x 2.375” X 7IHE4 – 60cu.mr/hr to 80 cu.mr/hr air separation unit12” x 7” x 4.5” x 4” X 7IHE4 – 100 cu.mr/hr air separation unit
• 16” x 10” x 6.5” x 4” X 9HSE4 – 175 cu.mr/hr to 200 cu.mr/hr air separation unitAS4 180 – 100 cu.mr/hr air separation unit
• AS4 225 – 150 cu.mr/hr air separation unitAS4 270 – 175 cu.mr/hr to 200 cu.mr/hr air separation unit

• Automatic GradeManual
• Power1-3kw

• Driven TypeElectric
• Automatic GradeAutomatic
• FeatureGood Quality, High Performance
• Warranty1year