Lamination, Wrapping & Banding Machines #2852339

Description

Case packers are a kind of automatic packaging equipment that provides best option to avoid manual packing system. These kind of machines totally decrease the labor cost by eliminating the requirement of human workers and provides the maximum production rate due to less chances of human error. These case packing machines give the best benefits of providing simultaneous packing of multiple boxes at a time and guarantee the best finishing in the work.

Renuka packaging machines & automations is a trustworthy case packer supplier company in India. Our offered products are suitable for any kind of container with any sizes including PET bottles, glass bottles as well as any other shape of bottles used in packaging industries such as beverages or food industries. With our long history of providing effective solution in this field, we are counted among the reliable case packer manufacturers in India based in Thane

Competitive Advantage

Modular design brings highly flexibility;

Independent motor drive, gripping and crating accurately;

Easy to maintenance, fast to change-over;

Low rate of bottle falling;

Low cost of maintenance.

Brought out items

PLC Siemens Make

VFD Denfoss Make

HMI Siemens Make

Pneumatics Parts :- FESTO / SMC

Sensor :- SICK /P&F Make

Motors :- VARVEL/Bon Vario Make, Italian make

Required Compressor air Supply :- 80 psi (5.5 bar).

Consumption : 3.0 CFM, 18.7 SFM (100 liters/min).

Description

• The Premix Cartons will be loaded manually or can be connected to cartooning machine on the input conveyor.
• At the end of the conveyor, each Premix cartons are separated by the main pusher and pushed to the wrapping station.
• The film will be drawn and cut to the required size.
• The Premix carton will pick up the film when pushed up to the wrapping station.
• The flaps will be folded and sealed by Folder and heaters respectively.
• The Ends will be folded by pair of Folders and sealed with heater body.

Infeed sectionThe products are fed to the infeed conveyor of the machine . As the products collate at pusher area, the line stopper stops the product and the line sensor get actuated. Once the system assures enough accumulation of products, signaled by the product accumulation sensor, the gate valve actuates and holds the upcoming products and clear the infeed gate. After a delay the pusher pushes the collation through the curtain of film to make the sleeve.

Sealing and Film Feeding SectionThe Sleeve Wrapper uses two rolls of single wound. The film unwinding is by motorised with dancing bar arrangement.The sealing system consists of a Special sealing system suitable for P.E.films. Once the product reaches sealing zone, the top hold down plate will come down and holds the product and then the vertical sealing arm will get actuated to seal the film and completes the wrapping operation. Once the seal is made, the sealing arm get retracts. The product is pushed into the infeed conveyor of the Shrink Tunnel by the driven outfeed conveyor.

Shrink TunnelThe shrink tunnel is used to circulate hot air around the pack as it moves on the conveyor. The air from inside of the tunnel is sucked and blown on the heater (finned type). This re-circulated air comes on the pack from all sides, top bottom thereby giving a uniform shrink to the pack. During the first quarter of the tunnel, the film gets hot air only from the bottom and then from all sides. This helps in shrinking PE film well and helps to pull the seal to bottom of unit. Once the unit moves out of the hot chamber, then cool air is thrown on the unit to achieve a tight cling on the unit and it cools the unit.