DeGATEC ENGINEERING SOLUTIONS INDIA PVT LTD

Hadapsar, Pune, Maharashtra

DeGATECH manufactures Carbon Adsorbers for both physical and chemical adsorption of gas-phase pollutants. Adsorption involves the adhesion of pollutant gas molecules to porous solid surfaces that the contaminated air stream passes through.

TYPES OF CARBON ABSORBER

DEG-ACS-PB-H Series (Parallel Bed Carbon Scrubber, Horizontal Flow)

DEG-ACS-PB-V Series (Parallel Bed Carbon Scrubber, Vertical Flow)

FEATURES

- Maximum Capacity to 30, 000 CMH for a single module unit, further it can be increased as per requirement

- Efficiencies upto 99.9%

- Construction available in mild steel, stainless steel, PVC, FRP, and other materials

- Complete instrumentation and electrical controls available

- Corrosion resistant AMCA rated fan on the inlet or outlet side of the adsorber, if required

DeGATECH Plate Colum Scrubber Wet Gas Scrubbers collect particulates, and absorb vapors and gases. High collection efficiencies (99% @10 microns) are achieved with low water consumption and minimum pressure drop. This is the most efficient low energy scrubber available. Capacities upto 200, 000 CMH

TYPES OF PLATE COLUMN WET SCRUBBER

DEG-WSP-V Series (Plate Type Wet Scrubber, Vertical Flow)

FEATURES

- Gives high collection efficiency of solids and gaseous pollutants

- Provides minimum pressure drop

- Fumes are also be absorbed

- Maintenance cost is low

- Emission of minimum product through exhaust

- Ability to handle high temperatur

- 99% collection efficiency for 10 microns or larger.

- Ability to collect both gases and particulate matter

- Multiple stages can be provided.

This is a cross-flow design with scrubbing liquid flowing vertically downwards while the gas passes horizontally through the packing section. A DeGATECH Horizontal Packed Bed Scrubber is used when limited headroom is an issue at a customers facility or when low profile is desired for roof-top applications. Multiple stages can be easily provided in one housing with separate sumps and pumps if required.

TYPES OF HORIZONTAL SCRUBBER

1) DEG-WSPB-H Series (Packed Bed Wet Scrubber, Horizontal Flow)

FEATURES

- Capacities:1000 to 80, 000 CFM with a single unit

- Efficiencies to 99.97%

- Vertical and horizontal configurations

- Counter-flow and cross-flow models

- Cylindrical and rectangular construction designs

- Pre-quench and DeGATECH Multi stages scrubbing options available

- Wide range of packing media including rings and saddles in various materials. Structured packing is also available.

Packed tower scrubbers (also referred to as packed bed or packed column scrubbers) are designed for chemical scrubbing of contaminants from gas streams. Internal packing in the scrubber housing provides a large wetted surface area to induce intimate contact between the contaminated gas and the scrubbing liquid. The contaminant is then absorbed into or reacted with the scrubbing liquid. Recirculation of the scrubbing liquid, which may contain caustic or acid scrubbing agents, is often required to achieve the desired outlet emissions.

TYPES OF PLATE COLUMN WET SCRUBBER

DEG-WSPB-V Series (Packed Bed Wet Scrubber, Vertical Flow)

FEATURES

- Capacities:10 to 80, 000 CFM with a single unit

- Efficiencies to 99.97%

- Vertical and horizontal configurations

- Counter-flow and cross-flow models

- Cylindrical and rectangular construction designs

- Pre-quench and DeGATECH is stages available.

DeGATECH offer a wide range of venturi scrubbers that is widely used in both applications of a particulate collection as well as pollution control equipment. A venturi scrubber is designed to effectively use the energy from the inlet gas stream to atomize the liquid being used to scrub the gas stream. Particle and gas removal occur in the throat section as the inlet gas stream mixes with the fog of tiny liquid droplets. The inlet stream then exits through the diverging section, where it is forced to slow down. Venturis can be used to collect both particulate and gaseous pollutants, but they are more effective in removing particles than gaseous pollutants.

Venturi Cum Packed Bed Scrubber are custom designed to capture sub micron particulate matter, chemical fumes, odors, and other water / chemically soluble fumes and vapors generated in industrial process. All wet scrubber works on the principle of absorption technology, where the pollutants are made in contact with scrubbing liquid. The pollutants gets absorbed by scrubbing liquid either physical or by chemical means. The capturing efficiency of the scrubber can be increased by increasing the time of contact of flue gas with scrubbing liquid.

FEATURES

- Capacities:1000 to 60, 000 CFM with a single unit

- Efficiencies to 99.97% for dust & 99.95% for Gaseous contaminant

- Vertical and horizontal configurations

- Counter-flow and cross-flow models

-Cylindrical and rectangular construction designsPre-quench and DeGATECH Multi stages scrubbing options available