Transducers in Delhi

Melt Pressure Transducers

• Features : Reliable, Quality assured, Fine finish
• Output : 0-10 Vdc
• Temp. Sensor : J Type / With Or Without Both
• Pressure ranges : From 0-35 To 0-2000 Bar / 0-500 To 0-30000 Psi
• Thread : 1/2 - 20 Unf
• Accuracy : +- 0.25% Fso (h); +- 0.5% Fso (m)

Melt Pressure Transducer

• Model : CT6S
• Output : 3.33 Mv/volt
• Compatibility : Pin-to-pin Compatibility With Competitors' Models Using Bendix Style 6 Pin Bayonet Connector
• Calibration : Internal 80% Shunt Calibration
• Application : Ideal For General Purpose Melt Pressure Applications
• Feature : 3.33 Mv/volt Full Scale Output,Accuracy +/- 0.25%, 0.5%, 0.1%,Internal 80% Shunt Calibration,Affordable
• Mounting Thread : 1/2-20 UNF
• Accuracy : +/- 0.25%, 0.5%, 0.1%
• Mounting Stem Length : 6 Inches
• Number Of Flower : Pressure Transducer

Melt Pressure Transducer

• Calibration : Internal 80% Shunt
• Mounting Thread : 1/2-20 UNF
• Material : Stainless Steel
• Application : General Purpose Melt Pressure Applications
• Compatibility : Pin-to-pin With Competitors' Models
• Connector Type : Bendix Style 6 Pin Bayonet
• Mounting Stem Length : 6 Inches
• Accuracy : +/- 0.5%
• Output : 3.33 Mv/volt
• Construction : All Welded Stainless Steel

Stainless Steel Linear Displacement Transducer, Power : 12-30 VDC

• Brand Name : Ametek APT
• Power : 12-30 VDC
• Material : Stainless Steel
• Supply Type : Supplier
• Mechanical Stroke : 1-300 Inch
• Part Number : 953 VMAX

Pressure Transducers, Brand Name : TE CONNECTIVITY USA

• Shape : Round
• Features : Custom Pressure Ranges up to 2000 psi, Analog Outputs of 4-20 mA or VDC ,Optional Lifetime Lightning Protection.
• Color : GREY
• Brand Name : TE CONNECTIVITY USA
• Model Name/Number  : KPSI 27 
• Body Material : SS
• Supply Type : Supplier

Current Transducer, Voltage : 12 V

• Current Consumption : 16 (+ 15) + is mA
• Ambient Storage Temperature : - 40 + 90 deg C
• Model No : LA 125-P
• Mass : 40 gm
• Frequency Bandwidth : DC 100 KHz (- 1 dB)
• Ambient Operating Temperature : - 40 + 85 deg C
• Country of Origin : 12 V
• Conversion Ratio : 1000
• Brand Name : Lem
• Secondary Nominal Current : 125 rms

LV 25-p Voltage Transducer

Voltage Transducer

• Rated Operating Frequency : 45-50 or 60 - 400 Hz
• Storage Temperature : -40 deg C to 70 deg C
• Accuracy Class : 0.2 %
• Brand : Rish
• Supply Voltage : 230V 50Hz or 60 Hz, AC/DC 48V 50Hz or 60 Hz AC/DC
• Ambient Temperature : 23 deg C + 2 deg C
• Model : CON I
• Rated Operating Voltage : 60, 230, 300 V AC/DC
• Features : LED indicating the power on state, Isolation between input and output and Power Supply:
• Availability : Approx. 0.15kg

Transducer

• We have maintained our high standards in the market by delivering only high-quality products and this is done by using quality raw materials obtained from reliable sources. We are tagged as a prominent name for supplying Transducer & Convertor in...

Series 672 Low Pressure Transducer, For Compatible Liquids Gases., Feature : High Quality

• Application : Compatible Liquids And Gases.
• Output : 4-20 MA (2-wire) Or 0-5 VDC (3-wire).
• Feature : High Quality
• Condition : New
• Material : Stainless Steel, Fluoroelastomer (FKM).
• Power : 4-20 MA: 9-35 VDC; 0-5 VDC: 7.5-35 VDC.
• Brand Name : DWYER USA
• Supply Type : Supplier
• Total Carbohydrate : 1yrs
• Country of Origin : 4-20 MA: 9-35 VDC; 0-5 VDC: 7.5-35 VDC.

DWYER USA Current To Pressure Transducer, Feature : Excellent Performance, High Quality

• Feature : Excellent Performance, High Quality
• Power : Loop Powered.
• Condition : New
• Availability : 2.1 Lb (0.94 Kg).
• Number Of Flower : Current To Pressure Transducer
• Supply Type : Supplier
• Application : Clean Dry Air Filtered To 40 Microns.
• Total Carbohydrate : 1yrs

DWYER USA Electro Pneumatic Transducer, Feature : Excellent Performance, High Quality

• Brand Name : DWYER USA
• Country of Origin : 18-28 VAC/VDC
• Total Carbohydrate : 1yrs
• Availability : 1.0 Lb (0.45 Kg).
• Power : 18-28 VAC/VDC
• Supply Type : Supplier
• Condition : New
• Feature : Excellent Performance, High Quality
• Temperature:25 to 150 Degree F (4 to 65 Degree C). : Air Supply:40 psig (276 kPa) maximum.
• Pressure Drop:0.1 psig (0.7 kPa) : Current Consumption:150 mA.

Temperature Measuring Transducer

• Applications : Process Control & Automation, Porcess Cotrol and Automation Systems, Electrical & Electronic Etc.
• Segmants : INDUSTRIAL ELECTRONICS,POWER GENERATION & DISTRIBUTION, INDUSTRIAL PROCESSES,OIL AND GAS Etc.
• The analogue input signal is converted into a configurable frequency signal. Thus analogue signals can be read by the 2-way isolation. Configuration via DIP switches...

Measuring Transducer

• The analogue input signal is converted into a configurable frequency signal. Thus analogue signals can be read by the PLC‘s counter inputs. 2-way isolation, ....

ANGULAR DISPLACEMENT USING CAPACITIVE TRANSDUCER (VPL-TT-CPT)

• Readout : 3.5 digit digital display to indicate the angular displacement in degrees.
• Test Points : Test points are provided at various stages in the circuit to observe waveforms and voltages.
• Supply Type : Manufacturer
• Indicator : Mains ON/OFF
• Number Of Flower : Dielectric. Gang.Controls
• Parameter Measured : Angular Physl.C.al Displacement.
• Transducer : Capacitive.

Blood Pressure Measurement Trainer (VPL-BIO-BP)

• Supply Type : Manufacturer
• Pressure Detection : Thrpugh Stethescope
• Cuff : 140mm (W) x 480mm (L)
• Measurements Method : Oscillometric method
• Storage Temperature/Humidity : -20 to +60°C/10-95%RH
• Inflation : Manual by inflation bulb
• Display : Pressure Gauge Meter
• Operating Temperature/Humidity : 10 – 40°C/30-85%RH
• Deflation : Through pressure release valve
• Accessories : Cuff, Air inflation bulb

Ultrasonic Cleaning Transducer

• Longer Life : Easy to install
• Brand Name : Martin Walter Germany
• Uniform Vibration : Microprocessor controled Ultrasonic
• Digitally controled ultrasonic : Push Pull Ultrasonic Transducer
• Solid rod type transducer : Leak Proof

Ultrasonic Immersible Transducers

• We are known for delivering the orders within the specified time frame owing to our modern transit facilities. We are capable of delivering consistent and qualitative results by carrying out strict quality examinations.   Features and Benefits...

Push Pull Transducer

• Our team members help us completely to deliver exceptional range of products that is in conformance with the standards. We have captured the market with the wide array of products; we make available the same from Delhi(India)....

Proximity Probe Transducers

• Feature : Design for long life cycles and harsh environments and High resistivity to corrosive environments
• The PPT-080 and PPT-110 Proximity Probe Transmitters are used for non-contact measurements of shaft vibration measurements. Each system consists of a probe, extension cable, and a driver. The PPT series proximity probe systems are designed to meet API 670 standards. The voltage...

Linearized Proximity Probe

• Feature : Designed for long life cycles and harsh environments , Active temperature compensation
• The sensor is designed with integrated linearization electronic in order to ensure excellent linearity and active temperature compensation. The built-in oscillator tuned above 750kHz ensures measurement with minimal magnetic run out effect. The PPT-280 can be used either for...

Air Gap Transducer, Feature : Excellent Accuracy, Temperature Compensated

• Feature : Excellent accuracy , Temperature compensated
• The transducer system consists of an AGS-212 sen-sor with integral flexible triaxial cable (~1.5m) termi-nated by a small 5mm coaxial connector. The triaxial cable is protected on its entire length by a flexible polyamide conduit plugged to an adapter module terminated by...

Force Transducer

• MOQ : 1 Piece
• Zero load out of balance signal : +- 1% FSO
• Creep : +- 0.2% FSO after 30 min. at Ln
• Nominal full scale load : 5 to 20 KN
• Model Number : AM-KN2D
• IP Rating : IP65 Protection
• Accuracy : 1%
• Nominal output at FSO : 2mV
• Output tolerance at Ln : +- 5% FSO
• Brand : Gefran Italy