Delhi, India
Our Products
Wavelength Range: 400 - 700 nm [8 Glass Filters] Peak wavelengths: 400, 490, 520, 540, 590, 620, 650, 700 nm Minimum Volume: 1.0 ml Light Source: 6V, 10 W, Tungsten Filament lamp Test Tubes: 10 mm (Inner) Detector: Silicon Photodiode Display: 2 digits seven segment display
| This bath is suitable for Wasserman, Kolmer & Kahn test inactivation, paraffin Embedding & many other application in the Laboratories, Hospital & Industries. Serological Water bath is double walled outer body made of mild steel sheet painted with attractive Epoxy coated & inside chamber made of stainless steel. The gap between the walls is filled with glass wool to minimize the loss of temperature. The serological water bath is provided with a S.S. drain plug to facilitate easy emptying & cleaning of the inner chamber when ever necessary. Bath consists of dome cover & perforated removable shelf. Available in following internal sizes:300 x 250 x 175mm (Suitable for 2 racks)(14 Ltrs)330 x 300 x 175mm (Suitable for 4 racks)(18 Ltrs)455 x 300 x 175mm (Suitable for 6 racks)(25 Ltrs)605 x 300 x 175mm (Suitable for 8 racks)(32 Ltrs) |
This bath is suitable to maintain constant desired temperature for heating flasks in Chemical Laboratories. Bath is double walled inside made of stainless steel & outer body made of mild steel sheet painted with attractive Epoxy coated. The gap between the walls is filled with glass wool to minimize the loss of temperature. The stainless steel nozzles are provided one for inlet and second for over flow of water. The top of the bath has concentric rings. Available in following sizes:a) 325*250*100 mm (6 holes of 3" dia.)b) 325*300*100 mm (9 holes of 3" dia.)c) 425*325*100 mm (12 holes of 3" dia.)Also available in single wall
| Timer Range: 9.9 Hours. Auto shut off and Buzzer. Display: LCD display in Temp. And Timer. Method: As per APHA. Power: 230 Volts, single phase A/c, Glass ware: 15 No. Vessels and 15 No. Air condensers ACCESSORIES 1. Stand for Vessel: 01.2. Stand for Air Condenser: 01.3. Cooling Tray: 01. |
Adding to the already existing range of autoclavable laboratories trays, is the Utility Tray and as the name suggests this Polypropylene Tray can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus. Size 375X350X130mmMaterial: Polypropylene
These Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.Material: PolypropyleneAvailable in following capacities:50 ml, 100ml, 250ml, 500ml, 1000ml, 2000ml
This is a fast release pipetting device for precise pipetting & zip-quick emptying. The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies & can be easily disassembled for through cleaning.Material: Acrylonitrile Butadiene StyreneAvailable in following capacities:2 ml, 10ml, 25ml
This autoclavable Polypropylene Tray has a unique feature i.e. its handle, which proves really helpful in carrying reagents, or laboratory apparatus from one place to another, single handedly. Size 380X240X115mmMaterial: Polypropylene
Simple Cell Pot, as the name suggests, is used for making Simple Cells & Voltmeters etc. Moulded in Polypropylene, this Pot has very good contact clarity and excellent chemical resistance. Being in Polypropylene, this Pot is much durable than the one used conventionally.Material: Polypropylene
Blown in Polypropylene, this Pot is used for making Leclanche Cell. This Pot too has very good contact clarity & excellent chemical resistance.Material: Polypropylene
| This Burette has a transparent acrylic body and a leak proof stopcock fitted with a self lubricating PTEE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute minerals acids & bases except Hydrofloric Acid & Ammonium Hydroxide. The pH range of 1-14 is deal and can be used up to 5% wt/wt of acids or 30% bases. Material: Polymethyl Methacrylate/ TPX Available in following capacities:25ml, 50ml, 100ml |
Most versatile for Biochemical Oxygen Demand determinations. Castor wheel mounted cabinet is double walled with inner chamber of aluminum or S.S. and outer wall of M.S. Sheet duly degreased and pre treated with primers for rust proofing duly painted with attractive stove enamel or powder coated . The gap between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses. Triple walled back of unit is fitted with two air circulation fans for maintaining temperature uniformly throughout the chamber. Full view inner glass/perspex door permits inspection of specimens, without disturbing the chamber temperature. Lock and Key arrangement is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. Refrigeration unit is consists of a sturdy compressor/cooling kit. The front panel is provided with separate indicator lamps for main, heating and incoming voltage. Supplied complete with 3 shelves, cord and plug to work on 220/230V A.C. supply. Temperature from 5 C to 60 C is controlled by SOLID STATE ELECTRONIC DIGITAL TEMPERATURE INDICATOR-CUM-CONTOLLER, with an accuracy of 0.5C. Available in following Inner Chamber sizes:a) 455x610x410 mm (4.0 Cu.ft., 112 Ltrs)b) 505x830x415 mm (6.1 Cu.ft., 171 Ltrs)c) 570x875x550 mm (10 Cu.ft., 280 Ltrs)d) 650x900x550 mm (12 Cu.ft., 336 Ltrs)
These are sturdy double walled units with outer chamber made of M.S. sheet duly enamel painted with inner chamber made up of anodized aluminum or S.S. sheet of SS-304 grade. The gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated shelves to convenient height. Temperature is controlled by hydraulic type capillary thermostat from ambient to 250C 0.5 C An L-shaped prismatic thermometer is fitted to unit for reading the chamber temperature. To work on 220/230 volts A.C.supply. Available in following Inner Chamber sizes(W x D x H) : a) 300x300x300 mm (28 Ltrs.)b) 355x355x355 mm (45 Ltrs.)c) 455x455x455 mm (95 Ltrs.)d) 455x455x605 mm (125 Ltrs.)e) 605x605x605 mm (224 Ltrs.) f) 605x455x910 mm (252 Ltrs.) g) 605x605x910 mm (336 Ltrs.)
These incubators are double walled units with outer chamber made of M.S. sheet duly enamel painted with inner chamber made up of anodized aluminum or S.S. sheet of SS-304 grade. The gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated shelves to convenient height. The door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test temperature. Temperature is controlled by hydraulic type capillary thermostat from ambient to 70 C 0.5 C An L-shaped prismatic thermometer is fitted to unit for reading the chamber temperature. To work on 220/230 volts A.C.supply. Available in following Inner Chamber (W x D x H) sizes:a) 300x300x300 mm (28 Ltrs.)b) 355x355x355 mm (45 Ltrs.)c) 455x455x455 mm (95 Ltrs.)d) 455x455x605 mm (125 Ltrs.)e) 605x605x605 mm (224 Ltrs.)f) 605x455x910 mm (252 Ltrs.)g) 605x605x910 mm (336 Ltrs.)
For determining bulk density or unit weight of aggregates. Calibrated cylindrical measures are made of sheet iron with handles. Consists of 3 measures; one each of 3 litres, 15 litres and 30 litres capacity. Complete with one tamping rod, round, 16 mm dia and 600 mm long, one end rounded.
Construction is same as in Crookes Radiometer Single but having two bulbs with two sets of vane; when exposed to sunlight, the vanes rotate in opposite directions.
