Measurement Gauges & Fittings #6061130

• Suitable For measurement of Diagonal Linearity
• Available for Various Tile size(cm) : 15 x 15, 20 x 20, 25 x 25, 30 x 30, 35 x 35, 40 x 40, 45 x 45, 50 x 50, 60 x 60
• Please specify your required tile size measurement at the time of order
• Key Features
  • These gauges are suitable for the fast determination of Flatness or Diagonal Differences of ceramic tiles, measured across the diagonal dimension.
  • It comprises of a steel bar with two calibrated feet, which can be set at varying distances apart.
  • Also, consists of a spherical bubble and a 60mm diameter dial gauge, marked in 1/100mm increments.
  • Each unit is supplied with a ground calibration plate, in a wooden box

• One single instrument can make all the measurements Rectangularity (Orthogonality), Flatness, Warpage & Straightness of sides as suggested by the standard.
• 06 different digital LVDT Transducers to offer precise and accurate measurement results with very little deviation factor.
• Simple, easy and less time consuming LVDT fixing system.
• Readings from all 06 LVDT transferred to central controlled display screen, where an operator can analyse the generated results in 06 different channels.
• An operator can make easy & effortless comparison between each of the generated readings.
• Tare facility for each LVDT is available in respective controller channel.
• Accuracy : 0.01 mm (1/100 mm)
• Can measure : 100 x 100 to 600 x 600 mm tile sizes
• Supplied complete with locating studs and Allen keys
• Aluminum Ergal hard anodized ground working plate
• Stainless Steel/Mild Steel Supporting structure
• System can also be supplied with dedicated software part for data acquisition and analysis purpose (Available at extra cost - see optional accessories)

Entire setup comprises of two different instruments as per following.

• Tiles surface flatness and warpage measurement apparatus
• Tiles straightness of sides and Tiles rectangularity (Orthogonality) test apparatus

• One single instrument can make all the measurements Rectangularity (Orthogonality), Flatness, Warpage & Straightness of sides as suggested by the standard.
• 06 different digital dial gauges to offer precise and accurate measurement results with very little deviation factor.
• Simple, easy and less time consuming dial gauge fixing system.
• All six readings get displayed on individual Digital Gauge (Comparator) screen.
• An operator can make easy & effortless comparison between each of the generated readings.
• Individual Tare facility is available for each digital gauge.
• Back light facility to easily read and view the display even in sunlight.
• Direct Digital reading in plus or minus factor.
• Accuracy : 0.01 mm (1/100 mm)
• Can measure : 100 x 100 to 600 x 600 mm tile sizes
• Supplied complete with locating studs and Allen keys
• Aluminum Ergal hard anodized ground working plate
• Stainless Steel/Mild Steel Supporting structure
• System can also be supplied with dedicated software part for data acquisition and analysis purpose

Used to determine the Elongation Index of the Aggregate. Aggregate particles are considered elongated when their length is more than 1.8 of the nominal size. It consists of a hard wood base with vertically mounted metal studs as specified in the IS.

Used to determine the flakiness index of the aggregate. The aggregate particles are to be considered flaky, if their thickness is less than 0.6 of their nominal size.

It consists of a frame with sliding panel with accurate slots of different standard width and length, the complete assembly is chrome plated or powder coated.