Write a Review
Our Products
We offer the best product range of Sampling Outfits Augers, Cone Penetrometer and Lateral Pressure Assembly.
Sampling Auger, Screw type with one meter long extension rod, Tee piece handle.
It will consist of metallic cone with half angle of 15' -30 15' and 30.50mm coned length. It will be fixed at the end of a metallic rod with a disc at the top of the rod so as to have a total sliding weight of 148 0.5 gms. The total rod shall pass through two guides. (to ensure vertical movement) fixed to a stand. Suitable provision will be made for clamping the vertical rod at any desired height above the surface of the paste in the trough. A brass trough 50 mm internal diameter and 50 mm depth will be provided as per IS specification resting on M.S.bars.
Optional AccessoriesGround Glass :10mm thick and about 45 cm square or larger rough glass as per IS 2720 (Part V-1985) for mixing soil and water
Spatula :Flexible with blade about 8 cm long and 2 cm wide made from stainless steel material as per IS:2720 (part V-1985)
Evaporating dish :Made from porcelain material having diameter of about 12 to 15 cm with smooth surface as per IS 2720 (part V-1985)
The apparatus consists of a pressure chamber which has a flanged top cap fitted with a 10Kg/Cm2. Pressure gauge and a valve for pumping in air. Water inlet and drain cock are fitted to the chamber. The foot pump supplied easily develops a pressure of 10Kg./Cm2 Complete with connecting pressure hose.
Kunal Parikh (EIE Instruments Pvt. Ltd)
10th Floor, Span Trade Centre, Opp. Kochrab Ashram, Near Paldi bus stand, Paldi, Ahmedabad, Gujarat - 380006, India
Share us via
