Eltec Cables & Instruments

Bhaktinagar, Rajkot, Gujarat

The Eltec Mineral Insulated Thermocouple Cable is designed for manufacturing thermocouple and RTD sensors. It features a durable SS finish, high purity MgO compact insulation material, and a power rating of 600. The sheath material options include SS 316, SS 310, and Inconel 600, while the conductor material is J, ensuring reliable and accurate temperature measurements in various industrial applications.

We are ELTEC, a leading Manufacturer, Exporter, and Supplier of high-quality PTFE Insulated Power Cables. Our cables are designed for various applications, offering single and multicore options with stranded conductor stranding. With a power/voltage rating of 600V/100V, these cables ensure reliable performance. The PTFE material provides excellent insulation properties, making them ideal for use in demanding environments. Our cables have a standard maximum bending radius, ensuring flexibility and ease of installation. Trust ELTEC for top-notch PTFE Insulated Power Cables that meet your power transmission needs.

Features

• Temperature Input: RTD (Pt 100), Resolution: 0.1°C
• Optional Pressure Input: 4-20mA, 0-10V Resolution 1, 0.1, 0.01, 0.001°C (Selectable)
• F0 calculation at the end of Sterilization
• Low Water Level Input available
• Excitation voltage available: 5V, 12V, 24V (Jumper Selectable)
• Programmable Input Signal Conditioning (Digital Filter & Zero Offset)
• Drying facility to avoid high outrush of pressure
• Programmable Sterilization Timer with Guaranteed Soak Time
• High Temperature Safety Alarm
• Automatic Cycle Abortion at High Temperature Limit
• Computed Saturated Steam Pressure Display
• Independent Air Purging and Sterilization Set point
• Independent Outputs for Air Outlet Valve & Steam Control
• Front/ Remote Sterilization Cycle Start Command

Features

• Universal Sensor Input
• Programmable control action PID control/ ON-OFF
• Programmable Input Signal Conditioning (Digital Filter & Zero Offset)
• Optional Current Output Available
• Optional Serial Communication Port
• Soft Start Time for 4-20 mA
• Overshoot Control Protection
• Single Step Ramp Soak
• Alarm Acknowledge & Inhibit function
• Programmable soak timer
• Four different start modes for soak timer
• Battery Backup for Soak Timer
• Timer Hold Strategy
• Settable soak time delay
• Time Delay for Compressor
• Universal supply voltage ranges from 90 to 270 VAC
• Supply 24VDC Available on Request

 

Features

• Universal Input for Temperature & rH
• PID or On-Off Control for Temperature & rH
• Compressor Control Output with Time Delay
• Programmable Alarms for Temperature & rH
• Water Level Switch Input
• Optional Serial Communication Port
• Universal supply voltage from 90 to 270 VAC
• Supply 24 VDC Available on Request

 

Features

• 4 Digit Single Row Display
• Selectable sensor input (T/C : J, K, R, S & RTD) from keyboard
• Programmable Lower & Upper set point limits
• Programmable control action ON-OFF/PID control
• Programmable hysteresis in ON-OFF mode/li>
• Programmable time delay to activate output in ON-OFF mode
• Selectable heat/cool logic in ON-OFF control mode
• User selectable Relay Or SSR Drive Output
• Program lock function (To prevent unauthorized tampering)
• Universal supply voltage ranges from 90 To 270 VAC
• Available in 5 Standard DIN sizes Specification

Features

• RTD Input for both Cascade and Cabinet System
• Independent On-Off Control Loops for Cascade and Cabinet
• Configurable Set point for triggering Cabinet Compressor
• Programmable Time Delay for both the Compressors
• Programmable Alarms (Low/ High/ Band/ Deviation)
• Relay Output for Cascade, Cabinet & Alarm
• Optional Serial Communication Port (RS-485, Half Duplex)
• DIN Standard Dimensions (mm): 96(H) X 96(W) X 65(D)

We offer high-quality PTFE Insulated Shielded Thermocouple Wire by Eltec, designed for manufacturing thermocouple sensors and as extension wire for control units. Available in sizes ranging from 12 AWG to 24 AWG in solid and multi-strand configurations. This wire features PTFE insulation, Thermocouple Original conductor type, and is suitable for Thermocouple Type J with a temperature range of -60C to 260C. It meets accuracy standards as per ASTM E 230, ANSI MC 96.1, and IEC 60584-2, with a Limit of Error of Class 1 IEC 60584-2. Compliant with ASTM E 230, ANSI MC 96.1, this wire is ideal for manufacturers, exporters, and suppliers.

Features

• 8 / 16 Channel Scanner available
• Various thermocouple & RTD, 4 – 20 mA, 0 – 10 VDC input factory settable.
• 2 Common relay output with grouping facility.
• Scan time: 1 to 59 sec. Programmable by user.
• RS 232 / 485 Serial Prot Communication.

 

Features

• Low cost, Effective, Easy to use Keyboard based Digital timer
• 4-Digits, Dual Row Display [Upper 3-Digit: Run time & Lower 3-Digit: Set time]
• Programmable ON Delay/Interval/Cyclic/Forward-Reverse mode [with Hold time]
• Programmable total time in Forward-Reverse mode
• Programmable Front Reset
• Programmable Output 2 functions : Auxiliary contact/End of cycle/Instant contact
• Multiple Time Range: From 0.01 Sec. to 999 Hrs.
• Time Setting via keyboard
• Configuration at power on (To prevent unauthorized tampering)
• Available in 5 Standard DIN sizes
• Programmable timer start modes to suit various applications
• Programmable No. of cycle in Cyclic mode
• Programmable Up/Down counting
• Programmable Auto Reset/Latch Output
• Programmable Memory Backup
• High Accuracy: 0.05% of Full scale (Repeat Accuracy: 0.01%)
• Time base selection via keyboard
• Independent time base for both cycles in Cyclic mode
• Universal supply voltage ranges from 90 To 270 VAC

 

The Eltec Metal Over Braided RTD Cable is designed for manufacturing RTD sensors or as an extension wire for RTD sensors. With a temperature range of -50 to 250°C, this 6-core cable features PTFE insulation, copper conductors, and PTFE/FEP/PFA insulation and sheath materials for reliable performance in various industrial applications.

Applications

• Manufacturing of RTD Sensors
• Furnaces & Ovens
• Plastic Processing Equipments
• Aerospace & Cryogenics
• Sensor Circuits
• Various Processing Industries

 

Features

• Continuous use up to 260 °C
• Single exposure up to 350 °C
• Good Thermal Durability & Strength
• Flame Retardant
• Superior Abrasion Resistance
• Better flexibility

 

We are a leading Manufacturer, Exporter, and Supplier of Coated PTFE Wire, featuring high-quality Insulation made of PTFE (Poly Tetra Fluro Ethylene). Our wires are designed to meet international standards such as US Military MIL W 16878D and Indian Defense Specifications JSS 51034. With a range of voltage options from 250V to 1000V, single core configuration, and sizes ranging from 32AWG to 2AWG, our wires offer reliable performance. The conductors are available in Silver Plated Copper, Nickel Plated Copper, or BARE COPPER. Trust our Coated PTFE Wire for your electrical needs.

Features

\n

\n
• Universal Sensor Input
\n
• Programmable Analog Range (-1999 to 9999)
\n
• Programmable Input Signal Conditioning (Digital Filter & Zero Offset)
\n
• Excitation Voltage : 5 VDC / 10 VDC / 12 VDC / 24 VDC
\n
• Program lock function (To prevent unauthorized tampering)
\n
• User Calibration Available for Analog Inputs
\n
• Universal supply voltage ranges from 90 to 270 VAC
\n
• Supply 24 VDC Available on Request
\n

 

The pHep® revolutionized the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement.HI 98107 is used by millions of people around the world to monitor pH in laboratories and industrial applications as well as in agriculture, fish farming, food manufacturing and quality control, swimming pools and the printing industry.

 

With a renewable cloth junction, the pHep® has an extended life over typical pH testers. A normal junction clogs with use over time and a typical tester would normally have to be thrown away once the junction is too contaminated. HI 98107’s junction is 2 cm long and when dirty, can be pulled out to expose a fresh section to effectively renew the pHep’s life.

 

Calibration is performed manually at 1 or 2 points with a trimmer located on the side of the tester. With a battery life of 700 hours of continuous use, the pHep® will provide years of testing before the batteries need to be replaced.

Features

• Low cost, Effective, Easy to use Keyboard based Digital Counter
• 4-Digits, Single Row Display
• Programmable Input Count Speed
• Programmable Up/Down counting
• Programmable Front Reset
• Programmable Scale factor 0.001 to 9999
• Programmable Auto Reset/Latch output/T.P.R modes
• Programmable Output 2 as Auxiliary contact or Batch control output
• Count Setting via Keyboard
• Available 12 VDC Sensor Supply ( Short circuit protected )
• Memory retention up to 10 years
• Configuration at power on (To prevent unauthorized tampering)
• Universal supply voltage ranges from 90 To 270 VAC
• Available in 5 Standard DIN sizes

Eltec PTFE Insulated Multicore Shielded Cable is a high-quality cable suitable for various applications. Featuring stranded bare copper/silver/nickel plated copper wire conductors, it offers excellent conductivity. With SS/bare copper/silver copper wire metal braided shielding, it ensures optimal signal integrity. Operating at temperatures from -60 to 260°C and voltages of 250V/600V/1000V, this cable is reliable and durable. Packaged in coil/spool for convenience.

Application

\n

\n
• Utilities Industrial Plants
\n
• Construction of New plants
\n
• Petrochemicals Oil Refineries
\n
• Testing Rig Set Up
\n
• Thermocouple Circuits
\n

\n

 

\n

Features

\n

\n
• Flame Retardant
\n
• Moisture, Chemical Solvent Resistant
\n
• Excellent Die Electric Strength
\n
• 100% shield contact for noise reduction
\n

Application

• Manufacturing of Temperature Sensors
• Furnaces & Ovens
• Plastic Processing Equipments
• Heat Treatment
• Thermocouple Circuits
• Various Processing Industries

 

Features

• Continuous use up to 260 °C
• Single exposure up to 400 °C
• Inert to most chemical & fluids
• Unaffected by lubricants
• Flame Retardant
• Immune to agene fungus & water absorption
• Resistant to gamma radiation

We offer ELTEC PTFE Insulated Wires & Cables suitable for defense applications, with voltage options of 250V, 600V, and 1000V. The PTFE insulation ensures high temperature resistance from -60 to 260C. Available in lengths of 100m, 500m, and 1000m, with shielding options of SS, SPC, or Tin Copper. These twisted pair cables are made of Silver Plated Copper or Nickel Plated Copper, customizable based on core requirements. As a leading Manufacturer, Exporter, and Supplier, we provide top-quality products tailored to meet client specifications.

Application

• Electric Motors
• Generators, Alternators, Inductors &Transformers
• Industrial Furnaces, Ovens & Thermal Equipments
• Ventilators & Other Medical Equipments
• Processing Ind. Steel, Cement, Glass etc.
• Lightning & Air Conditioning

 

Analog Input Module AI 8U

• 8 Analog Input Channel
• Input Type: Universal DC, mA, RTD, Thermocouple
• Automatic CJC for Thermocouple & LRC for RTD Input
• User settable selectable range for DC V/mV/mA Inputs
• 2 wire Half Duplex, RS 485 Serial Communication Port
• Industry Standard MODBUS RTU Protocol with Programmable ID, Baud Rate & Parity
• Compact Din Rail Mount Enclosure 22.5 (W) x 101 (H) x 119 (D)
• Wide Voltage Supply 18 - 32 VDC (24 V DC Nominal)
• Three Way Isolation eliminates Potential ground loops between Power, Inputs & RS 485 Serial Port
• Programmable soak timer
• Four different start modes for soak timer
• Battery Backup for Soak Timer
• Timer Hold Strategy
• Settable soak time delay
• Time Delay for Compressor
• Universal supply voltage ranges from 90 to 270 VAC
• Supply 24VDC Available on Request

We offer high-quality 3T Silicone Rubber Wires designed for LED lights applications. Made from Silicon Rubber with a rated voltage of 1100V, these wires come in 7*36 SWG size and are available in lengths of 500 Mtrs. or 1000 Mtrs. and more. Constructed with 3T Tinned Copper material, the single-core wires ensure reliable performance. As a leading Manufacturer, Exporter, and Supplier, we provide durable and efficient wires that meet industry standards for your LED lighting needs.

 

The J Type Thermocouple Connector is made of durable glass filled Nylon in a sleek black color. Designed to connect J Type Thermocouples, it can withstand temperatures ranging from -50°C to 300°C. With standard size dimensions and a lightweight build, this connector is ideal for various industrial applications.

Direct impact of piston impact can get rid of rust and material attachment inside the pipes and low SG moisture material and material built up in the tank.

• Highly strengthened aluminum body.
• Low frequency continuous impact model, sudden activation / deactivation.
• Frequency and amplitude of impact can be adjusted as desired.
• Direct impact onto target object to produce the optimum vibration feedback.

This model has its application in vibrating separator, conveyor, automatic component arrangement, electroplating built up, protection material, packing process and process molding.

• Special aluminum alloy, small size, light weight.
• Fine enclosure protection can be applied in high humidity and dusty working conditions.
• Frequency and amplitude of vibration can be adjusted as required.
• Low price and durable.

We offer a Thermocouple Connector Set in glass-filled nylon material, available in different colors. This set includes 2 connectors (male and female) in a box packaging, designed to connect thermocouples for precise temperature measurement. Compatible with standard thermocouple types, these connectors are ideal for manufacturers, exporters, and suppliers in need of reliable temperature sensing solutions. Upgrade your thermocouple system with this high-quality connector set for seamless and accurate data collection.

It is often applied on to pipe & elbow clean and tank filled with humidity or small S.G. material.

• One impact wave for one short.
• Highly strengthened aluminum structure.
• Impact force and timing interval can be set by request.
• Extended magnetic strength to increase piston impact power.