Delhi, India
Our Products
| |||
MANUAL STAMPER FOR SOAPS
The Mechanism is designed and constructed with all moving parts held between to massive moving steel plates and the immense forces apply through Foot Paddle.
This manual stamper is ideal for laboratory use to be positioned on Floor. The Stamper employing two single cavity dies (Upper & Lower) for each slug to be stamped .Upper die is mounted on to a slide with a reciprocating vertical motion and lower die is mounted on a mandrill.
The two dies come together forming the final shape.
DESIGN: Standard design pusher moving to and fro on taper slideway through an
adjustable tie rod. A removable frame having adjustable/fixed blades is placed in front of the pusher to cut the billets of desired size, Stamping Beam travels up and down on two piston rods to facilitate accurate stamping. Machine is totally enclosed with three sides.
We have been able to manufacture an array of triple roll mill. The rolls are internally cooled with water to percolate undesirable heating of the mass during operation. There is continuous water circulation system in all the rollers. The advantages of the three roll mills in the mid and high viscosity range permit the dispersion of a product with a low liquid content, which can shorten the overall processing time considerably. Since liquids do not have to be dispersed, they can be added afterwards.
Synthetic Leather is known by its strength, flexibility, friction resistance and above all physical nature. It is the best use of Baggage, Garments, Footwear, Sports, Furniture, Automobile, Railways, Defance & other industries. The latest invented technology will allow synthetic leather to meet main stream of leather business in future.
The VLT Micro Drive is a general purpose drive that can control AC motors up to 22 kW. Its a small drive with maximum strength and reliability.
RoHS compliant
The VLT Micro Drive is manufactured with respected for the environment , and it complies with the Rohs Directive.
The perfect match for :
|
| Motor Control Centre | VFD Panel | Power Factor Thyristerised | |||
| Power Control Centre | PLC Control Panel | Correction Panel | |||
| DC Drive - Analog & Digital | D.G. Synchronisation | Reactor - Capacitor Panel |
| Features : | |
| Full Wave Controlled | |
| Tacho/Voltage Feedback by Jumper Selection | |
| Phase Reversal Protected | |
| Wide Input Voltage Range from 350V. -440V. | |
| Line Chokes for Filteration | |
| High Speed Fuses | |
| Speed & Tension Mode | |
| Field Weakening System (Optional) | |
Two Roll Mixing Mill Developed for your unique mixing applications, high productivity through advanced design.
Emkay Two Roll Mixing Mill is a highly developed range of equipments for Rubber, Plastic and other Polymers with high productivity and consistently good mixing with minimum energy consumption. Engineered for easy maintenance. Featuring self contained and floor mounted. Eliminating the need for foundation or grounting. It is very easy to install Emkay Two Roll Mixing Mill.
Salient Features
Low, initial cost Clean, safe environment. Less operational cost with high productivity. Superior mixing performance.
We manufacture complete range of Two Roll Mixing Mills from lab size 6" x 15" upto a production Mill of 26" x 84". Refiners, Crackers, Grinders (flutted/grooved rolls) for reclaim rubber industries and crumbing/refining of wastage from footwear industry. We can manufacture special mills as per the requirement and specifications of the customers. Each mill is designed to absorb heaviest specified mixing load with minimum deflection. The standard friction ratio of the mills are 1: 1.25 app. Which can be varied upon customer's requirement. Rolls speeds are based on the rheological characteristics & compound to be processed to assure the best possible quality & productivity. Emkay Mixing Mills are designed to run lower or higher RPM than standard as per specifications given by customers (it is optionally). Variable speed is also supplied (DC drive/ hydraulic drive. Optionally).
Jacketed pan inside contact SS sheet 304 quality non-magenetic 10 SWG on outside M.S. sheet 10 SWG oil circulated heating system with 3 KW electric heater (3nos) totally enclosed with glasswool in between the M.S & M.S. Tank.with thermostate control tempreture guage volt meter, ampere meter and safety wall fitted in electric panner mounted on M.S. fabricated stand, hearing shaft fitted in both sides with hearing blocks and gear box fitted at one side and tilting system complete inside chrm finish and outside DUCO paints finsh complete.
An exquisitiely designed machine to fill bottles of different shapes and sizes with any kind of free flowing liquid viz. Drugs, syrups, after shave lotions, milk, beverages, oils, squashes, adhesives, varnishes, spirits, perfumes, chemicals, etc.
The machine is cabinet model made of mild steel and painted with Acrylic base paint. The liquid contact parts and one top of the cabinet is made of stainless steel. The machine is fitted with a vaccum pump driven by a 0.25 and 0.5 H.P. electric motor and an overflow jar with a drain value. This machine is offered in two head and four head varieties to fills bottle ranging from 2" (50mm) to 13" (325mm) height. The nozzle size ranges from 5mm to 12.5 mm.
A most versatile which makes hand labelling clean and neat. Designed to apply an even coat of adhesive on labels stacked infront of the roller stand and hand fed for gumming. The machine can take up lables of any shape but, the size of the lable is limited to the size of the roller. Machine offered in three sizes viz.5" or 9" roller and 12" driven by an electric motor of 1/6 H.P. and H.P. respectively.
We are professionally managed company engaged in manufacturer of shrink tubes. It is manufactured with its precision engineers team & highly sophisticated plant & machinery having closed accuracy of process parameters which meets Global standard.
Advantages
|
||||||||||||||||||||||||||||||
This machine is very simple and efficient in one complete unit with stainless steel Pan of size 90 cm.dia.The machine is worked by oil immersed reduction gear. Blower is operated independently with motor and starter and air is thermostatically controlled to give air from room temperature to 90oC. Entire unit is of sound construction, well painted and good deisign. The complete unit is exctly similar to German Water Brucks make.
Emkay designed, double arm kneader mixer is most suitable for preparing solids, pastes, high viscos substance, with special version for heating and cooling system, pressure and vacuum operations with mechanical or hydraulic tilting arrangements.
|
Emkay stainless steel cylindrical tanks
This unit is made out of stainless steel sheets (304 Quality) with weldings done by Argon Arc process. The tanks are polished and buffed from inside and outside to give mirror finish and are supplied complete with lid l outlet valve with nose nipple M.S stand with castor wheels etc.
his machine is suitable for shifting the granules and the powder. The machine is provided with a stainless steel screen of 20" dia. The unit is friven by 1, 5, H.P. vertical motor. The screen frame and discharge chute etc. are made out stainless steel . The unit does not require any foundation and is provided with heavy castor whaels for movability .The unit is supplied complete with one s.s sieve of any mash (to be specified while ordering). Extra price for S.S. sieve of any mesh.
Applications
Chemicals, Pharmaceuticals, dyestuff and pigments, ceramics, food products detergents, cosmetics, pesticides adn fertilizers, paper pulp, resins, paints, polyerter chips, minerals, rubber compounds, slurries, metal, powers.
| Model | CMS-20 | CMS-30 |
| Motor | 1.5 HP/1440 RPM/415 V | 2 HP/1440 RPM/415 V |
| Energy Consumption | 1.2 Kw | 1.5 Kw |
| Charging Ht. | 1190 mm | 1190 mm |
| Discharging Ht. | 750 mm | 750 mm |
| Foundation | Not required | Not required |
| Overall dimensions | 900 X 900 X 1200 mm | 900 X 900 X 1200 mm |
| Net Wt. | 300 Kgs. | 320 Kgs. |
| Gross Wt. | 420 Kgs. | 450 Kgs. |
| Capacity/Hour | 20-100 Kgs. | 30-300 Kgs. |
MFI AUTOMATIC JAM/JAR FILLING M/c with all contract parts of SS-304, single head filling system wtih filling range of 100-1000 gms/single stroke, 50 kg. capacity feeder fully jacketed, provided with thermostatically controlled heaters, unit complete with ISI MARK 3 HP/3 PHASE STANDARD MOTOR, starter, suitable production gear box, 7ft. length SS-chain conveyor, complete with jar/can guides, no-bottle-no-fill device, etc.
Emkay ROTARY BOTTLE WASHING M/c (Special model syring type with ISI MARK 1HP /3 PHASE STANDARD MOTOR, starter, a set of 24 rinsers, mounted on m.s. stand, machine all covered with SS-304 sheet, giving an output of 36 bottles per minute.
Emkay HIGH SPEED DISSOLVER & STIRRER M/c with all contact parts of SS-304, mechanical height adjustment system, suitable ISI MARK STANDARD MOTOR, starter, heavy m.s. base & pipe stand, with pulley operated speed variation system, etc. ( Available in 500 & 1000 Lt. batch capacity models.
Options of Mild Steel of Stainless Steel Made to order as per the requirements & specifications provided by the client for any size in width, length & load capacity. Transmission Tables & Over Head Conveyors of any size, shape and requirement on order.
Emkay BOTTLE DRYING OVEN with 8-M.S. crates, ISI MARK 1 HP/3 PHASE STANDARD MOTOR, starter, uniform heat distribution fan tubular heaters, 16 swg double wall mos. body with heat resistent aluminium painted inner chamber, Available in Single/Double Door Models.
1. Emkay Reactors are guaranteed for 12 months from the date of commissioning and 18 months from the date of supply whichever is earlier Emkay Engineers provide two free visits to check operation & maintenance of reactors.
2. Emkay Reactors are multipurpose range of reactors filled with Ancher impeller or Turbine blades to suit requirements of Paints, food, Pharmaceuticals, Paper, Distillery units etc.
3. Above technical data is a guide to the users of Reactors. Detailed design & engineering of the reactors must be rechecked by the manufacturer.
With 1/2 H.P. TEFC type standared make A . C . electric motor provided with rotating head set to ensure perfect and leak proof sealing, suitable hear box drive for wide range of variety and sizes of container, having capacity of cap sizes between 18mm
to 70 mm. Adap table for bottle or cans of mamimum 2" to 12" in height and 4" in diameter mounted on heavy duty C.I. stand finished with DUCO paints.
MFI AUTOMATIC TUBE FILLING, CLOSING, CRIMPLING, BATCH NUMBERING
M/c with all contact parts SS-304 suitable for filling 10mm to 38mm dia and 40mm to 200mm length tubes, with one 50 kg. capacity SS-304 hopper, rotarty movement filling station, 20-cup set, arrangement for tube size height fixation, screw type quantity adjustment device, complete with ISI MARK 2HP/3 PHASE STANDARD MOTOR, reduction gear box, having on line arrangement for tube closing, crimping and batch numbering of tubes.
This 3 cu. ft. machine is designed for operation under vaccum and internal pressure to 90 psig. The unit is constructed in stainless steel and is provided with a 125 psi jacket which is insulated and sheathed. A2" sampling port is mounted thorough the cone wall near the bottom and a manually operated valve is mounted on the bottom for complete discharge of blended materials
Establishment in 1842, in Rochester, New York, USA, CHARLES ROSS & SON CO. is today arguably the leading manufacture of Mixing, Blending , Dispersion Equipment's in North America. The BECTOCHEM ROSS Alliance between two highly vibrant organisations, hearlds a new era in the launch of such equipment as the Vertical Blenders, offering modern day technology for these equipment's at your doorsteps.
The Vertical Blender is a Versatile Blender / Mixer used in a wide range of applications. Its unique triblending action achieves the shortest possible mixing times. The mixing Screw moves material upwards and in spiral motion. The upwardmotion is combined with a secondary interna; movement along the periphery. The typical conical shape of the Vessel helps in cascading material from top to bottom.
Ross Vertical Blenders are available in sizes from a popular 35 lts lab unit to 15000 lts production models. Vaccum and Non-Vaccum application with heating and cooling jackets are available along with Dry/Distilling systems based on user specifications and suitable for Adhesive, chemical, Coatings, Cosmetic, Food, Pharmaceutical and Plastic Industries.
Ross Blenders have the unique advantage of:
With available 1 H.P. to 100 H.P. 3 phase 1440 R.P.M-50 Cycles TEFC Type electric motor-main shaft is rotating on heavy duty bearing housing with detachable device for easy clearing head lifted & lowering arrangements by worm gear-box three speed with step pulley all contact parts of 304 non-magnetic stainless steel mounted on M.S. heavy duty stand totally enclosed suitable for 500 ltrs gross capacity batch complete in all respect. gross capacity batch complete in all respect. capacity of available 50 Ltrs. to 50, 000 Ltrs.
Low cost creates greater profit. With the superior nature of PVC synthetic leather and the morden technology, the Semi PU synthetic leather was developed. Such a development has upgraded the utility and competitiveness of PVC synthetic leather to be widely used in making leather shoes, leather belt, hand bag, sofa and so forth.
We are serving customers with sincerity. With automatic coating equipments and high speed surface treatment also through embossing and buffing system, we will be with you in the development of your business.
Emkay BOTTLE WASHING M/c with two SS-304 brushing heeds, ISI MARK 1/2 HP SINGLE PHASE STANDARD MOTOR, starter, suitable covering, etc., having two GI/SS-304 tanks (22x22x18'), 12-Jet ss-rinser and m.s.angle frame stand, etc. (Also available : Floor Model without tanks and stand).
Emkay INDUSTRIAL MOTORISED STIRRER
M/c with suitable ISI MARK STANDARD MOTOR, starter, all contact parts of SS -304 mounted on m.s. stand with heavy duty castor wheels, portable unit, height adjustment ( Available in 200/400/600 Litre batch capacity models).
