Write a Review
Our Products
We offer the best product range of PTFE Coated Fasteners.
Introduction
PTFE coated Fastenersreduces the friction during use and reuse, it has brilliant anti- corrosive properties and increases the usage life of Fasteners.PTFE coated fastenersprovides exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal.Extensive testing and field use have proven that the future of coated fasteners lies with Fluoropolymer coatings. Previously hot dip, galvanized, cadium or zinc plated fasteners were considered the standard. But these coatings could not stand up to the corrosive atmospheres prevalent in many industries. The most widely used application is on B7 studs with 2H nuts. Dramatic improvements in efficiency, life expectancy and corrosion resistance are claimed to be imparted to Nut and Bolt connectors by the application of a low frictionPTFE coating. PTFE coated connectors have out-performed all others in aggressive any noticeable effect. All the material used for Manufacturing is tested for chemical & mechanical properties. The Results are confirmed to meet original material requirement before processing.
Application
PTFE Coated Fastenershave a well established reputation of doing brilliantly in the corrosive atmospheres prevalent in offshore oil and gas, offshore rigs & platforms, shipping, chemical, pharmaceutical, deep sea drilling, shipping, and marine, and power, and nuclear, electronic petrochemical, fluid.
Why use PTFE Coating
PTFE is non-stick, non-toxic self-lubricating and non-wetting, . It has brilliant anti-corrosive properties, superior heat resistant and has cryogenic constancy. All these properties ofPTFE Coatingcreates a long term advantage for a PTFE user.
| Technical Specifications:Use Temperatures | Working temp. range up to + 260C |
| Corrosion Resistance | Salt Spray (ASTM B117) up to 3, 000 hrs (Nuts not frozen) |
| Pencil Hardness | 5H 6H (ASTM D3363-92A) |
| Kinetic Friction Coefficient | 0.06 0.08 |
| Thickness | Nominal 0.001 (1 mil) |
| Impact | 160 in lb (ASTM D2794-93) |
| Adhesion | 5B (ASTM D3359-95) |
| Elongation | 35%-50% |
| Tensile Strength | 4, 000 psi |
| Operating Pressure | Up to 100, 000 psi |
FAV (FAV)
33-33A Sant Savta Marg, No.3 Ground Floor, Opp. Nariel Wadi, Mazgoan, Mazgaon, Mumbai, Maharashtra - 400010, India
Share us via
