FAV

Mazgaon, Mumbai, Maharashtra

Thegauge valvecomes in many configurations, ranging from single isolate valves with a bleed port, to block and bleed valves with varying end configurations. Our gauge valves, as standard, are rated to 413bar (6, 000psi), but can be rated at 689bar (10, 000psi) and are available in a range of different materials.

Constructed from 316 stainless steel, carbon steel or alloy 400, each single piece manifold is compact and features locking plates, mounting holes and upstream or downstream ports. Thoroughly tested to withstand up to 1200 F, instrument manifolds perform in many of the most demanding environments

Two Valve ManifoldsGauge Bleed Needle ValvesGauge Vent ValvesGauge Multiport Valves

FAVgauge valveis designed for leak free closure, regulation and management of fluids in process systems. With a wide variety of port sizes, end connections, style, temperature and pressure tolerance FAVgauge valveare critical for instrumentation, fluid and process control system.

FAVgauge valveare designed for stringent application in Oil & Gas, Chemical, Petrochemical etc. industries. Thesegauge valvecan be used for throttling and straight isolation in process or flow control applications. These metal seated valves are machined from square bar stock and are available in sizes 1/8 to 2 in various connections. 10000 psi valves are rated upto 1 pipe size.

Rising stem& bar stock body design. Metal-to-Metal seating achieves buddle-tight shut-off, longer stem/seal life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistancegauge valveavailable in 316 Stainless Steel, Monel, Duplex & other exoticmaterial.

gauge valvein BSPP, BSPT, ISO, Socket & Butt Weld etc. connections available on request.

Temperature range 100C to 230C (400C Optional )

gauge valveare designed for Pressure upto 20, 000 psi

Spindle is thread rolled and burnished for smooth operation and long life.

Allgauge valveare 100% factory tested with

Dust and thread caps are provided as standard forNeedle valve

1) Compact design

2) Available in variety of material

3) Low operating Torques

4) Dust Cap provided

5) Variety of end connections includes Male / Female NPT, BSPT, BSPP

6) Every valve is factory tested

7) High Pressure Rating Available till 15000 psi

FAVHigh Pressure Valveis designed for leak free closure, regulation and management of fluids in process systems under High Pressure environment of 10000 psi . With a wide variety of port sizes, end connections, style, temperature and pressure tolerance FAV High Pressure Valves are critical for instrumentation, fluid and process control system.

FAVHigh Pressure Valvesfor pressure rating Upto 15000 psi.

High Pressure ValvesRange Includes

1) Needle Valves, 15000 psi

2) Ball Valves, 15000 psi

3) Manifold Valves, 15000 psi

4) Check Valves, 15000 psi

FAVHigh Pressure Valvesare designed for stringent application in Oil & Gas, Chemical, Petrochemical etc. industries. These can be used for throttling and straight isolation in process or flow control applications.

Available in 316 Stainless Steel, Monel, Duplex & other exoticmaterial.

BSPP, BSPT, ISO, Socket & Butt Weld etc. connections available on request.

Temperature range 100C to 230C (400C Optional )

High Pressure Valvesare designed for Pressure upto 15, 000 psi

Spindle is thread rolled and burnished for smooth operation and long life.

All valves are 100% factory tested with

Dust and thread caps are provided as standard.

End connection options include male / female NPT, Tube OD, and ISO threads from 1/8 to 1. Available in stainless steel, carbon steel, brass, and alloy 400. With pressure rating to 15, 000 psi and temperatures up to 1, 200F,

Features

1) Compact design

2) Available in variety of material

3) Low operating Torques

4) Dust Cap provided

5) Variety of end connections includes Male / Female NPT, BSPT, BSPP

6) Every valve is factory tested

7) High Pressure Rating Available till 15000 psi

FAV is one of the reputedManifold Valvesmanufacturer. We make a wide array of configurations are available such as2 WayManifold Valves, 3 Way Manifold Valvesand5 Way Manifold Valves .These Manifold Valves are used in pressure gauges, system impulse lines , differential pressure , Flow Recorder and switches.

We are keeping most of Standard Manifold Valves in SS 316 in Stock.

Basic Variants of Manifold Valve include. Although a same time

2 Way Manifold Valve, R Type, Remote Mounting

2 Way Manifold Valve, T Type, Direct Mounting, One Side Flange

2 Way Manifold Valve, H Type, Direct Mounting, Both Side Flange

3 Way Manifold Valve, R Type, Remote Mounting

3 Way Manifold Valve, T Type, Direct Mounting, One Side Flange

3 Way Manifold Valve, H Type, Direct Mounting, Both Side Flange

3 Way Manifold Valve, Coplanar, Direct Mounting

5 Way Manifold Valve, R Type, Remote Mounting

5 Way Manifold Valve, T Type, Direct Mounting, One Side Flange

5 Way Manifold Valve, H Type, Direct Mounting, Both Side Flange

5 Way Manifold Valve, Coplanar, Direct Mounting

The functions ofManifold Valvesinclude pressure isolation, process equalizing, draining and venting and custody transfer depending on the type

Advantages of FAV Instrumentation Manifold Valve ?

1.Bar stock construction2.Bonnet-to-body-seat, metal-to-metal seal eliminates the need for O-ring seals.3.Shroud with colour identification4.Handle: T-bar metal (standard) or circular plastic optional.5.Double bonnet or single bonnet (optional)

FAV InstrumentNeedle Valveis designed for leak free closure, regulation and management of fluids in process systems. With a wide variety of port sizes, end connections, style, temperature and pressure tolerance FAVNeedle Valveare critical for instrumentation, fluid and process control system.

FAVNeedle valvesare designed for stringent application in Oil & Gas, Chemical, Petrochemical etc. industries. These can be used for throttling and straight isolation in process or flow control applications. These metal seated valves are machined from square bar stock and are available in sizes 1/8 to 2 in various connections. 10000 psi valves are rated upto 1 pipe size.

Rising stem& bar stock body design. Metal-to-Metal seating achieves buddle-tight shut-off, longer stem/seal life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance

Available in 316 Stainless Steel, Monel, Duplex & other exoticmaterial.

BSPP, BSPT, ISO, Socket & Butt Weld etc. connections available on request.

Temperature range 100C to 230C (400C Optional )

Needle Valvesare designed for Pressure upto 20, 000 psi

Spindle is thread rolled and burnished for smooth operation and long life.

All valves are 100% factory tested with

Dust and thread caps are provided as standard.

A wide array of configurations are available such as FemaleNeedle Valves, MaleNeedle Valves, Female to MaleNeedle Valvesand Tube EndNeedle ValvesWe also manufacture customizedNeedle Valvesin various styles , shapes and sizes.

End connection options include male / female NPT, Tube OD, and ISO threads from 1/8 to 1. Available in stainless steel, carbon steel, brass, and alloy 400. With pressure rating to 10, 000 psi and temperatures up to 1, 200F, FAV needle valve meets your needs.

1) Compact design

2) Available in variety of material

3) Low operating Torques

4) Dust Cap provided

5) Variety of end connections includes Male / Female NPT, BSPT, BSPP

6) Every valve is factory tested

7) High Pressure Rating Available till 15000 psi

Pressure Relief Valve is also known as Safety Valve.

Please send us the following information on sales@fav.net.in.We will custom make it for you depending on the requirement.

1) Size

2) Threading

3) Crack Pressure

4) Material of Construction

FAVPressure Relief Valvesoffer performance, reliability and flexibility of use in one easy to maintain, reliable product design. Our InstrumentSafety Relief Valveare available in a variety ofmaterials and end connections .They are highly durable and provide effective performance without any leakage.Safety Relief Valve has come with a wide variety of port sizes, end connections, style, and temperature and pressure tolerance.

We give options ofPre-Calibrated Design or RangeSetting

InPre-Calibrated Design theSafety Valvesare calibrated as per your required set pressure . Even on continuous usage ourSafety Valvesopens up at the set pressure . Our high tensile spring specially fabricated ensures this.

In Range Setting option we give you a lower limit and upper limit of Pressure . You can manually set at required range using the screw at the top.

There are a number of reasons why the pressure in a vessel or system can exceed a predetermined limit. The most common are:

Blocked discharge

Exposure to external fire, often referred to as Fire Case

Thermal expansion

Chemical reaction

Heat exchanger tube rupture

Cooling system failure