Valve Type Double Spout Auto Packing Machine is engineered under the firm direction of experienced quality controllers. These are straightened with pneumatic type feeding, pneumatic type bag clamp and many other allied parts to ensure effective usage. These are admired for its consistent performance and high efficiency. These devices are extensively recommended by clients owing to its longer service life and effective usage.
Specifications:
- Pneumatic Type feeding
- Automatic Overfill compensation
- Adjustable coarse and fine feed rate and quality
- Micro computer controlled
- Pneumatic type bag Clamp
- Maximum output 400 bags per hour
- Filling capacity 10/50 KG (rated for 25 and 50 kg bags only)
- For Smaller Bags Output Will Reduce
Grain Size Composition:
Max size of in-feed material graduated send sizes from 5mm, 3mm, 2mm. Minimum bag mouth opening size to be 65mm.
- Model: Model PF02E
- Packing Capacity: 400 bags per hour
Machine will be complete in all respects, factory assembled and ready for installation under feed hopper.
Grain Size Composition:
Max size of in-feed material graduated send sizes from 5mm, 3mm, 2mm. Minimum bag mouth opening size to be 65mm.
- Filling assembly mounted on structure
- Electronic weighing system
- Control board
Compressed air requirement is 500 LPM at 7 kg/cm and is to be arranged by customer.
Technical Specification for Stationery Packer:
- Equipment: stationery packer
- Material handled: dry mortars
- Bulk density of material: 0.8 - 1.2 T/m
- Max grain size: 5 mm max (samples will be sent to you 100 gms each)
- Filling capacity/unit bag: 25 kg/50 kg
- Filing range: 10-50 Kgs. Min. Nozzle size for bag will be 65mm
- Output per hour: 400 kgs/hour (only 25 and 50 kgs bags)
- Provided size of bag is uniform & big enough & operator is efficient & trained
- Weighing system: electronic load cell
- Accuracy: After starting the Packer, Electronic Indicator automatically adjust itself within 5 to 7 Bags then accuracy will be 50 kg +/- 250 grams for an average of 20 consecutive weighments, provided bag size is as per ISI & uniform with sufficient perforations & proper valve size.
- Temperature of product: 50 to 60 C
- Power requirement: 440 V A.C. three phase @50 Hz
- Air requirement: 400 lpm at 7 kg/cm (single spout)
Scope Of Supply:Stationery Packer:
- Main Frame Assembly
- Suspension frame with 2 filling spouts
- Filling assembly with casting and belt
- Electronic load cell arrangement
- Electrical panel box
- Pneumatic panel box
- Air cylinders
- FRL, pressure regulators & pressure gauge
- Pneumatically controlled slide gate x 2 Nos, with 3 positions air cylinder
- Adjustable bag rest
- Solenoid valves & fittings (janatics make)
- Bag holders with air cylinder
Major Electrical Components Stationery Packer:
- Electronic microprocessor based control unit
- Electronic microprocessor based control unit
- Push button station
- Load Cell of 110 / 225 kg capacity
- Indicator Lamps
- S.M.P.S. (regulated power supply) for each electric panel
- MCB, electrical contactors, MPCB etc
- Microprocessor paper type
Write a Review
Advani (Frigmaires Engineers)
8 Janta Ind Estate, Opp High Street Phoenix Mills, Lower Parel, Mumbai, Maharashtra - 400013
Share us via
