Write a ReviewWe Futuristic Climate Controls are a leading and distinguished Manufacturer, Exporter, Supplier, Retailer and Retailer of quality Advance Balancing Valve, Air Damper, Boiler and Boiler Parts, Burner Parts and Computer Cables, Adapters & Modules.
The Honeywell DBC2000 is a microprocessor-based integrated burner control for automatically fired gas, oil or combination fuel industrial single burner power burner applications. The DBC2000 system consists of the relay module and wiring subbase. The DBC2000 Standard Model provides the minimum requirements to control an industrial burner system, such as automatic burner sequencing, flame supervision, system status indication, system or selfdiagnostics and troubleshooting. The DBC2000 Enhanced Model includes an integrated Valve Proofing System, as well as well as bus communication. The DBC2000 is programmed to provide a level of safety, functional capability and features beyond the capacity of conventional controls. FEATURES · Employs a plug-in mounting method · Uses a microprocessor to improve performance · The progress of the sequence can be easily determined by status indicator LEDs · All models have a 4-wire firing rate switching circuit to control an air damper or other auxiliary equipment during startup of the burner. · Safe start check before and during pre-purge · Safety shutdown occurs on - malfunction of the burner controller - failure to ignite the pilot burner or main burner - loss of flame during run period - opening of air flow switch during pre-purge, start-up, run and post-purge period - flame signal detection during standby or prepurge period · Remote communication (Enhanced model only) · Valve Proofing System (Enhanced model only) Mains input: Supply voltage 220 to 240Vac -15% +10% 50/60Hz or 110 to 120Vac -15% +10% 50/60Hz Allowable ambient Temperature & Humidity -10 °C; +60°C 90% RH max. at 40°C (non condensing) Approvals CE certification to standard EN298:2003 CE certification to standard EN230:2005 Additional approvals: Lloyds (planned) EN746-2 compliant PED (planned) SIL2 (planned) Apave (planned)
The NDD Series nitrogen dioxide detector uses a superior electrochemical sensor for reliability and accuracy in the most critical applications. The NDD provides a 3-wire sourcing 4-20 mA output as well as an alarm relay with three jumper selectable trip level settings. Measurement Range : 0-10 PPM, Output Signal : 4-20 mA, Adjustable Alarm Relay FEATURES: 4-20 mA Output Superior Electrochemical Sensor Alarm Relay with Selectable Trip Level Easy to Field Calibrate Compact, IP65 (NEMA 4X) Enclosure
The I/P converter with various housing is available for cabinet installation, field installation, rail installation and as slide-in type. The signal conversion is based on standard signals. Current signals 0/4 to 20 mA are converted to pressure signals 0.2 to 1 bar or 3 to 15 psi. General specifications: Small dimensions Variable designs – Control room housing IP 20, for rail and block mounting – Field housing, polyester IP 54 – Field housing, aluminium IP 65 – Field housing, stainless steel IP 65 High immunity to shocks and vibrations with an effect Wide temperature range – -40 °C (optionally -55 °C) to 85 °C Worldwide approvals for Explosion Proof and Intrinsic Safety
Rajesh Garg(Futuristic Climate Controls)
124, Sunrise Mall,Near Swaminarayan Mandir, Judges Bungalow Road, Vastrapur, Ahmedabad, Gujarat - 380015
Share us via 
