Post Buy Requirement
GS
Mumbai, Maharashtra, India
gstGST : 27AAIFG8179Q1ZD Verified Add Review

Our Products

  1. Insulators And Insulation Materials 15 Products available
  2. Cables And Wire Accessories 17 Products available
  3. Busbar System 4 Products available
  4. Plastic Component 3 Products available
  5. PVC, PP & Plastic Products 11 Products available
  6. Tapes 4 Products available
  7. Pipe Caps 9 Products available
  8. Others 20 Products available

Other Products / Services

Heat Shrink Cable

  • Gala Code GMRS-64
  • Cable OD 5 - 10
  • Length 100/200/300
  • Overlap Length ≥25
Heat Shrink Cable Repair Sleeves is manufactured from High Quality Cross-linked polyolefin material. Heat Shrink Cable Repairing Sleeve is an adhesive lined, wraparound heat shrink that can be easily applied without the need for disconnection. It provides superior environmental sealing, rugged mechanical protection and high performance electrical insulation.


Features & Benefits:Provides permanent waterproof barrier & environmental seal.Shrink ratio 3:1.Chemical, copper corrosion and fungus resistance.Shut down of system not required for repair.Hotmelt adhesive provides complete environmental sealing and insulation according to IP 68 (Ingress Protection).High resistance to UV rays, chemicals, corrosion, fungus, etc.Significant protection advantages over insulating tape.Reduces total labour and installation cost.Stocking only a few sizes will fit most repair needs.


Applications: Repair of damaged cable jackets.Retrofit protection of connections.Connectorized cable repair.Used in confined spaces underground and ideal for protections of defrayed cable connectors.Cable conduit transitions.Cable wire rope bundles.
View Complete Details

Screened Seperable Connector Upto 24 KV - 630 A

FEATURES & BENEFITS :-

 

 

  • Provides fully screened and submersible separable connection.
  • Mating with C - type bushings and plugs complying with EN 50180 & EN 50181
  • Compact design
  • 100% factory tested
  • Voltage class: 11kV, 15kV, 24kV

Technical Specification
  • Voltage Class
  • 11kV
  • 24kV
  • Continuous Current
  • 630A
  • 630A
  • Alliance Bushing
  • EN 50180 & 50181 Type C
  • EN 50180 & 50181 Type C
  • AC Withstand Voltage
  • 29kV for 5 min
  • 54kV for 5 min
  • Impulse Withstand Voltage (10 times for each polarity)
  • 95kV
  • 125kV
  • Partial Discharge at 1.73U0
  • ≤ 10pC
  • ≤ 10pC
  • Screen Resistance
  • ≤5000 Ω
  • ≤5000 Ω
  • Cable Cross-section
  • 25-400mm2
  • 25-400mm²
View Complete Details

Medium / Heavy Wall Tubes - Insultube Commercial

  • These tubes are manufactured from high quality cross inked polyolefin material.
  • Optional hot melt adhesive lining for complete environmental protection and insulation.
  • Excellent resistance to weathering, UV rays, chemical and solvents.
  • Maximum cut length available upto 1500 mm.for tube size uppto size 250mm.
  • Custom dimensions, thickness, length & colours available on request.
  • Conforms to IEC 60684-3-247 standard.
  • Meets IP 68 (Ingress Protection)

 

 

 

 

 

 

 

 

 

 

GENERAL PROPERTIES OF PRODUCT :

 

 

Shrink ratio 3:1
Operating temperature ranges from -400C to +1100C
Chemical, copper corrosion and fungus resistance
Dielectric strength of 15KV/mm.
Meets RoHS Compliance
Meets IP 68 (Ingress Protection)
SPECIFICATIONS :
IEC, ASTM, AND MIL-SPEC

TECHNICAL SPECIFICATION

  • Properties
  • Value
  • Standard
  • Physical
  •  
  •  
  • Tensile Strength
  • 12 N/mm2 (MPA)(min.)
  • ASTM D638
  • Ultimate Elongation
  • 350% (Min.)
  • ASTM D638
  • Longitudinal Change
  • -10% (Max.)
  • ASTM D2671
  • Density
  • 1.15 ± 0.2 gm/cm3
  • ASTM D792
  • Hardness
  • 45 ± 10 Shore D
  • ASTM D2240
  • Water Absorption
  • 0.5 % (max.)
  • ASTM D570
  • Thermal
  •  
  •  
  • Accelerated Ageing
  • (120oC for 500 Hrs)
  • ASTM D2671
  • Tensile Strength
  • 11 N/mm2 (Mpa) (min.)
  • ASTM D 638
  • Low temperature Flexibility (-40oC for 4 Hrs.)
  • No Cracking
  • ASTM D2671
  • Heat Shock (250oC for 30 Min.)
  • No Cracking or flowing
  • ESI 09-11
  • Shrink Temperature
  • 125oC
  • IEC 216
  • Continuous Temperature limit
  • -40oC to + 110oC
  • IEC 216
  • Electrical
  •  
  •  
  • Dielectric Strength
  • 12 KV/mm. (Min.)
  • ASTM D149
  • Volume Resistivity
  • 1 x 1014 Ohm.cm(min.)
  • ASTM D257
  • Dielectric Constant
  • 5 (Max.)
  • ASTM D150
View Complete Details

Straight Flexible Insulation Boot:

  • Easy to Install or Remove as often as required.
  • Connection can be energized immediately after installation.
  • Protection from Short Circuit Due to Intervention by Reptiles, Birds, Animals.
View Complete Details

Heat Shrinkable Terminal

Cable terminations are made considerably tamper proof from environmental factors as the entire length between the wire termination point and contact is safely encapsulated with this protective product. None can predict the outbreak of a fire and hence the individual needs to take all the precautions that he can.

Terminations is an electrical conduit which comes in the metal and plastic form acts as a tough yet flexible protective covering for the cables. If it is installed with sufficient sealing fittings then it can thwart the flames or vapors from reaching the live cables. Sensitive circuits are shielded from the interference of electromagnetic waves and other emissions from enclosed power cables.
View Complete Details

Heat Shrinkable Terminations

  • Type Terminations
  • Application Industrial
  • Thickness 1.5-2mm, 2.5-3mm, 3.5-4mm
  • Color Available in Many Colors
  • Voltage 220V
  • Power 9-12kw
  • Feature Crack Free, Durable
  • Outer Material Neoprene Rubber, Silicone Rubber
  • Internal Material Copper

We are recognized in the global as one of a prominent Heat Shrinkable Terminations Manufacturers offering various types of Heat Shrinkable Terminations. Our Heat Shrinkable Terminations are fabricated from quality raw materials which offer it robust structure and high strength. Following stringent quality process, we have developed Heat Shrinkable Terminations that suits various industrial applications.

Certification and performance :
Our Heat Shrinkable Terminations are precisely designed to meet the parameters of national and international cable and cable accessories standards such as CENELEC HD 629.1 S1 (VDE-0278), IEEE-48, IEEE-404, IS:13573 & IEC. Our Heat Shrinkable Terminations offers reliable and consistent performance for longer period of time.

Descriptions :
We have designed our Heat Shrinkable Terminations for 3 cores extruded shielded, dielectric, armored and unarmored 24 KV voltage. Credited to this design, our Heat Shrinkable Terminations perfectly suited to medium voltage power cable power accessories that comprise stress relief measures, electrical performance, environmental seal, etc. The installed terminations easily imitate the performance of cable system electrically as well as mechanically. Besides, it has flexible design that accommodates tolerance cable having both secter and round shaped conductors.


Detail :

  • Highly compatible
  • Repeatable results
  • Resistant to UV rays and adverse weather conditions
  • Accommodate to tolerance
  • Distinct conductor cross section and cable constructions


Click on the given links to view the details :

  • Up to 3.3 KV - PVC / XLPE Cables
  • Up to 12 KV - XLPE / EPR Cables.
  • Up to 24 KV - XLPE / EPR Cables.
  • Up to 36 KV - XLPE / EPR Cables.
  • Single Core up to 36 KV - XLPE / EPK / PVC Cables.
  • Up to 12 KV - PILC Cables.
  • Up to 24 KV - PILC Cables.
  • Up to 36 KV - PILC Cables.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mrs. Linette D (GALA SHRINK FIT)
  • Unit No.404,405,406, Eureka Towers, C - Wing, Mindspace, Malad West, Mumbai, Maharashtra - 400064
  • http://www.galathermo.in
  • Share us via
  • Call 08069247352 Ext. 449