Ludhiana, Punjab, India
Our Products
| Specification | Pillar Drill Machine HPD – 25 |
|---|---|
| Tilting working table | FIXED |
| Drilling capacity | 25 mm |
| Pillar Diameter | 92 mm |
| Spindle nose to table distance | 660 mm |
| Distance from spindle nose to base distance | 1045 mm |
| Distance from spindle center to pillar surface | 250 mm ( MAX ) |
| Table Travel | 480 mm |
| Taper in spindle | MT – 3 |
| Number of speed | 8 Speed |
| Range of Speed (RPM) | 130 to 2600 |
| Table Size (in mm) | 330 x 330 |
| Base size (Machined Area mm) | 365 x 575 |
| Overall Base Size (in mm) | 370 x 580 |
| Spindle Travel | 180 mm |
| Pillar Length | 1410 mm |
| Overall height with pulley guard | 1730 mm |
| V-Belt section | B – 52″ |
| Weight (Approx.) | 225 kg. |
| Motor1440 RPM 3 Phase440 volts | 1 HP |
| Shipping Wooden Case Inner Size LxWxH (in mm) |
850x450x1770 mm |
| Specification | Pillar Drill Machine HPD-40 |
|---|---|
| Tilting working table | FIXED |
| Drilling capacity | 40 mm |
| Pillar Diameter | 135 mm |
| Spindle nose to table distance | 495 mm |
| Distance from spindle nose to base distance | 1000 mm |
| Auto feed speed | (applies to PSL-40A only) 0.04 or 0.08 |
| Distance from spindle center to pillar surface | 380 mm ( MAX ) |
| Table Travel | 500 mm |
| Taper in spindle | MT – 4 |
| Number of speed | 8 Speed |
| Range of Speed (RPM) | 60 to 2000 |
| Table Size (in mm) | 490 x 490 |
| Base size (Machined Area mm) | 820 x 490 |
| Overall Base Size (in mm) | 825 x 495 |
| Spindle Travel | 250 mm |
| Pillar Length | 1475 mm |
| Overall height with pulley guard | 1840 mm |
| V-Belt section | B – 74″ |
| Weight (Approx.) | 500 kg. |
| Motor1440 RPM 3 Phase440 volts | 2 HP |
| Shipping Wooden Case Inner Size LxWxH (in mm) |
1200x540x1880 mm |
| OPTIONAL ACCESSORIES | STANDARD ACCESSORIES | APPLICATIONS |
|---|---|---|
| 1. Electric Motor | 1. AMotor Pulley | 1. Tool Rooms |
| 2. R & F Switch | 2. Tapper Drift | 2. Educational Institutes |
| 3. Drill Chuck * Arbour / Slive | 3. Manual Book | 3. Workshops |
| 4. Key-way Compound Slide | 4. Drill-bit angle gauge | 4. Rolling Mills Etc |
| 5. Small & Medium Scale Industries | ||
| 6. Fabrication Workshops |
| OPTIONAL ACCESSORIES | STANDARD ACCESSORIES | APPLICATIONS |
|---|---|---|
| 1. Electric Motor | 1. Tool Rooms | 1. Tool Rooms |
| 2. R & F Switch | 2. Educational Institutes | 2. Educational Institutes |
| 3. Drill Chuck * Arbour / Slive | 3. Workshops | 3. Workshops |
| 4. Key-way Compound Slide | 4. Rolling Mills Etc | 4. Rolling Mills Etc |
| 5. Small & Medium Scale Industries | 5. Small & Medium Scale Industries | |
| 6. Fabrication Workshops | 6. Fabrication Workshops |
HIPAT Radial Drilling machine are of robust construction and are designed for heavy duty drilling. All cast parts are of fine close grained grey iron, machined to closed tolerance and are subjected to rigid inspection at all stage of assembly to ensure accuracy and trouble free service. Each and every machine is thoroughly checked and tested to grade-1 standard.
Base is generously proportioned and fortified by internal ribs, the base is built to handle heavy jobs, Three T-slots on the base ensure easy handling of the job.
Column is cast as one single piece, ensures, perfect, rigidity. It is ground on the external circumference.
The ARM moves up and down by a screw and rotates with complete ease around the column. For angular drilling, it tilt in Model PRD 25 & 32. The graduation provided on the collar of the arm indicates the degree of the incline to any desired angle up to 90 degree on either side.
| MODEL | HRD-25 | HRD-32 | HRD-38G | HRD-38 |
|---|---|---|---|---|
| Drilling Capacity ( in steel) | 1” | 1.1/4” | 1.1/2” | 1.1/2” |
| Max. Dist. From spindle center to column | 21” | 30” | 30” | 36” |
| Min. Dist. From spindle center to column | 9” | 11” | 11” | 12” |
| Vertical travel of arm | 27” | 33” | 36” | 36” |
| Spindle travel | 5” | 6” | 7” | 7” |
| Range of spindle speeds | 280-940 | 235-730 | 88-2600 | 190-520 |
| Power Required (R.P.M) for simple drive | 1 H.P.(960) | 2 H.P.(960) | 2 H.P.(1440) | 3H.P.(960) |
| Power Required (R.P.M) for Elevating Arm | – | – | ,1 H.P.(1440) | – |
| Spindle Bore | M.T.No-2 | M.T.No-3 | M.T.No-4 | M.T.No-4 |
| Pillar Diameter | 5” | 7” | 6.5” | 8.3/4” |
| Spindle Diameter | 1.5” | 2” | 2.5” | 2.3/4” |
| Work Table | 8”*8”*9” | 9”*9”*8” | 14”*12”*12” | 15”*15”*12” |
| Working Surface of base | 18”*19” | 20”*25” | 32”*24” | 31”*21” |
| Floor Space Required | 24”*37” | 44”*25” | 51”*30” | 54”*27” |
| Approximate Weight | 450 Kgs. | 700 Kgs. | 850 Kgs. | 1600 Kgs. |
| OPTIONAL ACCESSORIES | STANDARD ACCESSORIES | APPLICATIONS |
|---|---|---|
| 1. TILTING TABLE | 1. BOX TABLE | 1. Tool Rooms |
| 2. MACHINE VICE | 2. ELECTRIC MOTOR | 2. Educational Institutes |
| 3. MACHINE LAMP | 3. COOLANT PUMP | 3. Workshops |
| 4. DIGITAL READ OUT | 4. PANNEL BOARD | 4. Rolling Mills Etc |
| 5. ELECTRIC WIRING AND LIMIT SWITCHES | 5. Small & Medium Scale Industries | |
| 6. Fabrication Workshops |
HIPAT Precision Heavy Duty Radial Drilling Machines have a stremlined modern outlook and contain all the characteristics normally expected in a superiior qualillty machine.All the castings are of close-grained, heavy duty alloyed cast iron and amply ribbed to withstand stress without distortion, the shafts are of special quality steel andare having ground finish. all the bearings, shafts and gears of the main assemblies are force lubricated properly. the gears are induction hardened.
The hardened and ground spindle run in a hardened and super-finished barrel, which slides an honed sleeve of the gear-box, the locking of the gear-box to arm and the radial movement is having special design to hold it rigidly during drilling operation.
| MODEL NO | HRD 40A | HRD 40B | HRD 50B | HRD 50C | HRD 65 | HRD 75 |
|---|---|---|---|---|---|---|
| DRILLING CAPACITY IN SOLID MILD STEEL MM | 40 | 40 | 50 | 50 | 65 | 75 |
| DRILLING CAPACITY IN CAST IRON MM | 50 | 50 | 60 | 60 | 75 | 85 |
| DIA OF COLUMN MM | 230 | 255 | 310 | 310 | 355 | 405 |
| DRILLING RADIUS MINIMUM MM | 550 | 375 | 450 | 425 | 650 | 675 |
| DRILLING RADIUS MAXIMUM MM | 1050 | 950 | 1100 | 1325 | 1600 | 1950 |
| MACHINE HEIGHT FROM FLOOR MM | 2420 | 2420 | 2760 | 2760 | 3170 | 3320 |
| DISTANCE FROM SPINDLE NOSE TO TOP OF THE BASE PLATE MINIMUM SPINDLE IN DOWNWARD POSITION MM | 50 | 100 | 100 | 100 | 100 | 100 |
| DISTANCE FROM SPINDLE NOSE TO TOP OF THE BASE PLATE MINIMUM SPINDLE IN UPWARD POSITION MM | 1000 | 1150 | 1300 | 1300 | 1600 | 1750 |
| DRILLING DEPTH MM | 180 | 180 | 225 | 225 | 325 | 325 |
| WORKING SURFACE OF BASE PLATE MM | 885*545 | 975*655 | 1150*655 | 1460*845 | 1735*940 | |
| DIMENSIONS OF BASE MM | 1470*705*180 | |||||
| NO OF SPINDLE SPEEDS & RANGE (RPM, Xsteps) | 45-660*6 Steps | 40-790*9 Steps | ||||
| NO OF SPINDLE FEEDS & RANGE (Per Rev. Xsteps) | 0.095-0.215*3 Steps | 0.080-0.180*3 Steps | 0.10-1.25*6 Steps | |||
| TAPER SPIDLE NOSE SOCKET MT | 4 | 4 | 5 | 5 | 5 | 6 |
| MAIN MOTOR HP | 2 | 2 | 3 | 3 | 5 | 7.5 |
| ELEVATING MOTOR HP | 1 | 1 | 2 | 2 | 3 | 5 |
| TOTAL WEIGHT OF MACHINE(approx)Kg. | 1700 | 2000 | 3000 | 3200 | 4800 | 6500 |
| OPTIONAL ACCESSORIES | STANDARD ACCESSORIES | APPLICATIONS |
|---|---|---|
| 1. TILTING TABLE | 1. BOX TABLE | 1. Tool Rooms |
| 2. MACHINE VICE | 2. ELECTRIC MOTOR | 2. Educational Institutes |
| 3. MACHINE LAMP | 3. COOLANT PUMP | 3. Workshops |
| 4. DIGITAL READ OUT | 4. PANNEL BOARD | 4. Rolling Mills Etc |
| 5. ELECTRIC WIRING AND LIMIT SWITCHES | 5. Small & Medium Scale Industries | |
| 6. Fabrication Workshops |
Standard EquipmentsElectric Motors Complete with Panel Board & Pendant Control for all operations. One Steel Telescopic Cover, One Boring Bar, Working Spindle Support Guide for Vibration Control, Co-ordinate reading arrangement with Scales & Verniers for X. Y.Z.-Axis and Handles. Facing head, 2No. Lubricating Pumps, 5 No. limit Switches & Automatic Rapid Travel, fitted with the Machine. Revolving Centre with 6True Chuck Three Nos. Dial Indicators duly fitted in dust proof housings with attachment & Electric Coolant Pump.
Extra Equipments
Milling Attachment.Taper Boring Attachment.Threading Attachment.2Axis D.R.O.
Technical Specifications
| Model | AMI-1 | AMI-2 | AMI-3 | AMI-4 | AMI-5 |
|---|---|---|---|---|---|
| Alloy Steel Work Spindle Hardened & Ground-Diameter | 65 | 80 | 100 | 110 | 125 |
| MorseTaper Number | 4 | 5 | 6 | 6 | 6 |
| Max. Longitudinal Movements of Working Spindle | 410 | 510 | 510 | 510 | 600 |
| Number of Spindle Speeds | 9 | 9 | 9 | 9 | 9 |
| Range of Spindle Speeds – R.P.M. | 20 to 300 | 15 to 300 | 15 to 300 | 15 to 250 | 15 to 250 |
| Longitudinal Work Spindle Feeds Nos. | 9 | 9 | 9 | 9 | 9 |
| Max. Height of the Spindle Axis from Table Surface | 800 | 925 | 1000 | 1100 | 1200 |
| Min. Height of the Spindle Axis from Table Surface | 20 | 25 | 30 | 30 | 30 |
| Dimensions of the Rotary Table | 840 x 1050 | 900 x 1105 | 1030 x 1375 | 1100 x 1450 | 1220 x 1675 |
| Longitudinal Table Traverse | 1500 | 1625 | 1775 | 1925 | 2050 |
| Long. Table Traverse Feeds (Including one Rapid) | 10 | 10 | 10 | 10 | 10 |
| Transversal Table Travel Feeds (Including one Rapid) | 10 | 10 | 10 | 10 | 10 |
| Vertical Head Stock Travel Feeds Includin one Rapid | 4 | 4 | 4 | 4 | 10 |
| Rotary Table Automatic Feeds (Including one Rapid) | Nil | 10 | 10 | 10 | 10 |
| Max. Cross Movement of the Table | 910 | 1000 | 1100 | 1 300 | 1500 |
| Max. Distance between Stay Bearing & Facing Head | 2150 | 2400 | 2690 | 2800 | 2950 |
| Facing Head Diameter | 450 | 505 | 555 | 600 | 650 |
| Weight Approximate in Kgs. (with Packing & Accessories) | 7500 | 9500 | 11500 | 14500 | 18000 |
| Weight Approximate in Kgs. (without Packings Accessories) | 7000 | 8500 | 9500 | 11000 | 13500 |
| Power Motor (HP) | 3 & 1.5 | 5 & 2 | 7.5 & 2 | 10 & 3 | 12.5 & 5 |
| OPTIONAL ACCESSORIES | STANDARD ACCESSORIES | APPLICATIONS |
|---|---|---|
| 1. Facing Head | 1. Electric Motors | 1. This machine is best suited for small batch production or when cost of press tools and dies is prohibitive. |
| 2. Milling Attachment | 2. Pannel Board | 2. Die & Mould Manufacturers |
| 3. Taper Boring Attachment | 3. Coolant Pump | 3. Aerospace |
| 4. Threading Attachment | 4. Medical Equipment | |
| 5. Micro Boring Head | 5. Textile Machinery | |
| 6. Digital Read Out | 6. Diamond & Jewellery Industries | |
| 7. Allied Machinery | ||
| 8. Plastic Processing Machinery | ||
| 9. Defence |
HIPAT Precision Heavy Duty Radial Drilling Machines have a stremlined modern outlook and contain all the characteristics normally expected in a superiior qualillty machine.All the castings are of close-grained, heavy duty alloyed cast iron and amply ribbed to withstand stress without distortion, the shafts are of special quality steel andare having ground finish. all the bearings, shafts and gears of the main assemblies are force lubricated properly. the gears are induction hardened.
The hardened and ground spindle run in a hardened and super-finished barrel, which slides an honed sleeve of the gear-box, the locking of the gear-box to arm and the radial movement is having special design to hold it rigidly during drilling operation.
