Write a ReviewOur Products
We offer the best product range of Hydraulic Hacksaw Machine, Hydraulic Shearing Machine and Hydraulic Honing Machine.
Main features
Hydraulic Feed ControlHydraulic Relief to Swa Blades on non-cutting Stroke.Automatic lift to bow on completion of cutting cycle and motor switched off automatically.Two speeds and driven by V- Belts.Cut Metals of all kinds and strengths.High output at low initial cost.
Saw frameThis is of rigid construction and runs in prismatic gudide ensuring a square and parallel cut, this cut takes place on the draw stroke and the blade is hydraulically lifed out of contact with workpiece on the forward to prevernt stroke to prevernt wear or the blade and can cut metals of all kinds and strength.
FeedTwo leavers are provided at the dash pot one regulates the rate of feed while the other enables to be raised or forwarded hydraulically bow raised automatically and motor switched off on completion of the cut.
BedThe bed of his large proportion provided with guide ways for the vice for clamping the material vice is of rigid construction one jaw remains fixed and the other can be adjusted according to the materials to be cut.
Electical equipmentA direct on line push button starter can be fitted which incorporates an adjustable trip mechanism which stops the machine as soon as the blade is clear from the work, non productive time is reduced to minimum.
DrivePower is supplied by a suitable electric motor through vee-belt which are full adjustable for tension all drive mechanism being totally enclosed.
SpeedThe incorporation of two speed driving mechanism allows for the most suitable speed to be selected for material being cut.
CoolantThe coolant tank is totally enclosed in the machine base and a contant speed pump supplies coolant to the saw blade through a stay put pipe and tap.
Technical Specifications
| SIZE | 8” | 10” | 12” | 16” | 20” | 24” |
| STROKE (ADJUSTABLE) | 51/2” | 51/2” | 51/2” | 51/2” | 51/2” | 51/2” |
| NO OF STROKE PER MINUTE | 100 TO 120 | 85 TO 100 | 85 TO 100 | 70 TO 85 | 60 TO 75 | 60 TO 75 |
| BLADE SIZE | 12” OR 14” | 16” OR 18” | 18” OR 20” | 22” OR 24” | 30” | 36” |
| CAPACITY OF ROUND BAR | 7” | 10” | 12” | 16” | 20” | 24” |
| CAPACITY OF SQUARE BAR | 5” | 8” | 10” | 13” | 16” | 16” |
| R.P.M | 1440 | 1440 | 1440 | 960 | 960 | 960 |
| ELECTRIC MOTOR REQUIRED | 1 H.P | 2 H.P | 2 H.P | 3 H.P | 5 H.P | 7.5 H.P |
| LENGTH | 3’-2” | 3’-10” | 4’-2” | 4’-10” | 5’-10” | 6’-2” |
| BREATH | 1’-4” | 2’-3” | 2’-3” | 2’-6” | 3’-2” | 3’-2” |
| HIGHT | 2’-8” | 3’-6” | 3’-6” | 5’-0” | 6’-0” | 6’-6” |
| WEIGHT(APPROX) | 300 kgs. | 550 kgs | 600 kgs. | Kgs | 1100 kgs. | 1300 kgs. |
| V-Belt required | 3 Pcs. | 3 Pcs. | 4 Pcs. | 4 Pcs. | 4 Pcs. | 4 Pcs. |
| OPTIONAL ACCESSORIES | STANDARD ACCESSORIES | APPLICATIONS |
|---|---|---|
| 1. BAR SUPPORT STAND | 1. HIGH GRADE CASTING BODY | 1. TOOL ROOMS |
| 2. TILTING ANGULAR VICE | 2. ROBUST FRAME | 2.EDUCATIONAL INSTITUTES |
| 3. HACKSAW BLADE | 3. COLANT TRAY | 3. WORKSHOPS |
| 4. ELECTRIC COOLANT PUMP | 4. INSTRUCTION MANUAL | 4. ROLLING MILLS ETC |
| 5. ELECTRIC MOTOR, STARTER, VEE BELT |
Squaring arm 1000mm at left with hardened lines.
Squaring arm 600mm at right helps distribute wear.
Front gauging with stops, scale on squaring arm.
Hardened rods recessed table for easy sheet feeding.
Sheet supports 1000mm help supports long plates.
Ramp on rear slides cut out sheet outside shear area.
Foot switch movable for operation from self position.
Finger safety guard with clear view of lighted cutting area.
Efficient compact power pack minimum piping.
Electrical neatly wired-cabled for trouble shooting.
| Model | Shearing Length mm | Shear Thic. Rake Angle/(Min./Max.) | Rake Angle | Rake Angle Range | Strokes/Minute at Min. & Max. Rake Angle | Holddowns | Holding Force kgs. | Power H.P. | Over all Diamensions in mm (L x W x H ) | Approx. Weight Kgs. | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| LHVR325 | 2500 | 3.15 / 4 | 2 / 3 | 1’15” | 0.5-2” | 28-13 | 13 | 2500 | 5 | 3150 x 2000 x 2400 | 3800 |
| LHVR330 | 3000 | 3.15 / 4 | 2 / 3 | 1’15” | 0.5-2” | 24-9 | 16 | 2500 | 5 | 3500 x 2000 x 2400 | 4400 |
| LHVR412 | 1250 | 4 / 6 | 3 / 4 | 1’37” | 0.5-3“ | 33-17 | 5 | 4000 | 5 | 2000 x 2000 x 2400 | 2700 |
| LHVR415 | 1500 | 4 / 6 | 3 / 4 | 1’37” | 0.5-3“ | 30-15 | 8 | 4500 | 5 | 2250 x 2000 x 2400 | 3200 |
| LHVR420 | 2000 | 4 / 6 | 3 / 4 | 1’37” | 0.5-3“ | 28-13 | 11 | 6200 | 7.5 | 2750 x 2000 x 2400 | 3500 |
| LHVR425 | 2500 | 4 / 6 | 3 / 4 | 1’37” | 0.5-3“ | 26-8 | 13 | 8000 | 7.5 | 3400 x 2350 x 2450 | 5200 |
| LHVR430 | 3000 | 4 / 6 | 3 / 4 | 1’37” | 0.5-3“ | 24-6 | 16 | 10000 | 10 | 4000 x 2350 x 2450 | 6000 |
| LHVR440 | 4000 | 4 / 6 | 3 / 4 | 1’45” | 0.5-3“ | 22-6 | 20 | 12000 | 10 | 4500 x 2350 x 2450 | 8500 |
| LHVR615 | 1500 | 6 / 8 | 4 / 6 | 1’45” | 0.5-3“ | 24-8 | 9 | 6600 | 10 | 2250 x 2350 x 2500 | 4000 |
| LHVR620 | 2000 | 6 / 8 | 4 / 6 | 1’45” | 0.5-3“ | 22-7 | 11 | 6500 | 10 | 2750 x 2350 x 2500 | 4300 |
| LHVR625 | 2500 | 6 / 8 | 4 / 6 | 1’45” | 0.5-3“ | 28-8 | 14 | 8500 | 15 | 3400 x 2350 x 2500 | 6200 |
| LHVR630 | 3000 | 6 / 8 | 4 / 6 | 1’45” | 0.5-3“ | 24-6 | 16 | 10800 | 15 | 4000 x 2200 x 2500 | 7000 |
| LHVR640 | 4000 | 6 / 8 | 4 / 6 | 2” | 0.5-3“ | 24-6 | 20 | 13600 | 20 | 5100 x 2700 x 2800 | 8400 |
| LHVR815 | 1500 | 8 / 10 | 6 / 8 | 2” | 0.5-3“ | 22-10 | 9 | 10500 | 15 | 2250 x 2600 x 2650 | 5000 |
| LHVR820 | 2000 | 8 / 10 | 6 / 8 | 2” | 0.5-3“ | 18-8 | 11 | 12500 | 15 | 2750 x 2600 x 2650 | 5500 |
| LHVR825 | 2500 | 8 / 10 | 6 / 8 | 2” | 0.5-3“ | 24-8 | 14 | 16300 | 20 | 3500 x 2600 x 2650 | 6800 |
| LHVR830 | 3000 | 8 / 10 | 6 / 8 | 2” | 0.5-3“ | 20-6 | 16 | 18500 | 20 | 4200 x 2600 x 2650 | 7700 |
| LHVR840 | 4000 | 8 / 10 | 6 / 8 | 2” | 0.5-3“ | 20-8 | 20 | 23000 | 25 | 5200 x 2900 x 2800 | 13500 |
| LHVR1015 | 1500 | 10 / 13 | 8 / 10 | 2” | 0.5-3“ | 20-10 | 9 | 10500 | 15 | 2250 x 2650 x 2700 | 5500 |
| LHVR1020 | 2000 | 10 / 13 | 8 / 10 | 2” | 0.5-3“ | 18-8 | 11 | 12600 | 15 | 2750 x 2650 x 2700 | 6000 |
| LHVR1025 | 2500 | 10 / 13 | 8 / 10 | 2” | 0.5-3“ | 24-8 | 14 | 17500 | 20 | 3600 x 2650 x 2700 | 8000 |
| LHVR1030 | 3000 | 10 / 13 | 8 / 10 | 2” | 0.5-3“ | 20-6 | 16 | 20000 | 20 | 4200 x 2650 x 2700 | 10500 |
| LHVR1040 | 4000 | 10 / 13 | 8 / 10 | 2” | 0.5-3“ | 18-6 | 20 | 25000 | 30 | 5200 x 2900 x 2900 | 15200 |
| LHVR1320 | 2000 | 13 / 16 | 10 / 13 | 2” | 1-3” | 13-5 | 11 | 16500 | 20 | 2750 x 2650 x 2950 | 7000 |
| LHVR1325 | 2500 | 13 / 16 | 10 / 13 | 2” | 1-3” | 15-10 | 13 | 32000 | 25 | 3600 x 2650 x 2950 | 9600 |
| LHVR1330 | 3000 | 13 / 16 | 10 / 13 | 2” | 1-3” | 12-6 | 16 | 37000 | 25 | 4200 x 2650 x 2950 | 11800 |
| LHVR1340 | 4000 | 13 / 16 | 10 / 13 | 2” | 1-3” | 10-4 | 20 | 22000 | 30 | 5200 x 3000 x 3050 | 17800 |
| LHVR1620 | 2000 | 16 / 20 | 13 / 16 | 2” | 1-3” | 13-7 | 11 | 20000 | 25 | 2750 x 2950 x 3150 | 12000 |
| LHVR1625 | 2500 | 16 / 20 | 13 / 16 | 2” | 1-3” | 15-8 | 13 | 40000 | 30 | 3600 x 2950 x 3150 | 12000 |
| LHVR1630 | 3000 | 16 / 20 | 13 / 16 | 2” | 1-3” | 12-6 | 16 | 43500 | 30 | 4250 x 2950 x 3150 | 15300 |
| LHVR1640 | 4000 | 16 / 20 | 13 / 16 | 2” | 1-3” | 10-4 | 20 | 30000 | 30 | 5200 x 3050 x 3500 | 21500 |
| LHVR2020 | 2000 | 20 / 25 | 16 / 20 | 2” | 1-3” | 16-8 | 11 | 32000 | 40 | 2900 x 2950 x 3150 | 17000 |
| LHVR2025 | 2500 | 20 / 25 | 16 / 20 | 2” | 1-3” | 15-8 | 13 | 48000 | 40 | 3600 x 2950 x 3150 | 18000 |
| LHVR2030 | 3000 | 20 / 25 | 16 / 20 | 2” | 1-3” | 12-6 | 16 | 52000 | 40 | 4250 x 2950 x 3150 | 20000 |
| LHVR2040 | 4000 | 20 / 25 | 16 / 20 | 2” | 1-3” | 10-4 | 20 | 30000 | 50 | 5200 x 3050 x 3500 | 24000 |
| OPTIONAL ACCESSORIES | STANDARD ACCESSORIES | APPLICATIONS |
|---|---|---|
| 1. Sheet front feeding system. | 1. Moving beams synchronized by differential cylinders. | 1. ELECTRIC PANNELS |
| 2. NC background with ball screw. | 2. Shearing-clamping forces adjustable to suit jobs. | 2. ROOFINGS |
| 3. Hydraulic rear sheet support. | 3. Both Blades premium HCHCR, with four useable edges. | 3. BUS BODIES |
| 4. Automatic control shearing. | 4. Cutting lengths and positions adjustable for shorter jobs. | 4. KITCHEN EQUIPMENTS |
| 5. Sheet rear stacking system. | 5. Beam returns on releasing foot switch smaller cut. | 5. GENERATOR ENCLOSURES |
| 6. Motorize back gauge | 6. Cutting area illuminated for clear view of blades. | 6. STEEL TANKS |
| 7. Self lubrication | 7. First two hold downs spaced closer at both ends | 7. STAINLESS STEEL EQUIPMENT’S |
| 8. Motor mounting bracket | 8. COIL CUTTING INDUSTRIES | |
| 9. Motor pulley | 9. AIR CONDITION DUCTS | |
| 10. V belts | 10. CONTAINER MANUFACTURING | |
| 11. FLOUR MAKING MACHINES | ||
| 12. INDUSTRIAL STRUCTURES | ||
| 13. RAIL COACHES | ||
| 14. TIPPER TRUCKS | ||
| 15. WIND MILL MANUFACTURING | ||
| 16. TURNINE ENCLOSURES |
Hipat Machine Tools(Hipat Machine Tools)
Plot no 133,C/o pathak machinery works,G.t road, dhandari khurd, -,, G. T. Road, Ludhiana, Punjab - 141011
Share us via 
