Write a Review
Our Products
Our product range contains a wide range of Pet Felt and HI Density PET Felt Sheet
Polyester felt is a general purpose synthetic needle punched felt made in various densities thicknesses, often made in comparable density and thickness to SAE pressed wool felt.
Needle punched felt refers to felt that is made by vertically needling fibers together to achievea desired thickness and density. Needled felt is commonly made from polyester fibers. Whenviewing a cross-section of needled punched felt, the fibers lay vertically, as opposed topressed felt, where the fibers lay horizontally.
Polyester felt is a synthetic needle punched felt made from polyester fibers. Material is normally supplied either black or white. This special purpose felt is made in various densitieswith thicknesses ranging from 2mm to 20mm. Polyester felt is fairly inexpensive, and often made in comparable density and thickness to SAE pressed wool felt. The maximum temperature of polyester felt is 300 degree F, compared to 200 degrees for SAE pressed wool felts.
APPLICATIONThis material is commonly used for covering steel coils, under mat for steel coils, rods, heavy metal parts, filtration applications, gaskets, wipers, and padding in a wide variety of industries.The density of polyester felt is commonly measured in gms/per Sq. mtr.The high density felt can bear weight of unto 30 MT repeatedly for months and years together without wearing off.
| Parameter | Value | Measure |
| Weight | 2300-2500 | grams / sqm |
| Thickness | 8-10 | mm |
| Air Permeability | 5.8 - 7.5 | m3 /m |
| Max Breaking Strength | 105- 135 (down) | kg/5cm width |
| 130-160 (cross) | kg/5cm width | |
| Elongation | 85-95 (down) | % at break |
| 65-80 (cross) | % at break | |
| Bursting Strength | 60-75 | kg/ sqcm |
| Operating Temperature | 130 - 170 degrees C | dry heat |
| Max Surge Temperature | 150-180 degrees C | dry heat |
| Surface Resistance | 10 6 | ohm (ASTM D257) |
| Finish | Needle Punched | Double to Tripple layer |
Polyester felt is a general purpose synthetic needle punched felt made in various densities thicknesses, often made in comparable density and thickness to SAE pressed wool felt.
Needle punched felt refers to felt that is made by vertically needling fibers together to achievea desired thickness and density. Needled felt is commonly made from polyester fibers. Whenviewing a cross-section of needled punched felt, the fibers lay vertically, as opposed topressed felt, where the fibers lay horizontally.
Polyester felt is a synthetic needle punched felt made from polyester fibers. Material is normally supplied either black or white. This special purpose felt is made in various densitieswith thicknesses ranging from 2mm to 20mm. Polyester felt is fairly inexpensive, and often made in comparable density and thickness to SAE pressed wool felt. The maximum temperature of polyester felt is 300 degree F, compared to 200 degrees for SAE pressed wool felts.
APPLICATIONThis material is commonly used for covering steel coils, under mat for steel coils, rods, heavy metal parts, filtration applications, gaskets, wipers, and padding in a wide variety of industries.The density of polyester felt is commonly measured in gms/per Sq. mtr.The high density felt can bear weight of unto 30 MT repeatedly for months and years together without wearing off.
| Parameter | Value | Measure |
| Weight | 2300-2500 | grams / sqm |
| Thickness | 8-10 | mm |
| Air Permeability | 5.8 - 7.5 | m3 /m |
| Max Breaking Strength | 105- 135 (down) | kg/5cm width |
| 130-160 (cross) | kg/5cm width | |
| Elongation | 85-95 (down) | % at break |
| 65-80 (cross) | % at break | |
| Bursting Strength | 60-75 | kg/ sqcm |
| Operating Temperature | 130 - 170 degrees C | dry heat |
| Max Surge Temperature | 150-180 degrees C | dry heat |
| Surface Resistance | 10 6 | ohm (ASTM D257) |
| Finish | Needle Punched | Double to Tripple layer |
Sardar Jagjit Singh (Hi -Tech International)
St.1, Jammu Colony, Near Preet Palace, Ludhiana, Model Town, Punjab - 141003, India
Share us via
