Write a Review
Our Products
We offer a complete product range of Rust-X WRP 910C, Cleaning Agents, Rust-X Cleaning Agent, VCI SHEETS AND ROLLS and Sheets Roll
| VCI sheetsandrollsare available in various sizesand can be used for wrapping large or small componentsor equipments and for covering corrugation/ honeycomb layers. |
Aquaflushis specially designed for achievement of low Millipore values on components. It is used in inter-operational and final cleaning operations of multi-metal parts and components and is suitable for use in a wide range of industrial spray and intensive flood wash machines.
Aquaflushis particularly recommended wherecorrosion protectionduring short-term storage is required.Aquaflusheffectively removes soluble oils, light dutyneat cutting or forming oils, lubrication oils, soft film corrosion preventives and general dirt.
| Product Code | Protection Period | PH | Concentration |
|---|---|---|---|
| AQ03 | 2 Days | 9 | 2-3% |
| AQSYN | 2 Days | 14 | 2-5% |
VCIJelly/Paste is a soft brown viscous liquid jelly which can be applied with a brush on the parts to be protected. The compound is highly active against corrosion under the most damaging environmental conditions and provides long term corrosion protection.
The Jelly/Paste molecules are highly hydrophobic and do not allow moisture or water to permeate through the layer protecting the metal from corrosion. The Jelly/Paste is highly active against acidic fumes and provides excellent corrosion protection in the acidic environments such as pickling areas or sea humidity. The property of High Reserve Alkalinity allows for a heavy buffer against acidic fumes.
This can be used to coat structures and equipment which has to be placed in the open areas, undergo rough handling, unpacked refinery equipment, oil pipeline equipment and parts, off shore refineries, heat exchange, wind mill parts and other process equipment and parts
Application Method:Brush Application
Suitable for:Castings, Forgings, Fabricated Equipment, Machined Parts
Features
Advantages
Water based rust preventive are the latest generation of Rust Prevention Oils which are also eco-friendly. This is due to ability of mixing with high water content & solvent free product which upon evaporation does not harm the environment & doesnt release CFCs or gases that may harm the environment.
The WRP 910 Conc. is delivered as a brown emulsion that has to be mixed with H2O in 1:10 to 1:5 concentration. The final film left after application allows water to evaporate and forms a rust preventive film.
WRP 910 Conc. is corrosion preventive for medium to short term and can be spray or dip applied on to the components.
WRP 910 Conc. also contains VCI chemicals which also work in vapour phase and prevents corrosion inareaswhich may not have been directly contacted with the rust preventive.
APPLICATION METHODCastings, Forgings, Steel Tubes, Rods, Fasteners Machined Components, Gears and Bearings
| Properties | Test Method | Value |
| Color | White Emulsion | |
| Viscosity @ cSt (conc) | 60 cST | |
| Color | after | Transparent |
| Corrosion Protection | Up to 3 months indoor Up to 1 days outdoors w/o direct rain |
|
| Viscous (cSt) of Emulsion | 1.5-2.5 cSt at 10% dilution | |
| Flash point | 190 degree C | |
| Salt Spray Test | ASTMB117 | 96 hours for pure concentrate |
| Humidity Chamber Test | ASTM 1748 | 600 hours for pure concenterate |
| Film Thickness | 5-15 microns | |
| Minimum dilution ration in | 1:5 | |
| Maximum dilution ratio in | 1:15 | |
| Density at 60 degree C | 0.92-0.94 | |
| Washability | Yes | |
| Removability | Yes | |
| Paintability | Yes |
| Air pad machine for applications of high risk to protect damage to components and parts. |
| Air pad machinefor applications of high risk to protect damage to components and parts. |
| RUST-XS REVOLUTIONARY HUMID-X+BUCKET FUNCTIONS AS DUAL ACTION SYSTEM COMPRISING: 1. Moisture Absorption:Dehumidification (Moisture Removal) from air. 2. Corrosion Control: | |
|
Collar Hinge Pallet boxesoffer a very convenient solution for economic, reusable and globally recyclable system of packaging for automotive and electronic components. The pallet can be assembled and disassembled in layer and provides easy placement of parts which have to be placed in different layer as well as easy removability during use or and assembly lines.
These are availlable in different standard and custom sizes to suit customer requirements. Dividers and partitions are also available to allow different layers and separations between components to prevent collision of parts during sea or land transportation.
These are made from high quality wood and can be reused from 15-20 times containers shipped of boxes with parts can be brought back in 1 container for use
These are easy to assemble boxes supplied in flat form and are delivered as pallet base and sides. the boxes are made of special high strength plywood with sides made up of steel hinges that provide high strength for stacking of pallets.
The complete pallet can be assembled within a few minutes by fixing the steel tongues into the hinges.
As supplied the pallets consume only 20% of the volume compared to assembled boxes.
These are available in standard Euro Sizes and can also be supplied in custom sizes to suit client requirements.
TheHTIprovides packaging solutions for themetal coilindustry. Our commitment to the industry has resulted in the development of innovative, cost efficient products that address problems like loose, irregular packaging. Our sales, equipment service, customer service and engineering departments can help you design the optimum protective packaging system for your application. To learn more aboutHTIcoil wrapping machine for steel coil, please check the following information
Description:HTI-Sseries is steel coil wrapping machinewhich mainly used tosteel coil, steel strip packaging, slit strip.with highly efficiency and nice packaging for saving labor and material cost. The packaging is with eye crossing wrapping, which allow steel coil a nice, firm for dustproof, waterproof.
Features:
1.PLC & HMI for automatic operation.
2.Special system for easy loading and unloading.
3.Manual and automatic working mode for easy operation.
4. The converter is adopted to adjust the speed of the ring and rollers
5. Overlap of the packing tape according to requirement.
6.Automatic material cutting.
7.Guardrails, soft starts and stop for safety operation.
8.Height of the ring could be adjusted for different OD of the coil
9.Packaging tension is adjustable by special breaker.
10.The rollers are wrapped by polyurethane for protect the surface of the coils.
11.Indicator alarms automatically when trouble occurs. Trouble can be shown automatically.
12.Special brake for the tape release device to avoid material folding.
13. Widely packing material applicable.
| HTI-400 | HTI-400 | HTI-500 | HTI-600 | HTI-800 | |
| Voltage (V/Hz) | AC 380/50( or your requirement) | ||||
| Power (KW) | 1.5 | 2.2 | 4.0 | 6.0 | 8.0 |
| Steel coil ID(mm) | >300 | >300 | >400 | >500 | >500 |
| Steel coil OD(mm) | 600-900 | 800-1000 | 800-1200 | 800-1400 | 800-1600 |
| Steel coil width(mm) | 20-300 | 50-400 | 50-500 | 50-600 | 50-800 |
| Steel coil Weight(Kg) | <300 | <1000 | <2000 | <4000 | <5000 |
| Packing material | PE/Stretch film/knit belt/VCI paper | ||||
| Ring speed(r) | 30-80 | 30-80 | 30-70 | 30-60 | 30-60 |
| Wrapping speed | 30-40sec/pcs | 35-45sec/pcs | 40-50sec/pce | 40-55sec/pcs | 50-60sec/pcs |
| Overlapping rate | 20-80% | ||||
| Air supply. | 5-7kgf/ c㎡ | ||||
Protective packaging machine for copper coil, copper wire, copper tube.
Our protective packaging systems forcopper coil, copper wire, copper tube. products are designed to prevent product damage during transport, shipping and storage. Thesecopper coil wrapping machinemay consist of plastic wrapping, stretch film, paper or a combination of these packaging materials. Our sales, equipment service, customer service and engineering departments can help you design the optimum protectivepackaging machinefor your application. To learn more aboutHTIcopper coil wrapping machine, please check the information as following:
| HTI series iscopper coil packaging machinewhich mainly used to copper wire packaging, copper coilpackaging, copper tube coil packaging, steel coil packing. which is with highly efficiency and nice packaging for saving labor and material cost. Features: 1.PLC & HMI for automatic operation with can be connected with production line. 2.Special system for easy loading and unloading. 3.Manual and automatic working mode for easy operation. 4. The converter is adopted to adjust the speed of the ring and rollers 5. Overlap of the packing tape according to requirement. 6.Automatic material cutting. 7.Guardrails, soft starts and stop for safety operation. 8.Central positioning for the best packaging. 9.Packaging tension is adjustable by special breaker. 10. Widely packing material applicable. 11.Indicator alarms automatically when trouble occurs. Trouble can be shown automatically. 12.Special brake for the tape release device to avoid material folding. Note: Can be designed according your specification. |
| HTI-200 | HTI-300 | HTI-400 | |
| Voltage (V/Hz) | AC 380/50( or your requirement) | ||
| Power (KW) | 1.5 | 1.8 | 2.5 |
| Steel coil ID(mm) | 150-300 | 300-600 | 300-900 |
| Steel coil OD(mm) | 200-400 | 600-1000 | 700-1200 |
| Steel coil width(mm) | 20-200 | 20-200 | 50-300 |
| Steel coil Weight(Kg) | 5-20 | 20-200 | 100-500 |
| Packing material | PE/Stretch film/knit belt/VCI paper | ||
| Ring speed(r/min) | 30-80 | 30-80 | 30-70 |
| Wrapping speed | 25-35sec/pcs | 35-45sec/pcs | 40-50sec/pcs |
| Overlapping rate | 20-80% | ||
Thecable coil wrapping machineis for the cable coil with ID range 150-2000mm. Small machine for small ID, big machine for big ID to get a best packaging.The packing material can bePVC, PE, Paper.
VCI sheetsandrollsare available in various sizesand can be used for wrapping large or small componentsor equipments and for covering corrugation/ honeycomb layers.
These are dry to touchoilsthat leave no stains or residue on the components. The chemical and the oil forms a soft film settles in the cavity of metals roughness and protects the metal from fingerrusting, settlement of moisture, coolants causing corrosion and acid fumes.
AQUEOUS CLEANERSAquaflushis specially designed for achievement of low Millipore values on components. It is used in inter-operational and final cleaning operations of multi-metal parts and components and is suitable for use in a wide range of industrial spray and intensive flood wash machines.
Aquaflushis particularly recommended wherecorrosion protectionduring short-term storage is required.Aquaflusheffectively removes soluble oils, light dutyneat cutting or forming oils, lubrication oils, soft film corrosion preventives and general dirt.
| RP ADDITIVE RPA 4500 |
Leak Testingin water causes deposition of water on metal surface resulting in high moisture content around metal surface. Often heating is done to dry off the water which is slow and costly method.Rust Preventive additiveswhen added with water stops inter process corrosion and protection for a period of upto 7days.RPA4500also prevents fungal and bacterial growth for 3-6 months.
| Product Code | Film Thickness | Protection Period | Drying Time | Flash Point |
|---|---|---|---|---|
| CL000 | 0 micron | 1/2 hr. | 5 mins. | 40° C |
| CI002 | 0.2 micron | 5 Days | 5 mins. | 40° C |
| CI005 | 0.5 micron | 30 Days | 5 mins. | 40° C |
| CL000H | 0 micron | 1/2 hr. | 30 mins + | 90° C |
| CLOO2HFP | 0.2 micron | 5 Days | 30 mins + | 90° C |
| CL005HFP | 0.5 micron | 30 Days | 30 mins + | 90° C |
| CI000 QD | 0 micron | 1/2 hr. | 30 sec | 40° C |
| CI002 QD | 0.2 micron | 5 Days | 30 sec | 40° C |
| Product Code | Protection Period | PH | Concentration |
|---|---|---|---|
| AQ03 | 2 Days | 9 | 2-3% |
| AQSYN | 2 Days | 14 | 2-5% |
Sardar Jagjit Singh (Hi -Tech International)
St.1, Jammu Colony, Near Preet Palace, Ludhiana, Model Town, Punjab - 141003, India
Share us via
