Language / Logo Support : Language Support: Two user-selectable languages are supported as default. With the help of a PC software, user messages can be defined in all languages.
Logo Support: 128 x 64 black and white bmp files prepared by the user can be uploaded onto the
Sensor Type / Field : Capacitive, Industrial / 208 X 288 pixels, 508 dpi
Display / Addressing : Display: With its built-in lighting feature, 128 x 64 Graphic Display used for the reader provides maximum visibility under illuminated or non-illuminated conditions. Graphic Display also supports visual messages and use of logo. All ASCII characters defi
The Gate is open and personel passed info : With two different input ports available on the device, information concerning the gate status or whether anyone has passed through the turnstile is transferred to the control software.
Personal : When the device is connected to the PC, it works online. If the device is disconnected from the PC for any reason or there is some other communication problem, it resumes operating offline according to its preset parameters. Upon restoring PC connection,
Processor / Flash : AD Blackfin 536 / 3MB
Relay Output : Single-contact relay output connected to an external relay card is used. Maximum current capacity for inter-contacts is 1 A. Relay time can be set or cancelled between 1 and 9 seconds by user.
Communication / Data Rate : RS485 / 115.200 Bps
User Capacity / ESD Tolerance : 2000, 1MB( 3 references per user) / 15 kV
User finger recognition : At first AUTHORIZED FINGER will put over the sensor than USER FINGER will put over the sensor for recognition. Finger will be removed and place over again with every short sound of the device. This process is repeated 3 times after if the USER FINGER reco
Deletion of recognized finger : Closer the magnet to the left side surface. Buzzer will sounding in 250ms and green LED light switch on. The device get through the comparison mode. In the meantime, if you read AUTHORIZED FINGER the device delete all tracks in memory that back to the fac
First start running the device : When the first energy given to the device the red led light switch on along 2 seconds and the buzzer make a sound consecutively.
Authorized finger recognition : Closer the magnet to the left side surface. Buzzer will sounding in 250ms and green LED light switch on. The device get through the recognition mode. The finger is placed over the sensor to be granted privileges. Finger will be removed and place over agai
Operate the device normally : When put the finger on the sensor device get through the comparison mode.
a- If the Sensor is active but did not put the compared finger or compared finger is absent in the memory than buzzer is sounding shortly 2 times and red LED light switch on.
We are offering finger print biometric reader. we offer single-contact relay output connected to an external relay card is used. Maximum current capacity for inter-contacts is 1 a. Relay time can be set or cancelled between 1 and 9 seconds by user....
ZK5000 – USB fingerprint reader The ZK5000 Reader is a USB fingerprint reader, the user simply places his or her finger on the glowing reader window, and the reader quickly and automatically scans the fingerprint. On-board electronics calibrate...
85,000/ Piece 
Related Category
For Buyer 
For Seller 
Help 
