Our Products
T130X reinforced ultrafine mill is a new facility designed by TQMC expert basing on statistical analysis and a large number of suggestions from users and the innovative design of the super pressure trapezoidal mill. It has superseded and optimized in the structural characteristics of trapezoidal MTM mill, and it also forms its own unique characteristics.
T130X reinforced ultrafine mill is mainly used in processing materials of metallurgy, building construction, chemicals and mining industry, such as feldspar, calcite, talc, barite, fluorite earth, ceramic , bauxite, phosphate rock, iron oxide, slag, clinker, chemical fertilizers, compound fertilizers, fly ash, coal, coke, lignite, gypsum, graphite, etc.
Name & Model | T130X | |
Ring roll number (pcs) | 4 | |
Major diameter of roller (mm) | Φ410×210 | |
Inner diameter of roller (mm) | Φ1300×210 | |
Revolving Speed (rmin) | 103 | |
Max feed size (mm) | <30 | |
Final size (mm) | 0.074-0.038 | |
Output (T) | 1.8-6.5 | |
Complete physical size (mm) | 7390×9960×8245 | |
Main motor | Model | Y280S-4 |
Power (KW) | 75 | |
Rotate speed (rmin) | 1480 | |
Induced draft fan motor | Model | Y280M-4 |
Power (KW) | 90 | |
Rotate speed (rmin) | 1480 | |
Classifier speed regulating motor | Model | Y160L-4 |
Power (KW) | 15 | |
Rotate speed (rmin) | 1460 (Frequency converter speed control) | |
Elevator | Elevator model | TH210 |
Model | Y100L2-4 | |
Power (KW) | 3 | |
Rotate speed (rmin) | 1430 | |
Jaw Crusher | Jaw Crusher model | PE 250×400 |
Model | Y180L-6 | |
Power (KW) | 15 | |
Rotate speed (rmin) | 970 | |
Magnetic vibrating feeder | Model | GZ3F |
Power (KW) | 0.2 |
Features :
Model | SCM800 | SCM900 | SCM1000 | SCM1250 | SCM1680 |
Working diameter (mm) | Φ800 | Φ900 | Φ1000 | Φ1250 | Φ1680 |
Max feed size (mm) | ≤20 | ≤20 | ≤20 | ≤20 | ≤20 |
Final size (mesh) | 325-2500 | 325-2500 | 325-2500 | 325-2500 | 325-2500 |
Output (kgh) | 500-4500 | 800-6500 | 1000-8500 | 2500-14000 | 5000-25000 |
Model | SCM800 | SCM900 | SCM1000 | SCM1250 | SCM1680 | |
Main motor | Power | 75 | 45×2 | 132 | 185 | 315 |
Analytical engine (FM motor) | Power | 18.5 | 18.5 | 30 | 15x4 | 18.5×5 |
Blower motor | Power | 45 | 55 | 75 | 55×2 | 90×2 |
Crusher | Model | PC400×600 | PC400×600 | PC400×600 | PC600×800 | PC600×800 |
Power | 18.5 | 18.5 | 18.5 | 45 | 45 | |
Elevator | Model | TH-200 | TH-200 | TH-300 | TH-300 | TH-300 |
Power | 3 | 3 | 4 | 5.5 | 7.5 | |
Vibrating feeder | Model | 300×60×1.8 Φ159-1.8 | 300×60×1.8 Φ159-1.8 | 300×60×1.8 Φ159-1.8 | 400×80×2 Φ219-2 | 400×80×2.8 |
Power | 1.5/3 | 1.5/3 | 1.5/3 | 1.5/3 | 2.2 | |
Discharge screw conveyor | Model | LS219-4.5/LS219-3 | LS219-5.8 | LS219-6.9/LS219-5 | LS219-5 | LS273-8.6 |
Power | 3 | 3 | 4 | 3×2 | 5.5×2 | |
Discharge valve | Model | ZJD-200 | ZJD-200 ZJD-250 |
ZJD-200 ZJD-250 |
ZJD-250 | ZJD-300 ZJD-200 |
Power | 0.75 | 0.75 + 1.1 | 0.75+ 1.1 | 1.1 | 1.5+0.75 | |
Pulse dust collectors | Model | DMC120/DMC16 | DMC16 | LDMC25 | LDMC45 | LDMC400×2 |
Air compressor | Model | KSH150D/LG1.5-8 | KSH240D/LG2.4-8 | KSH300D/LG3.6-8 | LG6.2-8 | LG10-8 |
Power | 11 | 15 | 22 | 37 | 55 |
The Raymond grinding mill was ever popular in mining, building materials, chemical engineering and metallurgy industries for size reduction, dispersion, or specialized needs, powder generation and processing for industrial process. Now MTM series grinding mill has better performance than it.
Raymond mill or Raymond grinder is widely used to grind non-flammable and non-explosive materials like barite, calcite, potash feldspar, dolomite, gypsum, talcum, mica, marble, limestone, kaolin, clay, coal etc. It is ever the mainstream grinding machine in powder making industry.
Model | YGM8314 | YGM9517 | YGM4121 |
Roller Quantity(pcs) | 3 | 4 | 5 |
Roller Diameter(mm) | Φ270×140 | Φ310×170 | Φ410×210 |
Ring Diameter(mm) | Φ830×140 | Φ950×170 | Φ1280×210 |
Rev | 130 | 103 | |
Max.Feed Size | 20 | 25 | 30 |
Discharging Size | 1.6-0.045 | 1.6-0.045 | 1.6-0.045 |
Capacity | 1.2-4.6 | 2.1-8 | 5-11 |
Machine Size | 5300×4100×5200 | 7100×5900×7900 | 9200×7250×9700 |
MTM Medium Speed Trapezium grinder is a kind of leading-world-level industrial milling machinery. It is designed by our own engineers and technical workers, basing on industrial mill research of many years and adopting world-leading-powder processing technology. Now a number of customers are fond of it for its incomparable features.
Features :
Application : MTM series grinding mill is widely used in electric power industry, metallurgy industry, chemical industry, building construction, coal industry, fireproofing materials making industry and some others. Materials as kaolin, gypsum, limestone and fly ash are easy ground by the machine.
Name | MTM100 | MTM130 | MTM160 | |
Ring roll number(pcs) | 4 | 5 | 4 | |
Major diameter of roller(mm) | Φ310X170 | Φ410X210 | Φ480X270 | |
Inner diameter of roller(mm) | Φ950X170 | Φ1280X210 | Φ1600X270 | |
Revolving Speed(rmin) | 130 | 103 | 82 | |
Max feed size(mm) | <25 | <30 | <35 | |
Final size(mm) | 1.6-0.045 fineness can reach to 0.038 |
1.6-0.045 fineness can reach to 0.038 |
1.6-0.045 fineness can reach to 0.038 |
|
Output(th) | 3-8 | 6-11 | 9-22 | |
Main unit motor | Power(kw) | 37 | 75 | 132 |
Centrifugal induced draft fan motor | Power(kw) | 37 | 75 | 132 |
Classifier speed regulating motor | Power(kw) | 5.5 | 7.5 | 18.5 |
Elevator | Elevator model | TH210 | TH210 | TH315 |
Power(kw) | 3 | 3 | 4 | |
Jaw Crusher | Jaw Crusher Model | PE200×350 | PE250×400 | PE250×750 |
Power(kw) | 7.5 | 15 | 22 | |
Magnetic vibrating feeder | Main unit motor | GZ2F | GZ3F | GZ3F |
Power(kw) | 0.15 | 0.2 | 0.2 |
LUM Series Ultrafine Vertical Roller Mill adopts TQMC abundant experience in producing vertical grinding mill and the latest technology from Taiwan &Germany. It sets grinding, drying, classifying and transportation as a whole and has been become the Mainstream equipment in ultrafine grinding industry.
LUM Series Ultrafine Vertical Roller Mills are widely used in grinding non-flammable and non-explosive materials under 9.3(the Moh's hardness), such as grinding quartz, feldspar, calcite, talcum, barite, fluorite, iron ore, copper ore quartz, slag, cement clinker, zircon sand, fly ash and carborundum, coal, etc.
Machine model |
LUM1125 |
LUM1232 |
LUM1436 |
Main machine power(Kw) |
185~250 |
280~315 |
355~410 |
Roller number |
3 |
3 |
3 |
Single rotor classifier power(Kw) |
75 |
90 |
110 |
Multi-rotor classifier power(Kw) |
5×15 |
7×15 |
7×(15~18.5) |
Motor power(Kw) |
160~200 |
220~250 |
255~355 |
According to customers requirements, TQMC success in absorbing foreign experience and world-advanced technology, and in producing our vertical products, with self-owned intellectual property right. Now it has wide application in metallurgy, construction, chemical and mining industries, being the preferred equipments in grinding industry.
LM series vertical grinding mills are widely used in grinding non-flammable and non-explosive materials under 9.3(the Moh's hardness), such as grinding quartz, feldspar, calcite, talcum, barite, fluorite, iron ore, copper ore quartz, slag, cement clinker, zircon sand, fly ash and carborundum, coal, etc.
Model | LM80K | LM110K | LM130K | LM150K | LM170K | LM190K | LM220K | LM240K | LM280K | LM340K | LM370K | |
Wheel diameter(mm) | 800 | 1100 | 1300 | 1500 | 1700 | 1900 | 2200 | 2400 | 2800 | 3400 | 3700 | |
Output (th) | 4-10 | 5-15 | 10~28 | 13~38 | 18~48 | 23~68 | 36~105 | 40-130 | 50~170 | 80-240 | 120-300 | |
Finish fineness | μm | 170-45 | 170-45 | 170-45 | 170-45 | 170-45 | 170-45 | 170-45 | 170-45 | 170-45 | 170-45 | 170-45 |
Mesh | 80-325 | 80-325 | 80-325 | 80-325 | 80-325 | 80-325 | 80-325 | 80-325 | 80-325 | 80-325 | 80-325 | |
End product moisture (%) | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | |
Grinding material particle size D80 (mm) | <10 | <10 | <10 | <10 | <10 | <10 | <10 | <10 | <10 | <10 | <10 | |
Grinding material max feed size(mm) | <20 | <25 | <38 | <40 | <42 | <45 | <50 | <50 | <50 | <70 | <70 | |
Moisture of grinding material not to dry (%) | <4% | <4% | <4% | <4% | <4% | <4% | <4% | <4% | <4% | <4% | <4% | |
Moisture of grinding material need to dry (%) | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | |
Into mill air temperature (℃) | <350 | <350 | <350 | <350 | <350 | <350 | <350 | <350 | <350 | <350 | <350 | |
Out of the mill air temperature (℃)) | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | |
Main motor power (kw) | 55 | 110 | 200 | 280 | 400 | 500 | 800 | 1000 | 1250 | 1800 | 2500 |
Vertical Coal Mill Series
Model | LM80M | LM110M | LM130M | LM150M | LM170M | LM190M | LM220M | LM240M | LM280M | LM340M |
Wheel diameter(mm) | 800 | 1100 | 1300 | 1500 | 1700 | 1900 | 2200 | 2400 | 2800 | 3400 |
Output (th) | 3-5 | 7-10 | 10-17 | 16-22 | 20-30 | 26-40 | 35-45 | 50-70 | 70-90 | 100-140 |
Coal powder fineness (R0.08) | 5~20% | 5~20% | 5~20% | 5~20% | 5~20% | 5~20% | 5~20% | 5~20% | 5~20% | 5~20% |
Coal powder moisture (%) | <1% | <1% | <1% | <1% | <1% | <1% | <1% | <1% | <1% | <1% |
Grinding material particle size D80 (mm) | <10 | <10 | <10 | <10 | <10 | <10 | <10 | <10 | <10 | <10 |
Grinding material max feed size(mm) | 20 | 25 | <38 | <40 | <42 | <45 | <50 | <50 | <50 | <50 |
Material moisture of into mill (%) | <15% | <15% | <15% | <15% | <15% | <15% | <15% | <15% | <15% | <15% |
Into mill air temperature (℃) | <350 | <350 | <350 | <350 | <350 | <350 | <350 | <350 | <350 | <350 |
Out of the mill air temperature (℃) | 75~95 | 75~95 | 75~95 | 75~95 | 75~95 | 70~95 | 75~95 | 75~95 | 75~95 | 70~95 |
Raw coal hardgrove grindability index (HGI) | >55 | >55 | >55 | >55 | >55 | >55 | >55 | >55 | >55 | >55 |
Main motor power (kw) | 45 | 90 | 185 | 250 | 315 | 400 | 500 | 630 | 900 | 1400 |
Vertical Slag Mill Series
Model | LM130N | LM150N | LM170N | LM190N | LM220N | LM240N | LM280N | LM340N | LM370N | |
Wheel diameter(mm) | 1300 | 1500 | 1700 | 1900 | 2200 | 2400 | 2800 | 3400 | 3700 | |
Output (th) | 5-14 | 7-20 | 9-27 | 12-30 | 18-55 | 25-60 | 40-90 | 60-120 | 70-160 | |
Finish fineness | μm | 170~45 | 170~45 | 170~45 | 170~45 | 170~45 | 170~45 | 170~45 | 170~45 | 170~45 |
Mesh | 80~325 | 80~325 | 80~325 | 80~325 | 80~325 | 80~325 | 80~325 | 80~325 | 80~325 | |
Slag fineness (㎡/kg) | 420 | 420 | 420 | 420 | 420 | 420 | 420 | 420 | 420 | |
End product moisture (%) | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | |
Grinding material particle size D80 (mm) | <10 | <10 | <10 | <10 | <10 | <10 | <10 | <10 | <10 | |
Grinding material max feed size(mm) | <38 | <40 | <42 | <45 | <50 | <50 | <50 | <70 | <70 | |
Moisture of grinding material not to dry (%) | <4% | <4% | <4% | <4% | <4% | <4% | <4% | <4% | <4% | |
Moisture of grinding material need to dry (%) | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | |
Into mill air temperature (℃) | <350 | <350 | <350 | <350 | <350 | <350 | <350 | <350 | <350 | |
Out of the mill air temperature (℃) | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | |
Main motor power (kw) | 200 | 280 | 400 | 500 | 900 | 1120 | 1800 | 2500 | 31 |
Ball mills are used primary for single stage fine grinding, regrinding, and as the second stage in two stage grinding circuits. According to the need of customers, ball mill can be either wet or dry designs. Ball mills have been designed in standard sizes of the final products between 0.074 mm and 0.4 mm in diameter.
The ball mill is key equipment in grinding industry, especially in mineral ore dressing plants. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc.
Model | Rotate Speed (r/min) | Grinding Media Weight (t) | Max. Feeding Size(mm) | Discharge Size (mm) | Output Capacity(t/h) | Motor Power (kw) |
Ф900×1800 | 36~38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 |
Ф900×3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 |
Ф1200×2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 |
Ф1200×3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 |
Ф1200×4500 | 32.4 | 5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 |
Ф1500×3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 |
Ф1500×4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 |
Ф1500×5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 |
Ф1830×3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 |
Ф1830×4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 |
Ф1830×6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 |
Ф1830×7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 |
Ф2100×3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 155 |
Ф2100×4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 245 |
Ф2100×7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 8-48 | 280 |
Ф2200×4500 | 21.5 | 27 | ≤25 | 0.074-0.4 | 9-45 | 280 |
Ф2200×6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 380 |
Ф2200×7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 |
Ф2200×7500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-30 | 380 |
Ф2400×3000 | 21 | 23 | ≤25 | 0.074-0.4 | 7-50 | 245 |
Ф2400×4500 | 21 | 30 | ≤25 | 0.074-0.4 | 8.5-60 | 320 |
Ф2700×4000 | 20.7 | 40 | ≤25 | 0.074-0.4 | 12-80 | 400 |
Ф2700×4500 | 20.7 | 48 | ≤25 | 0.074-0.4 | 12-90 | 430 |
Ф3200×4500 | 18 | 65 | ≤25 | 0.074-0.4 | According to the process condition | 800 |
Table 1: Technical Parameters of wet Type Ball Mill
Model | Shell Size(mm) | Effective Volume(m3) | Grinding Media Weight(t) | Rotate Speed(r/min) | Power(kw) | Discharge Size(㎜) | Capacity (t/h) | Remark |
Dia.×Length | ||||||||
GMQG1530 | 1500×3000 | 4 | 8 | 27.6 | 75 | 0.8-0.074 | 12-2.8 | 380V |
GMQG1535 | 1500×3500 | 4.6 | 11 | 27.6 | 75-90 | 0.8-0.074 | 14-3.4 | 380V |
GMQG1830 | 1800×3000 | 6.5 | 13 | 25.3 | 132 | 0.8-0.074 | 21-4.8 | 380V |
GMQG1835 | 1800×3500 | 7.58 | 16 | 25.3 | 160 | 0.8-0.074 | 25-5.8 | 380V |
GMQG1840 | 1800×4000 | 8.65 | 17.3 | 25.3 | 185 | 0.8-0.074 | 28-6.6 | 380V |
GMQG1845 | 1800×4500 | 9.75 | 19.5 | 25.3 | 210 | 0.8-0.074 | 31-7.2 | 380V |
GMQG2122 | 2100×2200 | 6.7 | 14.7 | 23.8 | 160 | 0.8-0.074 | 24-5.3 | 380V |
GMQG2130 | 2100×3000 | 9.2 | 17 | 23.8 | 185 | 0.8-0.074 | 26-6.0 | 380V |
GMQG2136 | 2100×3600 | 11 | 19 | 23.8 | 210 | 0.8-0.074 | 29-6.5 | 380V |
GMQG2140 | 2100×4000 | 12.2 | 20.5 | 23.8 | 220 | 0.8-0.074 | 32-7.2 | 380V |
GMQG2145 | 2100×4500 | 13.8 | 22 | 23.8 | 250 | 0.8-0.074 | 36-8.1 | 380V |
GMQG2424 | 2400×2400 | 9.8 | 20 | 22.8 | 220 | 0.8-0.074 | 32-6.6 | 380V |
GMQG2430 | 2400×3000 | 12.2 | 25 | 22.8 | 250 | 0.8-0.074 | 38-7.5 | 380V |
GMQG2436 | 2400×3600 | 14.6 | 30 | 22.8 | 280 | 0.8-0.074 | 42-8.5 | 380V |
GMQG2440 | 2400×4000 | 16.2 | 33 | 22.8 | 355 | 0.8-0.074 | 47-9.5 | 380V |
GMQG2445 | 2400×4500 | 18.2 | 37 | 22.8 | 400 | 0.8-0.074 | 55-10.5 | 380V |
GMQG2721 | 2700×2100 | 10.7 | 24 | 21.7 | 280 | 3.0-0.074 | 84-8.5 | 6-10KV |
GMQG2727 | 2700×2700 | 13.8 | 29 | 21.7 | 315 | 3.0-0.074 | 105-9.0 | 6-10KV |
GMQG2730 | 2700×3000 | 15.3 | 32.5 | 21.7 | 355 | 3.0-0.074 | 120-10 | 6-10KV |
GMQG2736 | 2700×3600 | 18.4 | 39 | 21.7 | 400 | 3.0-0.074 | 145-12 | 6-10KV |
GMQG2740 | 2700×4000 | 20.5 | 43 | 21.7 | 450 | 3.0-0.074 | 159-13 | 6-10KV |
GMQG2745 | 2700×4500 | 23 | 50 | 21.7 | 500 | 3.0-0.074 | 180-15 | 6-10KV |
GMQG3231 | 3200×3100 | 22.65 | 46.9 | 18.6 | 500 | 3.0-0.074 | 182-16 | 6-10KV |
GMQG3236 | 3200×3600 | 26.2 | 52 | 18.6 | 560 | 3.0-0.074 | 190-19 | 6-10KV |
GMQG3240 | 3200×4000 | 29.2 | 57 | 18.6 | 630 | 3.0-0.074 | 210-22 | 6-10KV |
GMQG3245 | 3200×4500 | 32.8 | 65 | 18.6 | 710-800 | 3.0-0.074 | 235-29 | 6-10KV |
GMQG3254 | 3200×5400 | 39.2 | 81.6 | 18.6 | 800-1000 | 3.0-0.074 | 280-35 | 6-10KV |
GMQG3640 | 3600×4000 | 35.6 | 75 | 17.3 | 800 | 3.0-0.074 | 230-25 | 6-10KV |
GMQG3645 | 3600×4500 | 40.8 | 88 | 17.3 | 1000 | 3.0-0.074 | 259-29 | 6-10KV |
GMQG3650 | 3600×5000 | 45.3 | 96 | 17.3 | 1120 | 3.0-0.074 | 288-35 | 6-10KV |
GMQG3660 | 3600×6000 | 54.4 | 117 | 17.3 | 1250-1500 | 3.0-0.074 | 310-38 | 6-10KV |
GMQG3685 | 3600×8500 | 79 | 144 | 17.3 | 1800 | 3.0-0.074 | 450-50 | 6-10KV |
Table 2: Technical Parameters of wet type over-flow ball mill
Model | Shell Size(mm) | Effective Volume(m3) | Grinding Media Weight(t) | Rotate Speed(r/min) | Power(kw) | Discharge Size(㎜) | Capacity (t/h) | Remark |
Dia.×Length | ||||||||
GMQY1530 | 1500×3000 | 4 | 8.4 | 27.6 | 75 | 0.8-0.074 | 11-2.6 | 380V |
GMQY1535 | 1500×3500 | 4.6 | 10 | 27.6 | 75-90 | 0.8-0.074 | 13.2-3.0 | 380V |
GMQY1830 | 1800×3000 | 6.5 | 12 | 25.3 | 110-132 | 0.8-0.074 | 20-4.5 | 380V |
GMQY1835 | 1800×3500 | 7.58 | 15 | 25.3 | 132-160 | 0.8-0.074 | 23-5.0 | 380V |
GMQY1840 | 1800×4000 | 8.65 | 16 | 25.3 | 160-185 | 0.8-0.074 | 25-6.0 | 380V |
GMQY1845 | 1800×4500 | 9.75 | 18 | 25.3 | 185-210 | 0.8-0.074 | 28-6.8 | 380V |
GMQY2122 | 2100×2200 | 6.7 | 14.7 | 23.8 | 160 | 0.8-0.074 | 22-5.0 | 380V |
GMQY2130 | 2100×3000 | 9.2 | 17 | 23.8 | 185 | 0.8-0.074 | 25-5.8 | 380V |
GMQY2136 | 2100×3600 | 11 | 19 | 23.8 | 210 | 0.8-0.074 | 28-6.0 | 380V |
GMQY2140 | 2100×4000 | 12.2 | 20.5 | 23.8 | 220 | 0.8-0.074 | 30-7.0 | 380V |
GMQY2145 | 2100×4500 | 13.8 | 22 | 23.8 | 250 | 0.8-0.074 | 34-8.0 | 380V |
GMQY2424 | 2400×2400 | 9.8 | 18.8 | 22.8 | 210 | 0.8-0.074 | 30-6.2 | 380V |
GMQY2430 | 2400×3000 | 12.2 | 23 | 22.8 | 250 | 0.8-0.074 | 34-6.6 | 380V |
GMQY2436 | 2400×3600 | 14.6 | 25 | 22.8 | 280 | 0.8-0.074 | 40.5-7.9 | 380V |
GMQY2440 | 2400×4000 | 16.2 | 28 | 22.8 | 315 | 0.8-0.074 | 45-8.7 | 380V |
GMQY2445 | 2400×4500 | 18.2 | 31 | 22.8 | 355 | 0.8-0.074 | 50-9.8 | 380V |
GMQY2721 | 2700×2100 | 10.7 | 20 | 21.7 | 280 | 3.0-0.074 | 76-6.0 | 6-10KV |
GMQY2727 | 2700×2700 | 13.8 | 25.5 | 21.7 | 315 | 3.0-0.074 | 98-7.8 | 6-10KV |
GMQY2730 | 2700×3000 | 15.3 | 28 | 21.7 | 355 | 3.0-0.074 | 108-8.8 | 6-10KV |
GMQY2736 | 2700×3600 | 18.4 | 34 | 21.7 | 355-400 | 3.0-0.074 | 130-10.5 | 6-10KV |
GMQY2740 | 2700×4000 | 20.5 | 37 | 21.7 | 400-450 | 3.0-0.074 | 144-11.5 | 6-10KV |
GMQY2745 | 2700×4500 | 23 | 42.5 | 21.7 | 500 | 3.0-0.074 | 180-13 | 6-10KV |
GMQY3231 | 3200×3100 | 22.65 | 22.65 | 18.6 | 450 | 3.0-0.074 | 164-14.4 | 6-10KV |
GMQY3236 | 3200×3600 | 26.2 | 26.2 | 18.6 | 500 | 3.0-0.074 | 171-17.1 | 6-10KV |
GMQY3240 | 3200×4000 | 29.2 | 29.2 | 18.6 | 560 | 3.0-0.074 | 190-20 | 6-10KV |
GMQY3245 | 3200×4500 | 32.8 | 61 | 18.6 | 630 | 3.0-0.074 | 228-22 | 6-10KV |
GMQY3254 | 3200×5400 | 39.3 | 73 | 18.6 | 710 | 3.0-0.074 | 270-26 | 6-10KV |
GMQY3640 | 3600×4000 | 35.6 | 67 | 17.3 | 710 | 3.0-0.074 | 210-20 | 6-10KV |
GMQY3645 | 3600×4500 | 40.8 | 76 | 17.3 | 800-1000 | 3.0-0.074 | 233-26 | 6-10KV |
GMQY3650 | 3600×5000 | 45.3 | 86 | 17.3 | 1120 | 3.0-0.074 | 260-31.5 | 6-10KV |
GMQY3660 | 3600×6000 | 54.4 | 102 | 17.3 | 1250 | 3.0-0.074 | 280-34 | 6-10KV |
GMQY3685 | 3600×8500 | 79 | 131 | 17.3 | 1500 | 3.0-0.074 | 400-45 | 6-10KV |