Capacitance Level Switches

Capacitance Level Switch

• Process Length / Measuring Range : As per Application
• Mounting Connection : 1/2" Standard for Rod probe, others as per request and application
• Special Version : Up to 200 Deg C
• Output : 1 sets of potential free c/o contacts rated at 5 amps, 230VAC for resistive loads per switch point
• Supply Voltage : 12-30 V Dc
• Probe Length / Measuring Range : 100mm to 3m (Rod), 1 to 20m (Rope)
• Electronics : -25oC to +65oC
• Models : 1)Single Point 2) Multipoint up to 4 points
• Supply Type : Manufacturer
• Probe Material : Stainless steel rod /Rope insulated partly or fully with PTFE

TS2000 CLT Capacitance Level Transmitter Switch

• MOQ : 10 Piece
• Accuracy : ±1% F.S.
• Process Temperature : Up To 200°C
• Process Pressure : Up To 16 Kg/cm²
• Supply Type : Manufacturer
• Measuring Range : 100 Mm To 15000 Mm
• Electrical Connection : M12 Connector
• Power Consumption : <5 W
• Linearity : ±1%
• Operating Temperature : −20°C To Specified Limit

Major Instruments Stainless Steel Capacitance Level Switches, Working Pressure : 10Bar

• Brand Name : Major instruments
• Supply Type : Manufacturer
• Packaging Type : Box
• Material : Stainless Steel
• Current Rating : 5Amp

Capacitance Level Switch

• Time Delay Settings : Cover And Uncover Delay: 0.5 to 60 seconds,through potentiometer
• Power Consumption : 5W
• Temperature : - 20 dig C to + 60 dig C
• Switching Delay : Adjustable from 0.5 to 20 Second. for probe covered or uncovered condition.
• Supply Type : Supplier
• Probe Length : Rod: 50 mm to 3000 mm Rope: 400 mm to 12000 mm
• Resonant Frequency : 500 KHz
• Initial Capacitance : 0 to 290 pf. in 3 overlapping ranges. (For single point switching) 0 to 1200 pf. in 3 overlapping ranges. (For pump control & multi point switching)

Capacitance Switch

• Pressure : Up to 40 Kg / cm2
• Connection : Flanged to ASA/BS DIN/ Screwed BSP/NPT
• Tank height Range : 0 to 10 mtrs (depending upon probe)
• Probe Material : SS304/304L/316/316L/PTFE/ Lined/PTFE Lined.
• Temperature : Up to 350°C

Nivo Control Capacitance Level Switch

• Brand Name : Nivo control
• We offer Capacitance level switch. Capacitance Level Sensors (Rod Probes) The Capacitance Level Sensors is offered with a wide selection of probes. These probes are available in user specified lengths up to 3500 mm. Capacitance Level Sensors (Rod Probes) - TECHNICAL...

Capacitance Type Level Switch

• 0-60℃ : 24 v dc / 12 v dc
• IP 65 : 110 mm(L) * 75mm(W) * 57mm(D)
• Supply Type : Manufacturer
• 50mm – 350mmin steps of 50 mm : 6.2cm± 0.2mm

UPE Capacitance Level Switch, Packaging Type : Packed In Corrugated Boxes

• MOQ : 10 Piece(s)
• Applications : Suitable for non-sticky liquids and solids
• Material : UPE
• Packaging Type : Packed in corrugated boxes
• Features : Compact size. Universal industrial power supply (12 to 80 VDC & 12 to 265 VAC). Low power consumption....

Capacitor Switch

• This capacitor switch, depending on the load pattern, will close or open automatically and connect or disconnect the capacitor bank to the lines. The capacitor switch provides not only reactive power compensation at overload current, but also...

Capacitance Level Switches

• LTC is used in sensing level of variety of Liquids. It is available for conductive as well as nonconductive liquids. It is offered with PTFE sleeve for better insulation & to withstand high temperature in conductive tanks the insulated probe acts as...

Capacitance Level Switches

• Length : Variable
• Input power : 12 to 24 volts DC
• Capacitance level indicator: Utilizes the capacitance formed between the sensing probe and the metallic vessel wall. A high frequency sine-wave is applied between the probe and the vessel wall.A change of the medium level will induce a change in the...

RF Capacitance Level Switch

• The rf capacitance level switch provides accurate and reliable level detection of conducting as well as non-conducting liquids, solids or slurries stored in open or closed containers. It can also detect the level of material flowing in closed pipes,...

Capacitance Type Level Limit Switch

• Suitable for all non-sticky liquids and solids. Suitable for side as well as top mounting. Temperature up-to 400'C Process Pressure max.20 bar. PTFE coated for corrosive and conductive liquids...

Capacitance Type Level Liquid Switch

• We are the largest manufacturer, exporter and suppliers of Capacitance Type Level Liquid Switch in Maharashtra, India. This is a cost-effective product which can be installed easily with field adjustable switch points. Our team of experts ensures...

Capacitance Level Switch

• Electronet series  LCS-02  are  Capacitance Type Level Switches . The vessel wall & probe forms two electrodes.  If the vessel is of non-conductive material, the probe will be double rod type. The distance between the electrodes and surface area...

Capacitance Level Switches

• The principle of detection involved is the Capacitance phenomenon, which is developed between the probe and the reference. The amount of capacitance developed in any vessel is determined by the size (surface area) of the probe, the distance from the...

Capacitor Switch

• Feature : Very compact,Maintenance free
• We are the manufacturers and supplier of this products....

Capacitance Level Switch

RF CAPACITANCE LEVEL SWITCH

Capacitance Level Switches

Capacitance Level Switch

Capacitance Type Level Switches

Capacitor Switch

• Purity : Fast acting solenoid mechanism which eliminates pre-strike and re-strike of contacts, Mechanical contact position indicator easily visible from side or bottom of the switch

Capacitance Level Switches