Auxiliary Supply : 110 / 240 V AC, ± 20% 24 / 48 / 110 / 220 V DC ±20%
DC Output (Single / Dual) : 0 - 1 mA, 0 - 10 mA, 0 - 20 mA, 4 - 20 mA, 0 - 5 V, 0 - 10 V Other optional on request
No of Signal Output : Single (Optional Dual Output)
Current transducer Input AC Current Output (DC) single or dual Accuracy 0.5% Operations The input current signal is scaled down through Interposing current transformer. The scaled down signal is fed to a precision rectifier stage, its output is processed to provide DC Voltage Curmore...
The SIM Mini 1.0 AC Voltage and AC Current Transducers find extensive use in monitoring Powerline parameters. The SIM Mini 1.0 Powerline Transducers interface with AC voltage (e.g. 0-100300500 V) & AC Current (CT signals: 0-1A, 0-5A) inputs to provide isolated 0-10V4-20mA DC outpmore...
MECO AC Current Transducers measure AC Current and converts it to an industry standard output signal which is directly proportional to the measured input. These Transducers provide an output which is load independent and isolated from the input. The output can be connected to Conmore...
Standards : IEC 688 / EN 60688, EN 61010-1, EN 61326-1, IS12784 (Part-1)1989
AC Input : 0-5A (Direct),0 - 1A (Direct),CTR/5A, CTR/1A
Type : DIN Series
Dielectric Strength : 2.5kV at 50 Hz for 1 min.(Standard), 4kV (Optional), across Etc.
MECO AC Current Transducers measure AC Current and converts it to an industry standard output signal which is directly proportional to the measured input. These Transducers provide an output which is load independent and isolated from the input. The output can be connected to Conmore...
Transmission OP (DualSingle): Linear current (4 20 mA) or voltage (0-10VDC), Customized Transducer as per your application, Other features: Input calibration ( zerospan), Operating ambient: Temp.: 10C~60°C‚ humidity:more...
AC Input : 0-5A (Direct),0 - 1A (Direct),CTR/5A, CTR/1A
MECO AC Current Transducers measure AC Current and converts it to an industry standard output signal which is directly proportional to the measured input. These Transducers provide an output which is load independent and isolated from the input. The output can be connected to Conmore...
Feature : Design for long life cycles and harsh environments and High resistivity to corrosive environments
The PPT-080 and PPT-110 Proximity Probe Transmitters are used for non-contact measurements of shaft vibration measurements. Each system consists of a probe, extension cable, and a driver. The PPT series proximity probe systems are designed to meet API 670 standards. The voltage omore...
Feature : Designed for long life cycles and harsh environments , Active temperature compensation
The sensor is designed with integrated linearization electronic in order to ensure excellent linearity and active temperature compensation. The built-in oscillator tuned above 750kHz ensures measurement with minimal magnetic run out effect. The PPT-280 can be used either for measmore...
Our organization is able enough to distribute consignments on schedule due to a productive supply chain network we have. The raw materials that are used for the production of our finished products are acquired in minimally processed or unprocessed states; these are free from impumore...
Ours is a renowned name in the business to manufacture and export a wide assemblage of DC Current Transducers. Appreciated for their efficient performance, these reliable transducers accept various DC inputs. The proposed series of DC current transducers is normally factory set fmore...
RAYS AC Isolation transducers accepts various AC Inputs depends on the model selected. We offer Different AC Input models ranging from 0-1 A AC, 0-2 A AC, and 0-5A AC models with different auxiliary supply. For any higher range use external CT to convert and use it for higher curmore...
MCR current transducers are available in two product ranges for universal current measurement: choose between adjustable devices for precise mapping of small measuring ranges up to 55 A or compact devices in graded measuring ranges for measuring high currents up to 600 A. Advantamore...
 SECURE  Current Transducers offers accurate true RMS measurements. Upto for load independent galvanically isolated analog ouptputs can be configured for desired input range. Theses transducers comply with IEC60688. more...
current transducer (CT) for 4..20 mA current loops (loop powered 2 wires technology). The module’s main features are high precision, extremely compact size and wide configurability: eight pre-calibrated ranges, DIP-switch selected. T201 allows extremely low consumption and low more...
We are offering current transducer the current transducer ste-a-1t converts a sinusoidal ac current signal into an output signal that can serves several receiving instruments such as indicators, recorders, alarm units etc. The input current is scaled down using a current transformore...