Power Transducers

Active Power Transducer

• Input : Current from CT and voltage from PT
• Supply Type : Supplier
• Supply : 110VAC, 230VAC, 110VDC, 220 VDC
• Mounting : Dinrail
• Accuracy : +/- 0.25 % of span

Reactive Power Transducer

• Output : Isolated DC MA Or DC Voltage
• Packaging : DIN Rail Mounting Enclosure
• Supply Type : Supplier
• Application : Measure AC Power, Convert To DC MA Or DC Voltage Output
• Accuracy : ±0.2% Of Centre Frequency
• Isolation : 4kV Rms 50Hz 1 Minute
• Adjustability : Adjustable 'span' And 'zero'

Multi Function Power Transducer

• Output : 4-20mADC (4 analog output) / RS 485/RS 232 communication  
• Accuracy : +/- 0.2 % of span
• Supply Type : Supplier
• Supply : smps(90-270) VAC / VDC / 48 VDC
• Input : Current from CT and voltage from PT

Power Factor Transducer

• Number Of Flower : DIN Series
• Standards : IEC 688 / EN 60688, EN 61010-1, EN 61326-1, IS12784 (Part-1) 1989
• DC Output : Current : 0-1, 0-5, 0-10, 2-10, 0-20, 4-20mA and Voltage : 0-1, 0-5, 1-5, 0-10, 2-10V
• MECO AC Power Factor Transducers measure the power Factor in 1 Phase and 3 Phase electrical systems. The resulting...

ACTIVE POWER (WATT) / REACTIVE POWER (VAR) TRANSDUCER

• Auxiliary : SMPS - HV : 85 - 265V AC/DC,SMPS - LV : 19 - 90V AC/DC Etc.
• MECO AC Active Power (Watt) & Reactive Power (Var) Transducers measure Power in 1 Phase, 3 Phase 3 Wire and 3 Phase 4 Wire in balanced or unbalanced electrical systems and converts it to an industry standard output signal which is directly proportional to the measured input....

POWER LINE TRANSDUCERS - GENERAL & TECHNICAL SPECIFICATION

• Accuracy range : 0 to 120% , ±0.5% of Span (standard) and Others on request (optional)
• Terminal Protection Cover Reliable & Rugged Static Circuits Low Ripple in outputs Signal Flame Retardant Polycarbonate case Choice of Multiple Asymmetrical Outputs Wide Choice of Suppressed Ranges Open and Short Circuit Protection for Outputs Dual Outputs (Non Isolated Isolated)...

Power Line Transducers

• Accuracy Range : 0 to 120%
• Applicable Standards : Electrical Measuring Transducers for Converting AC Electrical Quantities into DC Electrical Quantiti
• Accuracy : ± 0.5% of Span (standard) Others on request (optional)
• Response Time : < 0.5s for 0 to 90% of Output
• Impulse Test : 4.5KV, 1 x 40µS (W/o Dewing)
• Zero Adjustment. : ± 2% of Span (min.)

Power Transducers

• Dimensions (L x W x D) (mm) : 73 x 150 x 113
• Power Consumption : 3.5 VA - AC, 4 VA - DC
• The input Voltage and current signals are scaled down through interposing potential and current transformer. In case of reactive transducers the voltage signals are 900 phase shifted. The scaled down signals are fed to precision multipliers working...

Power Line Transducer

• Power line transducers are suitable for measuring electrical parameters like ac voltage, current, frequency, pf, kw, kvar and also for dc signal isolation. They are best suited for mcc and pcc panels, amf panels, scada systems, plcs for data...

Reactive Power Transducer

• Supply Type : Manufacturer
• We are offering reactive power transducer this transducer is used for measurement of reactive power for single phase (ste-a-4t) system as well as for 3-phase, 3-wire (ste-b-4t) system and 3-phase 4-wire (ste-c-4t) systems with balance and unbalanced...

Power Factor Transducer

• Supply Type : Manufacturer
• We are offering power factor transducer the ste-a-7t transducer converts the phase angle between current and voltage of a single phase or 3 phase balanced network into an output signal that can serve several receiving instruments such as indicators,...

Power Factor Transducer

• We Offer Power Factor Transducer. The STE-A-7T transducer converts the phase angle between current and voltage of a single phase or 3 phase balanced network into an output signal that can serve several receiving instruments such as indicators,...

Reactive Power Transducer

• We Offer Reactive Power Transducer. This transducer is used for measurement of Reactive Power for single phase (STE-A-4T) system as well as for 3-phase, 3-wire (STE-B-4T) system and 3-phase 4-wire (STE-C-4T) systems with balance and unbalanced load....

Power Line Transducers

• Used for Converting power Line Parameters Into Proportionate Dc Signals, the Power Line Transducers are Ideal for Energy Management Data Acquisition System. the Power Line Transducers are also Suitable for Telemetering, Supervisory Control, Data...

Power Transducers

• Meets to DN-IEC 688. • Easy Installation & Space saving. • Simultaneous detect & display : - Individual Phase to neutral Voltage - Individual Phase Current - Individual Phase watt. - Frequency - Phase to Phase Voltages. - - Power Factor - -...

Multifunction Power Transducer With Display

• We offer Multifunction Power Transducer with Display. * Meets to DN-IEC 688. * Easy Installation & Space saving. * Simultaneous detect & display : • Individual Phase to neutral Voltage • Individual Phase Current • Individual Phase watt. •...

Adjustable Power Transducer