Digital Fatigue Testing Machine Manufacturers and Suppliers

• Max. bending moment (Kg. cm) : 200
• Main Supply : 3ph 440v 50hz
• Weight (Kg) : 120

This machine is used to test the fatigue strength of materials and to draw S-N diagram by research institute, laboratories, material manufacturers and various industries. This is rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at More...

• Ranges : 2.5-12.5 Nm, 12.5-20 Nm
• Overall size (approx)(mm) : 1000*500*600, 1100*500*650
• Weight (approx)(KG) : 100, 120

Digital fatigue testing machine is compact, light and simple design used to test the fatigue strength of materials. The accuracy of applied bending moment of this machine is +- 1% and has a digital counter of 8 digits.Maximum bending moment() ranges from1- 2.5Nm.The testing diameter of the specimen() ranges from 6-10mm.The weight of the machine is approximately 100 or 120KG. More...

• Weight (approx) : 120kg
• Rotating speed : rpm
• Overall size (approx) : L 1000 x W 500 x H 600mm

This machine is light, compact and simple design used to test the fatigue strength of materials and draw S-N diagram used for research institutes, laboratories, material manufacturers and various industries. Table model, no need of foundation. This is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and loaded such More...

25 to 600 kN Axial force rating systems Torsional capacity ± 50N-m to ± 2000N-m Actuator in base or in top cross head to suit application 2-column up to 1100kNmm high stiffness load frames Next generation DSP based servo controller with 32 bit data acquisition 24 kHz data acqusition & 24 kHz servo loop control Accuracy ± 0.5% of read out value for load, strain, stroke, torque and angle

We are the well known manufacturers of a high quality of products such as the Digital Fatigue Testing Machine which is used to find out the fatigue strength of the different materials by the laboratories, material manufacturers and other industries. These products find very accurate measurements and they are very reliable in their readings. Features: PLC Smart Controlled, High Precision Sensors, Cycle Counter With Pr

This machine is light, compact and simple design used to test the fatigue strength of materials and draw S-N diagram used for research institutes, laboratories, material manufacturer and various industries, This is a rotating beam type machine in which load is applied in reversed bending fashion, The standard 8 mm dia specimen is held in special holders at its ends and loaded such that it experiences a uniform bendin

we are considered to be one of the well reputed digital fatigue testing machine manufacturers and suppliers from miraj, maharashtra. we offer world class digital fatigue testing machines that are used to test the fatigue strength of materials. the digital fatigue testing machine provided by us is raised by our clients for being lightweight, compact and simple to operate. the easy availability and wide demand for our

This machine is light, compact & simple in design used to test the fatigue strength of materials & to draw S-N diagram, used for research institutes, laboratories, material manufacturers & various industries. Machine is table model, no need of civil foundation. Rotating beam type machine in which load is applied in reversed bending fashion. Standard 8 mm diameter specimen is held in special holders at its ends & load

• Capacity : 300 inch lbs
• Speed : 2850 rpm
• Maximum bending movement : 400 kg/cm
• Power source : Electric
• Motor : 0.5 H.P
• Phase : 3 Phase

• Weight : 100-150kg
• Usage : Metal Testing
• Voltage : 110V
• Automation Grade : Automatic
• Application : Fatigue Testing
• Color : Natural
• Driven Type : Electric
• Power : 1-3kw
• Warranty : 1 Year

We are engaged in Manufacturing and Supplying of Fatigue Testing Machine. Our Fatigue Testing Machine is generally used to test fatigue test of material to draw S-N diagram by research institutes, laboratories, material manufacturers and various industries. Fatigue testing machine is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen in the Fatigue Testin More...

• Usage : Metal Testing
• Voltage : 220V
• Color : Blue
• Application : Fatigue Testing
• Driven Type : Electric
• Power : 1-3kw
• Weight : 10-50kg

• Type : Testing Machine
• Condition : New
• Overall size (mm) : 1000L X 500W X 600H
• Power : 380V
• Features : PLC Smart Controlled.
• Frequency : 40 to 300 Hz

• Driven Type : Electric
• Automation Grade : Fully Automatic
• Weight : 10-50kg
• Usage : Metal Testing
• Application : Fatigue Testing
• Voltage : 110V, 220V
• Power : 1-3kw, 3-6kw

We provide fatigue testing machines which is used to test the fatigue strength of materials and to draw S-N diagram by research institutes, laboratories, material manufacturers and various industries. Fatigue testing machine is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and loaded such that is experiences a u More...

• Resistivity : Rust Resistant
• Material : Metal
• Surface Finshing : Polished
• Drive Type : Electric
• Weight : 100-150kg
• Application : Industrial

We are well-reputed as one of the supreme Corner Fatigue Testing Machine Manufacturers & Exporters from India. The Corner Fatigue Testing Machines, offered by us, have attracted various industrial sectors to place repeated orders. Uses : Testing of Automotive Wheel Rims Testing the Corner Fatigue More...

• Brand Name : Ramani
• Item Name : Corner Fatigue Testing Machine
• Condition : New, Good
• Place Of Origin : Dera Bassi
• Type : Testing Machine

The team of quality auditors, that we have, strictly checks the entire production process for ensuring zero defects at buyer's end. We are a purchaser's greatest bet if it comes to acquiring corner fatigue testing machine as our organization is a capable supplier. More...

• Frequency : 40 to 300 Hz

They are separated into a static and a dynamic part so that mean loads other than zero can be applied. These machines can also go through zero and perform tension-compression testing. The frequency drop mechanism provides for a method to monitor failure of the specimen that is not possible using a servo hydraulic machine. These machines do not require a COD gauge for pre-cracking CT specimen. More...

• Testing dia of specimen (mm) : 8
• Specification : FT 200
• Weight (Kg) : 120
• Max. bending moment (Kg. cm) : 200
• Accuracy of applied bending moment : ±1%
• Mechanical Counter: No. of digits Multiplying factor : 63
• Gripping dia of specimen (mm) : 12
• Overall size (mm) : 1000L X 500W X 600H
• Ranges : 1 - Kg.cm II - Kg.cm : 25-125 125-200
• Rotating speed in RPM : 4200
• Bending moment adjustable (Kg.cm) : 25-200
• Main Supply : 3ph 440v 50hz
• Power required in HP : 0.5

This machine is used to test the fatigue strength of materials and to draw S-N diagram by research institute, laboratories, material manufacturers and various industries. This is rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at More...

• Frequency : 40 to 300 Hz
• Features : PLC Smart Controlled.
• Type : Testing Machine
• Condition : New
• Overall size (mm) : 1000L X 500W X 600H
• Power : 380V

This machine is used to test the fatigue strength of materials and to draw S-N diagram by research institute, laboratories, material manufacturers and various industries. This is rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at More...

• Speed : 300 to 4200 rpm
• Specimen Dimensions : 20 mm dia; held by collet
• Bending Moment : up to 20 Nm; in steps of 2 Nm
• Timer : 99:59:59 (Hr:Min:Sec); pre-settable
• Counter : 999,999 (Max)

The purpose is to carry out rotating bar bending fatigue tests without deliberately introducing stress concentration in accordance with DIN 50113. A test piece mounted as a cantilever with single point loading is made to rotate and thus subjected to a bending moment. The force giving rise to the bending moment do not rotate.   Features     Auto shutoff on test completion. Rugged floor standing design.   More...

• Gripping dia of specimen : 12 mm
• Testing dia of specimen : 8 mm

This machine is used to test the Fatigue strength of materials and to draw S-N Diagram by research institutes, Laboratories, material manufacturers and various industries. This is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment. The specimen is rotated a More...

• Brand Name : ARUN MAKE
• Model Number : AI-FTM

Application : Fatigue Testing Machines are used to test the fatigue strength of materials and to draw S-N diagram by Research Institution Laboratories, Material manufacturers, and various industries. Models : AI-FTM8   Accuracy & Calibration : This machine conforms to requirement of IS : 5075 - 1969 Standards Salient Features : An interlocking system provided puts off the motor at specimen failure Light weig More...

• Usage : Due to constant R&D, Specfication and features are subject to change without notice. The dimensions
• Certificate : NIL
• Model Number : TSI FDTM C 100 KN VERTICAL
• Brand Name : TEC-SOL COMPUTERISED FATIGUE DYNAMIC TESTING MACHINE
• Power : Load resolution: 20000 counts displacement resolution: 0.01mm
• Strain rate between 5 to 100% of the machine capacity : Strain Rate & Stress Rate like 0.7N/mm²/sec to 70N/mm²/sec
• Place of Origin : Chennai

Capacity: 2 ton frequency:1.5 hz maximum displacement: +- 20mm sample metal only load resolution: 20000 counts displacement resolution: 0.01mm control: thru proportional valve system frame size: height: 600mm, width: 400 mm, depth: 250mm. More...

• Model Number : SAGA 01

Torsional Fatigue test - +_ 30 degrees, Fluctuating radial load (frequency up to 5 Hz), Torsional fatigue to be generated with a crank arrangement (May Be Servo Hydraulic as per requirement) Conical fatigue test- +- 5 degrees, static radial load, and frequency up to 3 Hz. Conical fatigue to be generated with a crank (May Be Servo Hydraulic as per requirement) Radial Fatigue Test :: fluctuating and l static load to be More...

• Brand Name : ROCKWELL

The range we present is quality assured by the professionals and from the initial stages of procurement of raw material, we make stern quality inspections to deliver the best range. To deliver the utmost product range in terms of quality, we do strict quality checks before the dispatch. Features: Robust construction Convenient controls Easy to operate and maintain Long working life More...

• Voltage : 220V
• Usage : Metal Testing
• Automation Grade : Automatic
• Power : 1-3kw
• Weight : 10-50kg
• Driven Type : Electric
• Warranty : 1year
• Color : Grey

We have tied-up with certified vendors who assure us about the quality of the material that we used for product manufacturing. Thus, the finished products comply with high quality standards. With us, buyers are free to place orders and can expect timely deliveries of the same. Our sturdy digital cube testing machine is designed for high-strength, corrosion resistance, superior performance and low maintenance. More...

• Driven Type : Electric
• Automatic Grade : Automatic
• Warranty : 1year
• Color : Available in Many Colors
• Power : 1-3kw
• Use : Testing Strength Of Material
• Weight : 100-200kg
• Voltage : 110V

We are providing highly efficient Digital Tensile Testing Machine that is widely used for checking the breaking force of jute bag, HDPE bag, fabric, non-woven fabric, carpet, etc. Our Digital Tensile Testing Machine is highly in demand owing to features like easy operation, high efficiency, greater accuracy, etc. Digital Tensile Testing Machine that we offer features self-acting calibration function and user-defined More...

• Power Source : Electric
• Finish : Polished
• Usage : Household, industrial, Laboratory
• Condition : New
• Material : Steel

Micro controller based Universal type, with rugged mechanical construction, accurate moisture content is direct readable on 3 digit L.E.D. display. temperature and conductive result are automatically compensated for final moisture percentage reading. No conversion table is neede. The whole instruments is protected in wooden box. Specification : Range : 8-40% Accuracy : ± 0.2% Dimension : 31 x 18 x 19 cm Weight More...

• Capacity : 1000 kn to 2000 kn
• Vertical Gap : 310
• CTM Unit : Pillar Type Base
• Power : Electric Motor - 1 hp/0.75 kw
• Motor Voltage : 440V, 3ph, 50Hz

Digital Compression Testing Machine has been designed to meet the need for simple, economic & reliable means to rest concrete for its comperssive strength. The design expressive of simplicity both of construction & operation, make the machine eassy to use & maintain.The unit is compact, macking it useful for site & Laboratory applications. The Digital Compression Testing Machine are provided with rate controller to e More...

• Power supply : 230V ± 10% 50 Hz
• Max Angle Range : 999.9 degrees
• Accuracy : +/- 1 %

IEICOS Digital Torsion Testing Machine is designed for conducting torsion test on metal or non-metallic materials. IEICOS offers both basic and advanced versions of torsion testing machine with manual or motorized loading. A high-precision strain gauge based reaction torque sensor measures torque applied. Precision encoders measure the angle of rotation. Two digital displays for torque and angle of rotation are provi More...

• Capacities available : 50 Kgf, 100 Kgf, 250 Kgf, 500 Kgf, 1000 Kgf, 2500 Kgf, 5000 Kgf and 10,000 Kgf.
• Approx Price : Rs 1.5 Lakh/Piece

As a trusted name, we always make sure that our products are properly packed and remain free from damage during transit. For this, we have hired an adroit team of experts having immense experience in packaging. Our quality analysis system is headed by experienced quality auditors who check each and every product at different levels. More...

Our Digital Computerized Hydro Pressure Testing Machine is built-to-last long and requires the least maintenance. Being a quality conscious firm, we conduct strict quality checks for ensuring the product quality. Our organization has observed impressive rise as Digital Computerized Hydro Pressure Testing Machine supplier, courtesy our ability to fulfill to wholesale demands without hassle.

• diameter : 2mm
• Weight : 187.5 kg

Rockwell Superficial Hardness Tester with automatic zero setting dial gauge, manual load selection. The major load are N scale besides all fifteen Rockwell Superficial scales. Can be used with this tester. This model is double purpose Hardness Tester suitable for Both Rockwell & Rockwell Superficial hardness test. The Major load of 15, 30, 45, 60, 100 and 150 kg are applied. More...

• Brand Name : EIE

We are offering Compliance with following Intaernational Standards IS : 14858 - 2000 Introduction The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The digital machines are provided with a More...