Feature : Durable, Eco Friwndly, Fast Cleaning, Fine Finished, Precise Design
Power : 220 VC AC 50 Hz
ELAPSED TIME INDICATOR : Real time clock based record the operation time for each sample in hours and minute
PM 2.5 & PM 10 SIZE SEPARATOR.. : developed specially for acidic dry deposition & 37mm dia, 2mm thickness PTFE membrane filter with PMP (Poly methyl pentene) supporting ring
Brand Name : VAIBHAV
Condition : New
Power Source : Electricity
Automation Grade : Fully Automatic
ACCURACY : 5 % accuracy at 1.0m3/hrs will maintain through microprocessor base event controller data logger it will monitor and control flow through pneumatic constant flow controller.
Power Requirement : Single phase AC 220 volts, 50 Hz, sampler unaffected by +/- 10 % fluctuation in supply voltage. For proper operation and safety a good earth connection is mandatory
Particulate Sampling : 10micron down to 0.1micron (depending upon filter used). A cyclone is used for fractionating the dust into 2 fractions, D50 cutoff for the cyclone is at 10microns. RSPM is accumulated on the filter
Automation Grade : Semi Automatic
Supply Type : Manufacturer
Filter Holder : To accommodate any standard filter paper of 25 x 20 cm, particulate bigger than 10 micron collected in separate dust cap under the cyclone
Condition : New
Total Carbohydrate : ALL VAIBHAV PRODUCTS CARRY 14 MONTH WARRANTY
Feature : Durable, Eco Friwndly, Fine Finished, Precise Design
Particle Size : Up To 10 Micron Collected On Filter And SPM Bigger Than 10 Micron Collected In A Separate Collector Cup Blower Continuous Duty Blower With Brushless Blower Recommended Filter GF/A(8" X 10") For Common Use,
technical specifications:- flow rate :- 0.9 – 1.4 m3 /min free flow particle size :- particles of 10 microns & below collected on filter paper holder. Spm bigger than 10 microns collected in a separate sampling bottle under the cyclone. sampling time :- 28 hours (maximum)...
The APM 860 sampler uses an improved cyclone with sharper cutoff (D50 at 10 microns) to separate the coarser particulates from the air stream before filtering it on the glass microfibre filter. By using the APM 860, measurement of Respirable...
Respirable Dust Sampler Manufacturer in Delhi, India – KDM Environmental KDM Environmental is a reputed manufacturer and supplier of Respirable Dust Samplers (RDS) in Delhi, India , offering CPCB-compliant, field-ready air pollution monitoring equipment for precise measurement...
🟢 PM10 Dust Sampler Manufacturer in Delhi, India – KDM Environmental KDM Environmental is a leading PM10 Dust Sampler Manufacturer based in Delhi, India , offering high-performance air sampling systems for accurate measurement of coarse...
The Sidekick sampling pump - a favorite with SKC customers. Reliability and simplicity make it a good entry level pump, whilst high build quality, means it won’t let you down. All models offer a wide flow range of 5-3000 mlmin, which means the...
We offer a comprehensive range of Respirable Dust Sampler to the clients in national and international markets. These Respirable Dust Samplers are widely used for air quality monitoring. It effectively detects the presence of inorganic gases in the...
We are offering respirable dust sampler. sle-rds103 suspended particles matter( spm) which is defined as particles less that 100 microns & respirable suspended particle less than 10 microns have emerged as the most critical among all the...
Particle size: Below 10 microns collected on filter paper and bigger than 10 Micron will be collected in a separate sampling lid, through Cyclone separator. Flow Rate: 0.9 to 1.4m3/min.. Automatic Sampling: By- 24 Hrs Programmable Timer, Time Record...
Get in touch with us for obtaining top quality and accurate Respirable Dust Sampler ! We are a renowned Manufacturer, Supplier and Exporter of Respirable Dust Sampler in Delhi, India. Sturdy built, superb finish, hygienic and cost-effective are the...
Instantaneous digital read out of dust concentration (No Weighing balance required), Highly sensitive in respirable dust range + 10mgm3, Highly sensitive in respirable dust range + 10mgm3, Choice of ranges for measurement, gives greater flexibility,...
We are offering respirable dust sampler. Netel's model npm-hvs / r is designed to measure repairable suspended particulate matter in ambient air.it is used for collection of pm10 suspended particulate matter upto small as 0.1 micro size.it also has...
We are offering respirable dust sampler. Apm 460 bl is respirable dust sampler also called as pm 10 sampler is used for monitoring pm 10 in ambient air....
Feature : Durable, Eco Friwndly, Fine Finished, Precise Design
Total Carbohydrate : 14 MONTHS
Construction : The body of RDS is robust enough to withstand impacts and vibration in transportation, it is made of heavy aluminum sheet.
Suction Blower... : The impeller is fitted directly onto a bearing mounted shaft of a superior quality flanged electric motor. 100 % oil free required zero lubrication
Condition : New
Supply Type : Manufacturer
Special Feature : Design as per Indian standard BIS 5182(Part 23):2006,digital flow indicator & volume totalizer, waterless manometer eliminate filling of distilled water & maintaining zerolevel in glass manometer tube
Number Of Flower : Respirable Dust Sampler, RESPIRABLE DUST SAMPLER
Particulate Sampling : 10micron down to 0.1micron (depending upon filter used). A cyclone is used for fractionating the dust into 2 fractions, D50 cutoff for the cyclone is at 10microns. RSPM is accumulated on the filter
Sampling Time : 30 hours (maximum)
Brand Name : VAIBHAV
Filter Media : 8” X 10” (203mm X 254mm / 20.3cm X 25.4 cm) Glass microfiber filter for common use and EPM 2000 or equivalent for special monitoring / research work
Feature : Durable, Eco Friwndly, Fine Finished, Precise Design
Particle Size : Separate provision for collection of Respirable and non Respirable (less than and greater than 10 micron) size particles
Feature : Durable, Eco Friwndly, Fine Finished, Precise Design
Supply Type : Manufacturer
Availability : 30-40kg
Filter Media : 8” X 10” (203mm X 254mm / 20.3cm X 25.4 cm) Glass microfiber filter for common use and EPM 2000 or equivalent for special monitoring / research work
Feature : Brushless regenerative blower with very little noise., Heavy duty Induction motor fitted in blower requires no maintenance.
APM 460 DXNL is one of the most advanced PM10 samplers being manufactured in India. It is based on CSIR NEERI technology and is the only PM 10 sampler in India that conforms to BIS 5182 (Part 23): 2006 Automatic flow controller and auto shut off In all previous models of...