Monitoring of stacks and vents are requirement to ensure that emission of air pollutants are within the limit prescribed by regulatory authorities. By regular monitoring of emission one can establish that functioning and performance of installed...
Specifications : Stack Temperature Range: Ambient to 600 deg C read on a Digital Pyrometer. Stack Velocity Range: 3 to 60 m/sec Thermocouple: T/C sensor in SS 304 casing, length of insertion: 1 m with 2m long cable.
MAIN FEATURES Specially to monitor Dioxins, Furan & provision for monitoring of Heavy Metals emissions Collection based on wet chemical techniques Measures total quantity volume of the emissions Heating Probe & box assembly with auto temp controller Rugged & convenient for...
Feature : DigitalPressure Cell in place of cumbersome manometer. Measures total quantity I volume of emissions. Determines velocity of gases. Reduction in size and weight of panel. Extendable arm for pitot and probe pipe. Etc.
The most common and widely used method (world over) is extractive sample method or Grab sampling technique. Grab sampling technique is also often treated as the reference standard method. Grab Sampling technique is not restricted to a specific pollutant. The same system with...
Feature : Cumbersome Manometer has been replaced with digital pressure cell Designed to determine the velocity of gases also. Measures total quantity/volume of the emissions very accurately. Size and weight of panel has been reduced considerably. Etc
Specifications : Stack Temperature Range: Ambient to 600 deg C and 500-1000C read on separate Digital Pyrometers Etc
The most common and widely used method (world over) is extractive sample method or Grab sampling technique. Grab sampling technique is also often treated as the reference standard method. Grab Sampling technique is not restricted to a specific...
Stack Monitoring Kit Manufacturer in Delhi, India – CPCB-Compliant Emission Monitoring System KDM Environmental is a leading Stack Monitoring Kit Manufacturer in Delhi, India , offering precision-engineered systems for accurate measurement of...
Vacuum Pump : Monoblock Rotary vane type oil less, 0.5 HP, Single phase moter (230 V) with 40lmp free flow capacity.
Filter Holder : Fabricated from SS 304 tube suitable to hold either cellulose filteration thimble (size 28 mm ID x 100 mm ling) or glass micro fibre thimble (size 19 mm ID x 90 mm long).
Thermocouple : Thermocouple is made up of SS 304 Casing, length of insertion: 1.0 m with 2 m long cable with suitable connector.
Stack Gas Temp. : Up to 600 degree C A digital pyrometer and 1m
Long thermocouple is provided
Gaseous Sampling : Collections of gases @ 0.3-3 lpm in chemicals kept in a set of 120 ml capacity borosilicate glass impingers
Digital Clock : 0-60 minutes, 1 second readout with start stop and reset functions.
Nozzles : A set of 3 stainless steel nozzles of different diameter
Rotameter : Plastic body rotameter with 2% FSD accuracy, 0-30 lpm for particulate and 0-3 lpm for gases.
Particulate Sampling : SPM collection in thimble type filter (with pore size of 1.6µm with collection efficiency for 0.3µn particles 99.7%)
Located in Delhi, India, we are actively functioning as Manufacturer, Supplier ad Exporter of Stack Sampler all over the country and overseas. Our complete environmental solution Stack Sampler is developed by our team of experts in order to provide...
stack temperature range : ambient to 600 deg c read on a digital pyrometer stack velocity range : 3 to 60 m/sec thermocouple : t/c sensor in ss 304 casing, length of insertion : 0.6m with 2 m long cable manometer : digital with 0 -1200 mm of h20...
Stack Monitoring Kit Consisting as follows: 1) Temperature Range Ambient to 600°C 2) Set of Inter Connection Hoses Pipes. 3) Double Wall Cold Ice Box. 4) Rotary Van type Vacuum pump Cap. 100 LPM. 5) Dry Gas Meter Assembly. 6) Velocity measuring...
We are offering stack monitoring kit. It is used for rapid and accurate measurements of concentrate gaseous pollutants such as so2, nox and also suspended particulate matter (spm) under isokinetic conditions, volumetric flow, linear velocity and...
stack monitoring kit is designed to measure Temperature, Differential pressure and Static pressure for determination of velocity, volumetric flow and Particulate sampling under Isokinetic conditions. Monitoring of gaseous pollutants such as: Sulphur...
Stack Monitoring Kit Consisting as follows: 1) Temperature Range Ambient to 600°C 2) Set of Inter Connection Hoses Pipes. 3) Double Wall Cold Ice Box. 4) Rotary Van type Vacuum pump Cap. 100 LPM. 5) Dry Gas Meter Assembly. 6) Velocity measuring Kit...
Stack Monitoring Kit – Efficient Emission Monitoring for Industrial Compliance Our Stack Monitoring Kit is advanced emission monitoring equipment designed to provide precise and reliable measurement of emissions from industrial stacks. It ensures...
Stack Sampler Manufacturer in India – KDM Environmental KDM Environmental , headquartered in Delhi, India , is a trusted manufacturer and exporter of Stack Samplers and Stack Emission Monitoring Equipment designed for industrial air pollution...
Stack Monitoring kit can be used to measure total emission of particulate matter and gaseous pollutants from the stacks of almost all types of industries including Thermal Power Stations, Steel Plants, Chemical Plants and Cement Industry. In its...