Write a Review
Our Product / Services
Our product range contains a wide range of Polymer Putty, Stain Block Primer, Water Thinnable Sealer Primer, Zinc Chormate Primer and Satin Enamel
Indigo Stain Block Primer is a water based primer suitable for use on interior / exterior walls and ceilings. It is specially formulated to prevent the migration of stains through the finished paint film. It can easily hide the stains caused by water and solvent based inks, crayons, ball-point pens, coffee, grease, spices and cooking oils, water, and smoke damage.
Surface Preparation & Application:
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as efflorescence, dirt, grease or wax. Where necessary, surfaces should be rubbed down using a suitable abrasive paper and then dusted off. To use, stir thoroughly and apply 1 coat of Stain Block Primer to the stained surfaces without diluting with water and allow to dry for 8 hrs. Two coats are recommended for difficult stains.
Indigo Paints Zinc Chromate Primer is an alkyd based metal primer intended for maintenance applications. It consists of rust inhibitive pigments which protect the metal surface from rust.
Surface Preparation & Application:
Stir contents thoroughly. Clean the surface to be painted by removing all loose particles, grease, dirt, rust etc. Apply Indigo Zinc Chromate Primer using brush or spray after thinning 15-20% with turpentine. Allow the film to dry overnight before applying the topcoat.
Indigo Satin Enamel is an alkyd based enamel that can be applied on diverse surfaces like wood, metal and concrete. It comes with a soft sheen finish. Indigo Satin Enamel offers clean colors and is available in a range of shades. It can also be applied on exterior surfaces.
Surface Preparation & Application:
Wipe the surface clean to make it free from dust, dirt, grease etc. Sand the surface with abrasive paper grit no. 180. Wipe clean and use an appropriate primer to prime the surface. For best results, allow drying time of 6-8 hours. Dents & imperfections can be filled using appropriate fillers which should then be sanded and primed again. One liter of Indigo Satin Enamel can be thinned down with 10-20% of good quality turpentine for brushing consistency or with 20-30% for spraying. Apply two coats giving an interval of 6-8 hours between coats.
Surface Preparation & Application:
Suitable for both interior and exterior use. For priming plastered walls, asbestos, concrete, brickwork, etc. Has excellent sealing properties and good resistance to dampness, efflorescence and alkali. Provides excellent bonding with surface and with topcoat emulsion. Gives very high hiding properties and whiteness. Apply on dry, clean and sound surface. Use one or two coats depending on surface condition. Dry 24 hours before applying finishing paint. Use clean fresh water for thinning.
Indigo Paints (Indigo Paints)
No. 103, Behind Mauli Petrol Pump Baner Road Pune - 411045 Maharashtra
Share us via
