Features:

• ICIR-180D sensor switch can detect the infrared Rays released by human body motion within the Detection area, and then start the load-light automatically.

• This PIR Sensor has an extra feature of manual override. ICIR-180D has a longer detection range and wider angle, it is better for security use.

• Specifications: Rated Voltage: 230V AC 50Hz Load Wattage: Maximum 1000W incandescent bulb or Maximum 300W fluorescent lamp Detection Area: Max. 12 meters Detection Angle: Max. 180 Time-delay: From 105 seconds to 61 minutes adjustable LUX Control Level: From daytime to darkness adjustable Protecti on Class: IP44

Applications:

GarageCorridorsStaircaseNear GateBasementsParking AreaLocker/Safe AreaATM College/School/InstitutesMulti-Apartment ComplexHospital / Nursing HomesMalls and Many More Places

ICIR-250 is a dual purpose motion sensor designed for the control networks based on LonWorks building network technology. This sensor offers different levels of detection algorithms for working with occupancy or intrusion detection.ICIR-250 contains a 3120 neuron chip and FTT-10A free topology transceiver for network connection. In addition to its high reliability, this sensor also provides many network controllable features required by today's intelligent building control systems.

Features:

Occupancy and intrusion dual operationNetwork controllable multi-mode LED indicationNetwork adjustable high-low detection sensitivityNetwork programmable intrusion pulse countNetwork controllable system walk test modeMulti-direction mounting bracket providedSensor housing tamper protectionSensor operation heart beat outputSuperior RFI and EMI immunity

Specifications:

• Power supply: 1036VDC, 926VAC
• Current drain: 40mA @ 24VDC
• Infrared sensor: Dual element, high sensitivity, low noise
• Network: FTT-10A, 78Kbps
• Neuron chip: 3120, 10MHz
• Detection range: 110 wide, 8/15m adjustable
• Mounting height: 1.83.6m
• Pulse count: 1/2/3 network controllable
• Tamper protection: Housing open activation
• Temperature: -20C50C (-4F122F)
• Dimensions: 132 x 72 x 57mm

HEM-550 is the master sensor for HEM-1 Guestroom HVAC Energy Management System. This is not only an occupancy sensor, but also a signal processor of the system. With integration of varioussignals and logic sequence analysis, this sensor is able to verify the actual occupancy status of a room without detecting continued movements of guests.

When guestroom is physically occupied, the HEM-550 will command PP-116 to provide for HVAC operation. After the guestroom is vacant, the HEM-550 will command PP-116 to shut OFF the power for HVAC operation to reduce the energy consumption.

Features:

• High density detection capability
• Selectable relay output format
• High-low temperatures setbacks
• 2 minute restart cycle protection
• Audible and visible test indications
• Superior RFI and EMI immunity
• Occupancy status signal output
• Wall/corner/ceiling mount available
• Additional slave sensor connectivity
• 5 minute door open HVAC shut OFF

• Specifications: Power supply: 24 2VAC/DC Current drain: 20mA standby, 10mA active Relay output: Form C, 24V/dry contact selectable Relay contact: AC: 250V, DC: 30V, 5A resistive load Detection range: 110 wide, 15m @ 25C Detectable speed: 0.13m/sec. Mounting height: 1.83.6m High-temp limit: 30C/28C/26C(85F/82F/79F) Low-temp limit: 15C/13C/11C(59F/55F/51F) Restart cycle: 2 min., can be disabled Test indication: Buzzer and LED, can be disabled RFI immunity: Ave. 20V/m (101000MHz) Humidity: Max. 95% RH Temperature: -10C60C (14F140F) Dimensions: 112 x 66 x 45mm

The ICIR-730D is an occupancy sensor developed for automatic control of HVAC operations. This sensor is designed for recess mounting with the EIA standard single gang box with 83.5mm screw pitch.
An innovative dual delay processor makes this sensor smart enough to verify the nature of occupancies. In addition to the HVAC operation control, this duplex occupancy sensor also provides signal for instant light control. With one installation, the ICIR-730D can offer both HVAC and lighting controls to maximize the benefits of occupancy-oriented building energy management system.

Features:

• Dual element infrared sensor
• Form C HVAC control output
• Instant light control output
• Adjustable LUX level control
• Selectable ON and OFF delays
• Disabled walk test LED
• Superior RFI/EMI immunity
• High density detection zones
• Temperature compensation
• 140 ultra wide angle detection

Specifications:

• Power supply: 24 2VAC/DC
• Current drain: Standby: 8mA, Active: 20mA @ 24VDC
• HVAC control: Form C, 30VAC/DC, 0.2A max.
• Light control: TTL output, standby: 0V, active: 5V
• Detectable speed: 0.13m/sec.
• Mounting height: 1.21.5m
• Delay time (ON): 0/10"/20"/30"/1'/2'/5'/10' selectable
• Delay time (OFF): 10"/30"/1'/3'/5'/10'/20'/30' selectable
• RFI immunity: Ave. 20V/m (101000MHz)
• Humidity: Max. 95% RH
• Temperature: -20C60C (-44F140F)
• Dimensions: 120 x 70 x 50mm

Specifications:

• Rated Voltage: 230V AC 50Hz
• Load Wattage: Max.1500W incandescent bulb or Max. 300W fluorescent lamp
• Detection Area: Max. 5 Meters in radius
• Detection Angle: 360 around
• Time delay: From 10 5 seconds to 4 1 minutes adjustable
• Protection Class: IP 20

Features:

• Stand alone220V AC operation Room
• Can switchlightload of up to 300 Watts
• DetectionRange5m in radius
• Lux Level Control & Time control
• Re-trigger Function

Applications:

• Offices / Conference
• Toilets
• Pantry
• Stores / Stairways
• Lifts / Lift Lobby
• Dining Area / Canteen
• Basement / Covered Parking Area
• Locker /Safe Room in banks/ Vaults
• ATMs - Colleges/ Schools/ Institutes
• Multi- Apartment Complexes
• Hospitals /Nursing Homes
• Malls And many more places!

Features:

• ICIR-250A (Ceiling Light with PIR Sensor) can detect the infrared rays released by human motion within the detection area, and then start the in built load -light automatically.
• The unit is for indoor use only.
• ICIR-250A is the ceiling lamp, it is IP20 waterproof class.
• The customers usually install this sensor in the living room, restroom, corridor, and verandah.

Specifications:

• Rated Voltage: 230V AC 50Hz
• Load Wattage: Maximum 2x25Watt incandescent bulb or Maximum 2x9Watt fluorescent lamps
• Detection Area: Max. 4 meters in radius
• Detection Angle: Max. 360 around
• Time-delay: From 105 seconds to 41 minutes adjustable
• LUX Control Level: From daytime to darkness adjustable
• Protection Class: IP20

Applications:

Living room / Rest RoomCorridor / verandaLifts / lift lobby / ATMsHospitals / Nursing Homes

Features:

• ICIR-180D sensor switch can detect the infrared Rays released by human body motion within the Detection area, and then start the load-light automatically.

• This PIR Sensor has an extra feature of manual override. ICIR-180D has a longer detection range and wider angle, it is better for security use.

• Specifications: Rated Voltage: 230V AC 50Hz Load Wattage: Maximum 1000W incandescent bulb or Maximum 300W fluorescent lamp Detection Area: Max. 12 meters Detection Angle: Max. 180 Time-delay: From 105 seconds to 61 minutes adjustable LUX Control Level: From daytime to darkness adjustable Protecti on Class: IP44

Applications:

GarageCorridorsStaircaseNear GateBasementsParking AreaLocker/Safe AreaATM College/School/InstitutesMulti-Apartment ComplexHospital / Nursing HomesMalls and Many More Places

ICIR-250 is a dual purpose motion sensor designed for the control networks based on LonWorks building network technology. This sensor offers different levels of detection algorithms for working with occupancy or intrusion detection.ICIR-250 contains a 3120 neuron chip and FTT-10A free topology transceiver for network connection. In addition to its high reliability, this sensor also provides many network controllable features required by today's intelligent building control systems.

Features:

Occupancy and intrusion dual operationNetwork controllable multi-mode LED indicationNetwork adjustable high-low detection sensitivityNetwork programmable intrusion pulse countNetwork controllable system walk test modeMulti-direction mounting bracket providedSensor housing tamper protectionSensor operation heart beat outputSuperior RFI and EMI immunity

Specifications:

• Power supply: 1036VDC, 926VAC
• Current drain: 40mA @ 24VDC
• Infrared sensor: Dual element, high sensitivity, low noise
• Network: FTT-10A, 78Kbps
• Neuron chip: 3120, 10MHz
• Detection range: 110 wide, 8/15m adjustable
• Mounting height: 1.83.6m
• Pulse count: 1/2/3 network controllable
• Tamper protection: Housing open activation
• Temperature: -20C50C (-4F122F)
• Dimensions: 132 x 72 x 57mm

HEM-550 is the master sensor for HEM-1 Guestroom HVAC Energy Management System. This is not only an occupancy sensor, but also a signal processor of the system. With integration of varioussignals and logic sequence analysis, this sensor is able to verify the actual occupancy status of a room without detecting continued movements of guests.

When guestroom is physically occupied, the HEM-550 will command PP-116 to provide for HVAC operation. After the guestroom is vacant, the HEM-550 will command PP-116 to shut OFF the power for HVAC operation to reduce the energy consumption.

Features:

• High density detection capability
• Selectable relay output format
• High-low temperatures setbacks
• 2 minute restart cycle protection
• Audible and visible test indications
• Superior RFI and EMI immunity
• Occupancy status signal output
• Wall/corner/ceiling mount available
• Additional slave sensor connectivity
• 5 minute door open HVAC shut OFF

• Specifications: Power supply: 24 2VAC/DC Current drain: 20mA standby, 10mA active Relay output: Form C, 24V/dry contact selectable Relay contact: AC: 250V, DC: 30V, 5A resistive load Detection range: 110 wide, 15m @ 25C Detectable speed: 0.13m/sec. Mounting height: 1.83.6m High-temp limit: 30C/28C/26C(85F/82F/79F) Low-temp limit: 15C/13C/11C(59F/55F/51F) Restart cycle: 2 min., can be disabled Test indication: Buzzer and LED, can be disabled RFI immunity: Ave. 20V/m (101000MHz) Humidity: Max. 95% RH Temperature: -10C60C (14F140F) Dimensions: 112 x 66 x 45mm

The ICIR-730D is an occupancy sensor developed for automatic control of HVAC operations. This sensor is designed for recess mounting with the EIA standard single gang box with 83.5mm screw pitch.
An innovative dual delay processor makes this sensor smart enough to verify the nature of occupancies. In addition to the HVAC operation control, this duplex occupancy sensor also provides signal for instant light control. With one installation, the ICIR-730D can offer both HVAC and lighting controls to maximize the benefits of occupancy-oriented building energy management system.

Features:

• Dual element infrared sensor
• Form C HVAC control output
• Instant light control output
• Adjustable LUX level control
• Selectable ON and OFF delays
• Disabled walk test LED
• Superior RFI/EMI immunity
• High density detection zones
• Temperature compensation
• 140 ultra wide angle detection

Specifications:

• Power supply: 24 2VAC/DC
• Current drain: Standby: 8mA, Active: 20mA @ 24VDC
• HVAC control: Form C, 30VAC/DC, 0.2A max.
• Light control: TTL output, standby: 0V, active: 5V
• Detectable speed: 0.13m/sec.
• Mounting height: 1.21.5m
• Delay time (ON): 0/10"/20"/30"/1'/2'/5'/10' selectable
• Delay time (OFF): 10"/30"/1'/3'/5'/10'/20'/30' selectable
• RFI immunity: Ave. 20V/m (101000MHz)
• Humidity: Max. 95% RH
• Temperature: -20C60C (-44F140F)
• Dimensions: 120 x 70 x 50mm

Specifications:

• Rated Voltage: 230V AC 50Hz
• Load Wattage: Max.1500W incandescent bulb or Max. 300W fluorescent lamp
• Detection Area: Max. 5 Meters in radius
• Detection Angle: 360 around
• Time delay: From 10 5 seconds to 4 1 minutes adjustable
• Protection Class: IP 20

Features:

• Stand alone220V AC operation Room
• Can switchlightload of up to 300 Watts
• DetectionRange5m in radius
• Lux Level Control & Time control
• Re-trigger Function

Applications:

• Offices / Conference
• Toilets
• Pantry
• Stores / Stairways
• Lifts / Lift Lobby
• Dining Area / Canteen
• Basement / Covered Parking Area
• Locker /Safe Room in banks/ Vaults
• ATMs - Colleges/ Schools/ Institutes
• Multi- Apartment Complexes
• Hospitals /Nursing Homes
• Malls And many more places!

Features:

• ICIR-250A (Ceiling Light with PIR Sensor) can detect the infrared rays released by human motion within the detection area, and then start the in built load -light automatically.
• The unit is for indoor use only.
• ICIR-250A is the ceiling lamp, it is IP20 waterproof class.
• The customers usually install this sensor in the living room, restroom, corridor, and verandah.

Specifications:

• Rated Voltage: 230V AC 50Hz
• Load Wattage: Maximum 2x25Watt incandescent bulb or Maximum 2x9Watt fluorescent lamps
• Detection Area: Max. 4 meters in radius
• Detection Angle: Max. 360 around
• Time-delay: From 105 seconds to 41 minutes adjustable
• LUX Control Level: From daytime to darkness adjustable
• Protection Class: IP20

Applications:

Living room / Rest RoomCorridor / verandaLifts / lift lobby / ATMsHospitals / Nursing Homes