Autoclaves #3438387

Features

• Backed with 56 years of service to science and our expertise in steam pressure sterilization autoclaves. Our Top Loading PRO Series Autoclaves are the ideal companion for the modern microbiologists and institutes, pharma companies, hospitals etc.
• Leakproof silicon gasket
• Over pressure safety
• Safe and sturdy chamber manufactured from Stainless Steel (SS-304)
• Low water level cut off for safety of heating elements.
• Independent safety for over temperature protection.
• Saves Power bills by upto 30%
• Heat cured epoxy coating on steel exterior OR Stainless Steel exterior (as ordered).
• Electrical on/off safety switch
• Easy draining of chamber
• Easy portability and placement and movement

Usage Portability

1. Single lever locking of lid for faster operations.
2. Heater and pressure interlock for lid lock safety.
3. Effortless lifting of lid with assisted spring push back support
4. Accurate temperature control with user level flexibility. Display process and set values simultaneously.
5. Microprocessor Based Fully Automatic Fuzzy Logic Control System with Alphanumeric Digital backlit LCD display.
6. Automatic Steam purging and exhaust
7. Fitted with AUTOMATIC DIGITAL MINUTE TIMER which starts automatically when set/desired value of temperature is achieved. When the set time period is over the heaters get switched off automatically with alarm for cycle end.
8. With LCD display data logger with REAL TIME, DATE, TIME etc directly on PC (SOFTWARE OPTIONAL) or direct on DOT MATRIX PRINTER.

Option

• G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope)
• P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope)
• Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra)
• Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
• TFT Touch Screen Display Controller in lieu of LCD display.
• Vacuum Pulsing thru a vacuum pump.
• Circular Chart Recorder to cost extra (for Temperature)
• Circular Chart Recorder to cost extra (for Temperature and Pressure)
• Spare Silicon Gasket to cost extra.
• Spare Heater to cost extra.

Features:

• MAC Vertical Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms
• An Ideal tool for Laboratories, hospitals, nursing homes, R & D labs, etc.
• Inner made of Stainless Steel and outer made of Mild Steel duly painted.
• Supporting Ring & Legs are made up of mild steel.
• Heaters cover stand and bucket are made of Stainless Steel Sheet.
• Lid is made of thick machined Mild Steel plate lined with stainless steel from inside
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• Fitted with neoprene rubber gasket.
• All internal joints are argon arc welded.
• Operating range from 15psi to 20 psi pressure.
• Pressure Control Switch/Pressure Cut Off (*PCO) device. (Option)
• Low water Level Cut Off (*WCO) device for safety of heating element. (Option)
• To work on 220/230Volts, 50/60 Hz AC supply.

Options:

• Spare heater
• Spare silicon gasket

Features:

• MAC Semi-Automatic Digital Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
• These are semi-automatic models requiring tighter control of temperature and sterilizing time, thus eliminating any chances of under or overexposure of media/ samples with respect to temperature and hold time.
• Inner made of Stainless Steel and outer made of Mild Steel duly painted.
• Supporting Ring & Legs are made up of mild steel.
• Heaters cover stand and carrier/bucket are made of Stainless Steel.
• Lid is made of thick machined Mild Steel plate lined with stainless steel from inside
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• Fitted with neoprene rubber gasket.
• All internal joints are argon arc welded.
• µProcessor based Controller with time and temperature settable by the user.
• Operating range from 15 to 22 psi pressure. (adjustable)
• Class ‘A’ Platinum (Pt-100) sensor, enabling precise and accurate monitoring in 0.1OC resolution and + 1OC accuracy.
• End of cycle buzzer to alert the user.
• Miniature Circuit Breaker for MAINS On/Off plus the safety of control panel.
• Industrial grade energy efficient heaters reduce power bills drastically.
• Fitted with low water cut-off for the general safety of heating elements.
• To work on 220/230Volts, 50/60 Hz AC supply.

Options:

• SPARE HEATER
• SPARE SILICON GASKET

Features:

• MAC Fully Automatic Vertical Autoclave is most ideal for critical applications requiring assured and reliable destruction of all living micro-organisms.
• These are fully automatic models requiring no human intervention till a full sterilization cycle is over.
• An Ideal tool for Laboratories, hospitals, nursing homes, R & D labs, etc.
• Inner made of Stainless Steel and outer made of Mild Steel duly painted.
• Supporting Ring & Legs are made up of mild steel.
• Heaters cover stand and bucket are made of Stainless Steel Sheet.
• Lid is made of thick machined Mild Steel plate lined with stainless steel from inside
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• Fitted with neoprene rubber gasket.
• All internal joints are argon arc welded.
• µProcessor based Controller with time and temperature programmable by the user.
• Class ‘A’ Platinum (Pt-100) sensor, enabling precise and accurate monitoring.
• Low water level alarm and cut off for the safety of heater.
• Sensor open alarm and display.
• End of cycle buzzer to alert the user and auto reset.
• Miniature Circuit Breaker for MAINS On/Off plus the safety of control panel.
• Fitted with a low-water level cut-off device.
• Solenoid Valve for automatic purging and exhaust (user settable).
• Industrial grade energy efficient heaters reduce power bills drastically.

Options:

• SPARE HEATER
• SPARE SILICON GASKET

Features:

• “MAC” Vertical Autoclaves are most ideal for all applications requiring, routine total destruction of all living micro-organisms
• An Ideal tool for Laboratories, hospitals, nursing homes, R & D labs etc.
• Heaters cover stand and carrier/bucket are made of Stainless Steel.
• Specially designed system for dry sterilization processes, the system is a triple walled unit with inner chamber, jacked and outer wall made of Stainless Steel.
• Lid made of Stainless Steel is closed through a RADIAL LOCKING ARRANGEMENT.
• The chamber is leak proof and all joints are duly argon arc welded.
• Mounted on mild steel support legs.
• The system is supplied without basket and without dressing drum, however the same are available at extra cost.
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• All internal joints are argon arc welded, ground and polished to give crevice free internals.
• Operating range from 15 to 20 psi pressure (adjustable).
• Industrial grade energy efficient heaters reduce power bills drastically.
• To work on 220/230Volts, 50/60 Hz AC supply.

Option:

• G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope)
• P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope)
• Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra)
• Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
• TFT Touch Screen Display Controller in lieu of LCD display.
• Vacuum Pulsing thru a vacuum pump.
• Spare Silicon Gasket to cost extra.
• Spare Heater to cost extra.

Features:

• MAC Horizontal Triple Walled Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
• All ideal tool for Laboratories, hospitals, nursing home, R&D labs, etc.
• The inner chamber, steam jacket, outer chamber, and boiler are made of heavy gauge stainless steel with leak-proof argon arc welding.
• Lid is made of thick machined Mild Steel plate lined with stainless steel from inside
• The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.
• Hydraulically tested to withstand 2.5 times the working pressure.
• Steam boiler is fitted with water level indicator, pressure gauge, low water cut-off device, and automatic pressure control device.
• Fitted with safety valve as a safety device.
• Drain valve is fitted at the side bottom for easy draining/cleaning.
• The unit is provided with a positive self-locking safety door which cannot be opened while the chamber is under pressure and disengages automatically when the chamber is exhausted.
• This affords complete safety to the working personnel against the explosive opening.
• Two separate valves are provided for evacuating steam from inner chamber and jackets as and when desired.
• Sterilization Cycle is controlled by SINGLE POINT Multiport Valve.
• The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.
• An automatic vacuum breaker is fitted to all “MAC” units as a standard accessory, in order to break vacuum in case of steam condensation.
• The flanged immersion-type heating element made from very high-grade material provides the fast formation of pressure in the system and are protected through an electric low water level cut-off device.
• All “MAC” Sterilizers are provided with triple safety features, through a “PIEZOSTAT” (Automatic Pressure Control System) and a spring-loaded safety valve fitted to the boiler/steam generator. The chamber is fitted with spring-loaded safety valve and a dead weight release valve.
• Highly accurate temperature indicator is fitted for monitoring temperature.
• To work on 440Volts, 3phase, 50Hz AC supply.

Options:

• G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope)
• P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope).
• Digital Temperature Controller with timer can be fixed at an extra cost. Once the temperature is attained it will automatically start the timer. It raises on alarm at a set time, so that operator is alerted & he can perform balance operations.
• Automatic water feed system can be incorporated in the boiler, so that at higher level is switched off the water pump and restart is at lower level automatically.
• Digital Pressure & Compound gauges can be provided in lieu of analog gauges.
• Vacuum pulsing through a closed coupled water ring high vacuum pump for creating forced vacuum and fast drying process.
• TFT Touch Screen Display Controller in lieu of LCD Display.
• Multipoint Temperature/Pressure Scanner with LCD display and CENTRONIC port for printer. Total 8 scanning points with five for temperature and one for pressure. Supplied complete with 7 Nos. RTD probes and one pressure transmitter sensor.
• Double door for any of the above models to cost extra.
• Spare Silicon Gasket to cost extra.
• Spare Silicon Gasket to cost extra.
• Circular chart recorder to cost extra (for Temperature only).
• Circular chart recorder to cost extra (for Temperature and Pressure only).

Features:

• MAC Horizontal Triple Walled Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.


• All ideal tool for Laboratories, hospitals, nursing home, R&D labs, etc.


• The inner chamber, steam jacket, outer chamber, and boiler are made of heavy gauge stainless steel with leak-proof argon arc welding.


• Lid is made of thick machined Mild Steel plate lined with stainless steel from inside


• The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.


• Hydraulically tested to withstand 2.5 times the working pressure.


• Steam boiler is fitted with water level indicator, pressure gauge, low water cut-off device, and automatic pressure control device.


• Fitted with safety valve as a safety device.


• Drain valve is fitted at the side bottom for easy draining/cleaning.


• The unit is provided with a positive self-locking safety door which cannot be opened while the chamber is under pressure and disengages automatically when the chamber is exhausted.


• This affords complete safety to the working personnel against the explosive opening.


• Two separate valves are provided for evacuating steam from inner chamber and jackets as and when desired.


• Sterilization Cycle is controlled by SINGLE POINT Multiport Valve.


• The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.


• An automatic vacuum breaker is fitted to all MAC units as a standard accessory, in order to break vacuum in case of steam condensation.


• The flanged immersion-type heating element made from very high-grade material provides the fast formation of pressure in the system and are protected through an electric low water level cut-off device.


• All MAC Sterilizers are provided with triple safety features, through a PIEZOSTAT (Automatic Pressure Control System) and a spring-loaded safety valve fitted to the boiler/steam generator. The chamber is fitted with spring-loaded safety valve and a dead weight release valve.


• To work on 440Volts, 3phase, 50Hz AC supply.

Options:

• G-LOG Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope)


• P-LOG Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope).


• Digital Temperature Controller with timer can be fixed at an extra cost. Once the temperature is attained it will automatically start the timer. It raises on alarm at a set time, so that operator is alerted & he can perform balance operations.


• Automatic water feed system can be incorporated in the boiler, so that at higher level is switched off the water pump and restart is at lower level automatically.


• Digital Pressure & Compound gauges can be provided in lieu of analog gauges.


• Vacuum pulsing through a closed coupled water ring high vacuum pump for creating forced vacuum and fast drying process.


• TFT Touch Screen Display Controller in lieu of LCD Display.


• Multipoint Temperature/Pressure Scanner with LCD display and CENTRONIC port for printer. Total 8 scanning points with five for temperature and one for pressure. Supplied complete with 7 Nos. RTD probes and one pressure transmitter sensor.


• Double door for any of the above models to cost extra.


• Spare Silicon Gasket to cost extra.


• Spare Silicon Gasket to cost extra.


• Circular chart recorder to cost extra (for Temperature only).


• Circular chart recorder to cost extra (for Temperature and Pressure only).

Features:

• MAC Sterilizers are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.


• Inner Chamber is made up of thick non-magnetic steel of 304 quality and jacket is made out of rolled steel.


• Single door made of rolled steel lined with S.S. sheets has radial locking system.


• The space between outer cover made of thick rolled steel sheet and the steam jacket is filled with asbestos sheet or glass wool to minimize thermal losses.


• Boiler is made of thick stainless steel sheet and is located under the sterilizer.


• Unit is fitted with water level indicator, safety valve, pressure gauge, water inlet and drain valves.


• Unit is also fitted with low-water level cut-off device and automatic pressure control device.


• All MAC rectangular sterilizes are fitted with SELF LOCKING SAFETY DOOR device.


• The door cannot be opened when chamber is under pressure.


• Two separate valves are provided for evacuating steam from inner chamber and jacket, as and when desired.


• Fitted with safety valve as a safety device.


• Drain valve is fitted at the side bottom for easy draining/cleaning.


• Fitted with vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation.


• Triple Walled with Steam Jacket and Separate Boiler. Sterilization cycle is controlled by Multiport Valve. The unit is fitted with all standard accessories.


• To work on 440 volts, 3 Phase, A.C. Supply.

Options:

• G-LOG Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope).


• P-LOG Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope).


• Digital Temperature Controller with timer can be fixed at an extra cost. Once the temperature is attained it will automatically start the timer. It raises on alarm at a set time, so that operator is alerted & he can perform balance operations.


• Automatic water feed system can be incorporated in the boiler, so that at higher level is switched off the water pump and restart is at lower level automatically.


• Digital Pressure & Compound gauges can be provided in lieu of analog gauges.


• Vacuum pulsing through a closed coupled water ring high vacuum pump for creating forced vacuum and fast drying process.


• TFT Touch Screen Display Controller in lieu of LCD Display.


• Multipoint Temperature/Pressure Scanner with LCD display and CENTRONIC port for printer. Total 8 scanning points with five for temperature and one for pressure. Supplied complete with 7 Nos. RTD probes and one pressure transmitter sensor.


• Double door for any of the above models to cost extra.


• Circular chart recorder to cost extra (for Temperature only).


• Circular chart recorder to cost extra (for Temperature and Pressure only).

Features:

• Our portable Autoclaves are most ideal for doctors, nursing homes, laboratories, dentists, etc.


• Most ideal for general laboratory requirement where samples in small batches are required to be sterilized.


• Hydraulically tested up to 40psi for user safety.


• Spring-loaded safety valve for pressure adjustment and a dead weight valve works as a safety device.


• Economy at your fingertips with low power consumptions.


• A seamless (joint less) body for single-walled units provides a sturdy and safe operation for the user.


• Low sterilization process time accounts for a higher number of batches accounting for the economy and faster results.


• Body, lid & heater cover made of Single-Walled Stainless Steel (SS-304).


• Simple and easy Press & turn system of the closing lid for single-walled units.


• Lid is fitted with Pressure Gauge, Safety Valve, Manual Exhaust Valve.


• Vacuum breaker-cum-purge valve works as a safety device.


• Moulded neoprene rubber gasket.


• Heater cover stand made of stainless steel (SS-304)


• Industrial grade energy efficient heaters reduce power bills drastically

Features:

• Outer body made of CRC sheet duly powder coated.


• Inner cylinder is made of heavy gauge welded Stainless Steel Sheet.


• Lid is made of thick Stainless Steel plate.


• Lid is closed through nut locking arrangement.


• Working Pressure range up to 300 psi (21 1kg/cm).


• Temperature range up to 215C.


• Highly accurate and reliable RTD (Pt-100) sensor for accurate temperature control.


• User settable Digital Temperature Indicator cum Controller is fitted for automatic control with respect to time and temperature.


• User settable in-built digital buzzer timer in minutes for automatic control of sterilization time.


• Manual purging (exhaust of pressure) at cycle end, on the sound of the audio buzzer.


• Fitted with a safety valve as a safety device.


• Fitted with a vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation.


• Fitted with Automatic Pressure Control Switch for double safety, in case Digital Temperature Controller fails.


• Provided with double safety valve protection.


• Fitted with a reliable pressure gauge.

Features:

• Corrosion resistance, non-spill of hazardous substance, reduce pollution, safety for using.


• High and uniform temperature boost helps in quick and easy dissolution of samples containing volatile elements which are difficult to dissolve under normal conditions


• Beautiful appearance reasonable structure, easy operation and shorten the analysis time, with reliable data


• Contains double care Teflon bush prevents spillage and leakage and thus can contain corrosive acids or alkaline test samples


• Easily replaces platinum crucible and helps in solving analysis of trace elements

Features:

• Corrosion resistance, non-spill of hazardous substance, reduce pollution, safety for using.


• High and uniform temperature boost helps in quick and easy dissolution of samples containing volatile elements which are difficult to dissolve under normal conditions.


• Beautiful appearance reasonable structure, easy operation and shorten the analysis time, with reliable data.


• Contains double care Teflon bush prevents spillage and leakage and thus can contain corrosive acids or alkaline test samples.


• Easily replaces platinum crucible and helps in solving analysis of trace elements.

Features:

• Backed with 56 years of service to science and our expertise in steam pressure sterilization autoclaves. Our Top Loading PRO Series Autoclaves are the ideal companion for the modern microbiologists and institutes, pharma companies, hospitals etc.
• Leakproof silicon gasket
• Over pressure safety
• Safe and sturdy chamber manufactured from Stainless Steel (SS-304)
• Low water level cut off for safety of heating elements.
• Independent safety for over temperature protection.
• Saves Power bills by upto 30%
• Outer body mild steel OR Stainless Steel SS-304. (as ordered).
• Electrical on/off safety switch
• Easy draining of chamber
• Easy portability and placement and movement

Usage Portability

• Single lever locking of lid for faster operations.
• Heater and pressure interlock for lid lock safety.
• Effortless lifting of lid with assisted spring push back support
• Accurate temperature control with user level flexibility. Display process and set values simultaneously.
• Microprocessor Based Fully Automatic Fuzzy Logic Control System with Alphanumeric Digital backlit LCD display.
• Automatic Steam purging and exhaust
• Fitted with AUTOMATIC DIGITAL MINUTE TIMER which starts automatically when set/desired value of temperature is achieved. When the set time period is over the heaters get switched off automatically with alarm for cycle end.

Option

• G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope)
• P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope)
• Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra)
• Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
• TFT Touch Screen Display Controller in lieu of LCD display.
• Vacuum Pulsing thru a vacuum pump.
• Circular Chart Recorder to cost extra (for Temperature)
• Circular Chart Recorder to cost extra (for Temperature and Pressure)
• Spare Silicon Gasket to cost extra.
• Spare Heater to cost extra.

Features:

• MAC Vertical Autoclaves are most ideal for all applications requiring, routine total destruction of all living micro-organisms.
• An Ideal tool for Laboratories, hospitals, nursing homes, R & D labs etc.
• Inner chamber are made of Stainless Steel (SS-304 grade).
• Outer body are made of Stainless Steel.
• Heaters cover stand and carrier/bucket are made of Stainless Steel.
• Lid made of thick machined Stainless Steel plate.
• Radial arms are made of mild steel.
• Legs are made of mild steel.
• Rings are made of Stainless Steel.
• With radial locking system.
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• Moulded jointless silicon rubber gasket.
• All internal joints are argon arc welded, ground and polished to give crevice free internals.
• Operating range from 15 to 20 psi pressure (adjustable).
• Industrial grade energy efficient heaters reduce power bills drastically.
• Pressure Control Switch/Pressure Cut Off (*PCO) device.
• Low water Level Cut Off (*WCO) device for safety of heating element.
• To work on 220/230Volts, 50/60 Hz AC supply.

Optional

• G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
• P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
• Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra) (FOR DIGITAL MODEL ONLY)
• Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
• Spare Silicon Gasket to cost extra.
• Spare Heater to cost extra.
• TFT Touch Screen Display Controller in lieu of LCD display.
• Circular chart recorder to cost extra (for Temperature only)
• Circular chart recorder to cost extra (for Temperature and Pressure only)

Features:

• MAC Semi Automatic Digital Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
• These are semi automatic models requiring tighter control of temperature and sterilizing time, thus eliminating any chances of under or over exposure of media/ samples with respect to temperature and hold time.
• Inner chamber is made of Stainless Steel (SS-304 grade).
• Outer body is made of Stainless Steel.
• Heaters cover stand and carrier/bucket are made of Stainless Steel.
• Lid made of thick machined Stainless Steel plate.
• Radial locking lid ensures user safety and safe locking.
• Radial arms are made of mild steel.
• Legs are made of mild steel.
• Rings & legs are made of mild steel.
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, extra Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• Moulded jointless silicon rubber gasket.
• All internal joints are argon arc welded, ground and polished to give crevice free internals.
• µProcessor based Controller with time and temperature settable by user.
• Operating range from 15 to 22 psi pressure. (adjustable)
• Class ‘A’ Platinum (Pt-100) sensor, enabling precise and accurate monitoring in 0.1°C resolution and ±1°C accuracy.
• End of cycle buzzer to alert the user.
• Miniature Circuit Breaker for MAINS On/Off plus safety of control panel.
• Industrial grade energy efficient heaters reduce power bills drastically.
• Fitted with low water cut-off for general safety of heating elements.
• To work on 220/230Volts, 50/60 Hz AC supply.

Optional

• G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
• P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
• Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra) (FOR DIGITAL MODEL ONLY)
• Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
• Spare Silicon Gasket to cost extra.
• Spare Heater to cost extra.
• TFT Touch Screen Display Controller in lieu of LCD display.
• Circular chart recorder to cost extra (for Temperature only)
• Circular chart recorder to cost extra (for Temperature and Pressure only)

Features:

• MAC Fully Automatic Vertical Autoclave are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
• These are fully automatic models requiring no human intervention till a full sterilization cycle is over.
• Inner chamber are made of Stainless Steel (SS-304 grade).
• Outer body are made of Stainless Steel.
• Heaters cover stand and carrier/bucket are made of Stainless Steel.
• Lid made of thick machined Stainless Steel plate.
• Radial locking lid ensures user safety and safe locking.
• Radial arms are made of mild steel.
• Legs are made of mild steel.
• Rings are made of Stainless Steel.
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, extra Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• Moulded jointless silicon rubber gasket.
• All internal joints are argon arc welded, ground and polished to give crevice free internals.
• µProcessor based Controller with time and temperature programmable by user.
• Class ‘A’ Platinum (Pt-100) sensor, enabling precise and accurate monitoring.
• Low water level alarm and cut off for safety of heater.
• Sensor open alarm and display.
• End of cycle buzzer to alert the user and auto reset.
• Miniature Circuit Breaker for MAINS On/Off plus safety of control panel.
• Fitted with low-water level cut-off device.
• Solenoid Valve for automatic purging and exhaust (user settable).
• Industrial grade energy efficient heaters reduce power bills drastically.
• To work on 220/230Volts, 50/60 Hz AC supply.

Optional

• G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
• P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
• Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra) (FOR DIGITAL MODEL ONLY)
• Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
• Spare Silicon Gasket to cost extra.
• Spare Heater to cost extra.
• TFT Touch Screen Display Controller in lieu of LCD display.
• Circular chart recorder to cost extra (for Temperature only)
• Circular chart recorder to cost extra (for Temperature and Pressure only)

Features:

• Backed with 56 years of service to science and our expertise in steam pressure sterilization autoclaves. Our Top Loading PRO Series Autoclaves are the ideal companion for the modern microbiologists and institutes, pharma companies, hospitals etc.
• Ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
• Leakproof silicon gasket
• Over pressure safety
• Safe and sturdy chamber manufactured from Stainless Steel (SS-304)
• Low water level cut off for safety of heating elements.
• Independent safety for over temperature protection.
• Saves Power bills by upto 30%
• Heat cured epoxy coating on steel exterior OR Stainless Steel exterior (as ordered).
• Single lever locking of lid for faster operations.
• Heater and pressure interlock for lid lock safety.
• Effortless lifting of lid with assisted spring push back support
• Automatic Steam purging and exhaust
• Accurate temperature control with user level flexibility.
• Display process and set values simultaneously.
• Electrical on/off safety switch
• Easy draining of chamber
• Easy portability and placement and movement
• At the heart of our PROPLUS series is the touch screen graphical Programmable Logic Controller which delivers exceptional management with progressive notifications.
• Recording of operation parameter: Each autoclave has a TFT (TOUCH SCREEN) HMI AND PLC (PROGRAMMABLE LOGIC CONTROL) integrated unit with graphic devices which will automatically and continuously monitor and record dates, time of day, load identification number and operating parameters throughout the entire length of the autoclave cycle and all data can be transferred via EPROM port by simply inserting a pen drive, which can easily by transferred to any PC/Desktop.
• Touchscreen PLC for accurate temperature control (control on all temperature channels), built in recipes, power failure restore and password protection upto 3 levels.
• User settable alphanumeric batch number and operator name
• Built-in six sterilizing modes
• Power failure restore
• 3 Level password protection
• User settable alphanumeric batch no. with operator
• Auto purging and exhaust
• Offline PC connectivity
• Service and Calibration reminders
• Dual pressure scales in psi and kPA
• Printing in smart tabular format with date, time, batch number, operator name and status
• Enables authentic documenting of every Autoclave cycle (ON PEN DRIVE)

Options:

• G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope)
• P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope)
• Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra)
• Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
• TFT Touch Screen Display Controller in lieu of LCD display.
• Vacuum Pulsing thru a vacuum pump.
• Circular Chart Recorder to cost extra (for Temperature)
• Circular Chart Recorder to cost extra (for Temperature and Pressure)
• Spare Silicon Gasket to cost extra.
• Spare Heater to cost extra.

Features:

• MAC Fully Automatic Vertical Autoclave are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
• These are fully automatic models requiring no human intervention till a full sterilization cycle is over.
• Inner chamber are made of Stainless Steel (SS-304 grade).
• Outer body are made of Steel.
• Heaters cover stand and carrier/bucket are made of Stainless Steel.
• Lid made of thick machined Stainless Steel plate.
• Radial locking lid ensures user safety and safe locking.
• Radial arms are made of mild steel.
• Rings & legs are made of mild steel.
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, extra Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• Moulded jointless silicon rubber gasket.
• All internal joints are argon arc welded, ground and polished to give crevice free internals.
• µProcessor based Controller with time and temperature programmable by user.
• Class ‘A’ Platinum (Pt-100) sensor, enabling precise and accurate monitoring.
• Low water level alarm and cut off for safety of heater.
• Sensor open alarm and display.
• End of cycle buzzer to alert the user and auto reset.
• Miniature Circuit Breaker for MAINS On/Off plus safety of control panel.
• Fitted with low-water level cut-off device.
• Solenoid Valve for automatic purging and exhaust (user settable).
• Industrial grade energy efficient heaters reduce power bills drastically.
• To work on 220/230Volts, 50/60 Hz AC supply.

Optional

• G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
• P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
• Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra) (FOR DIGITAL MODEL ONLY)
• Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
• Spare Silicon Gasket to cost extra.
• Spare Heater to cost extra.
• TFT Touch Screen Display Controller in lieu of LCD display.
• Circular chart recorder to cost extra (for Temperature only)
• Circular chart recorder to cost extra (for Temperature and Pressure only)

Features:

• Fully Automatic Table Top Front Loading Autoclave for sterilization upto 134C.


• Designed fully in accordance with international standards.


• Front Loading Table Top units are fully automatic high-speed sterilizers.


• Essentially for reducing sterilizing cycle time. (A 20 minute cycle time at 121C takes only 7 minutes at 134C).


• Digitally microprocessor controlled fully automatic systems enable reliable, rapid and total destruction of living microorganisms.


• Enables hassle-free operations of sterilizing process, exhaust and drying processes.


• Single lever effortless swing operation of the lid for easy closure.


• All systems fitted with built-in water reservoir and drying process.


• Fitted with AUTOMATIC DIGITAL MINUTE TIMER which starts automatically when set/desired value of temperature is achieved.


• When the set time period is over the heaters get switched off automatically with alarm for cycle end.


• Automatic Purging & Exhaust (User Settable).


• Operable sterilizing temperature range up to 134C with user-defined sterilizing time in minutes.


• Inner chamber made of Stainless Steel (SS-304).


• Outer body made of moulded rigid plastic or CRC sheet duly powder coated.


• Dual scale vacuum gauge with psi kPA and color-coded temperature display.


• Separate valves for water filling and exhaust of steam.


• To work on 220/230 Volts AC Supply.

Features:

• Fully Automatic Table Top Front Loading Autoclave for sterilization upto 134C.


• Designed fully in accordance with international standards.


• Front Loading Table Top units are fully automatic high-speed sterilizers.


• Essentially for reducing sterilizing cycle time. (A 20 minute cycle time at 121C takes only 7 minutes at 134C).


• Digitally microprocessor controlled fully automatic systems enable reliable, rapid and total destruction of living microorganisms.


• Enables hassle-free operations of sterilizing process, exhaust and drying processes.


• Single lever effortless swing operation of the lid for easy closure.


• All systems fitted with built-in water reservoir and drying process.


• Fitted with AUTOMATIC DIGITAL MINUTE TIMER which starts automatically when set/desired value of temperature is achieved.


• When the set time period is over the heaters get switched off automatically with alarm for cycle end.


• Automatic Purging & Exhaust (User Settable).


• Operable sterilizing temperature range up to 134C with user-defined sterilizing time in minutes.


• Inner chamber made of Stainless Steel (SS-304).


• Outer body made of moulded rigid plastic or CRC sheet duly powder coated.


• Dual scale vacuum gauge with psi kPA and color-coded temperature display.


• Separate valves for water filling and exhaust of steam.


• Fitted with High Capacity heavy duty Vacuum Pump for dry sterilization.


• To work on 220/230 Volts AC Supply.

Features:

• MAC Vertical Autoclaves are most ideal for all applications requiring, routine total destruction of all living micro-organisms
• An Ideal tool for Laboratories, hospitals, nursing homes, R & D labs etc.
• Inner chamber are made of Stainless Steel (SS-304 grade).
• Outer body are made of Steel.
• Heaters cover stand and carrier/bucket are made of Stainless Steel.
• Lid made of thick machined Stainless Steel plate.
• Radial arms are made of mild steel.
• Rings & legs are made of mild steel.
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• Moulded jointless silicon rubber gasket.
• All internal joints are argon arc welded, ground and polished to give crevice free internals.
• Operating range from 15 to 20 psi pressure (adjustable).
• Industrial grade energy efficient heaters reduce power bills drastically.
• Pressure Control Switch/Pressure Cut Off (*PCO) device.
• Low water Level Cut Off (*WCO) device for safety of heating element.
• To work on 220/230Volts, 50/60 Hz AC supply.

Optional:

• G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
• P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
• Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra) (FOR DIGITAL MODEL ONLY)
• Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
• Spare Silicon Gasket to cost extra.
• Spare Heater to cost extra.
• TFT Touch Screen Display Controller in lieu of LCD display.
• Circular chart recorder to cost extra (for Temperature only)
• Circular chart recorder to cost extra (for Temperature and Pressure only)

Features:

• MAC Semi Automatic Digital Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
• These are semi automatic models requiring tighter control of temperature and sterilizing time, thus eliminating any chances of under or over exposure of media/ samples with respect to temperature and hold time.
• Inner chamber is made of Stainless Steel (SS-304 grade).
• Outer body is made of Steel.
• Heaters cover stand and carrier/bucket are made of Stainless Steel.
• Lid made of thick machined Stainless Steel plate.
• Radial locking lid ensures user safety and safe locking.
• Radial arms are made of mild steel.
• Rings & legs are made of mild steel.
• Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, extra Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
• Drain Valve facilitates easy cleaning of the chamber.
• Moulded jointless silicon rubber gasket.
• All internal joints are argon arc welded, ground and polished to give crevice free internals.
• µProcessor based Controller with time and temperature settable by user.
• Operating range from 15 to 22 psi pressure. (adjustable)
• Class ‘A’ Platinum (Pt-100) sensor, enabling precise and accurate monitoring in 0.1°C resolution and ±1°C accuracy.
• End of cycle buzzer to alert the user.
• Miniature Circuit Breaker for MAINS On/Off plus safety of control panel.
• Industrial grade energy efficient heaters reduce power bills drastically.
• Fitted with low water cut-off for general safety of heating elements.
• To work on 220/230Volts, 50/60 Hz AC supply.

Optional

• G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
• P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
• Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra) (FOR DIGITAL MODEL ONLY)
• Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
• Spare Silicon Gasket to cost extra.
• Spare Heater to cost extra.
• TFT Touch Screen Display Controller in lieu of LCD display.
• Circular chart recorder to cost extra (for Temperature only)
• Circular chart recorder to cost extra (for Temperature and Pressure only)