Jay Industries

Sutarwad, Bhavnagar, Gujarat

• Model JIP50 AA
• Capacity Drilling Cap. In M.S. Drilling Cap. In M.S.
• Drilling Cap. In C.I. 60
• Rough Boring in M.S. 85
• Tapping Cap. In M.S. 25
• Drilling Head Spindle Hole Taper MT- 5
• Spindle Travel 255mm
• Spindle Speeds ( RPM × Steps) 75-1700 × 8 mm
• Diameter of RAM 87
• Autofeed Ranges (mm/rev.) 0.05 & 0.09
• Working Range Max. Dist. Spindle Nose to Table 660 mm
• Spindle Center to Column 385 mm
• Table Size (Radial Type Movable) 500 x 500 / 625 mm
• Machine Measurement( L × W × H ) 500 × 304 × 1600 mm
• Column Diameter 150 mm
• Dist. From spindle Nose to Base 950 mm
• Power Drill Head Motor 2 HP

• Model JMB23
• Annular Cutter 12-32mm
• Twist Drills 3-23mm
• Countersinking 10-25Ø
• Length 255mm
• Width 210mm
• Height 370-512
• Stroke Length 250mm
• Weight 32 Kg.
• Dim.of Magnet (Dia. x H ) 200 Dia. X 540 Height
• Magnetic Force 1050 Kgf
• Motor Power 1000W
• Total Power 1050W
• Spindle Speed 100-600 RPM
• Spindle MT-2 Type
• Available 110V/220V

• Availability Appr 3000 Kgs
• Spindle Travel 255
• Drive Left Hand
• Column Structure Double Column
• Diameter of Column 280
• Locking System Manual -Separate lock for Arm Radial movement and Arm up-down movement
• Lifting nut Gun Metal - 100 mm long
• Spindle Quill / Ram Movement In Cylinder Liner Bush
• Spring Heavy Duty Compression Spring
• Drill Head Movement By Rack & Pinion On Bearings & Rollers
• Drilling in MS 50
• Drilling in C.I. 60
• Rough Boring in M.S. 90
• Tapping in M.S. 42
• Spindle Taper MT-4
• Spindle Speed 12 Steps
• Diameter of Ram (quill) 80
• No. of Spindle Speeds 12 (all 12 Speeds Through Gears Only and Not By 2 Speed Motor)
• No. of Autofeed 6
• Range of Autofeed (mm/rev) 0.13-1.10 mm/rev.
• Max Min Spindle Nose to Base 1135 / 395
• Vertical Travel of Arm 740
• Max / Min Dist. Of Spindle center to column 1400/615
• Horizontal Travel of Arm 745
• Machine Measurement 1600 x 1000 x 2490
• Drill Head Motor 2 HP / 960 RPM / Flange Mounted
• Elevating Motor 1 HP / 960 RPM / Flange mounted
• Box Table 560 x 460 x 400x

• Model JMB50 (Dual Speed)
• Annular Cutter 12-50 mm
• Twist Drills 1-32mm
• Threading With Tapping Attachment
• Countersinking 10-25Ø
• Length 255mm
• Width 210mm
• Height 370-512
• Stroke Length 250mm
• Weight 32 Kg.
• Measurement (LxWxH ) 180 x 112 x 470
• Magnetic Force 1400 Kgf
• Motor Power 1000W
• Total Power 1050W
• Spindle Speed 220/640 RPM
• Spindle Type MT-3 &19, 05 Weldon
• Available 220V

• Model JMB35
• Availability 14 Kg.
• Annular Cutter 35 mm
• Twist Drills 1-13mm
• Countersinking 10-25Ø
• Length 255mm
• Width 210mm
• Height 370-512
• Stroke Length 150mm
• Dim.of Magnet (LxWxH ) 163 x 120 x 67
• Magnetic Force 900 Kgf
• Motor Power 1000W
• Total Power 1050W
• Spindle Speed 330 RPM
• Spindle 19, 05 Weldon
• Available 110V/220V

• Spindle Travel 250
• Drilling Cap. 40
• Tapping Cap. 30
• Spindle RAM Dia. 78
• Spindle Hole Taper MT- 4
• Spindle Speed 88-2600 x 8

• Spindle Travel 250
• Model JIR38 G (Geared)
• Drilling Cap. 38
• Tapping Cap. 25
• Spindle RAM Dia. 75
• Spindle Hole Taper MT- 4
• Spindle Speed 88-2600 x 8
• Spindle Autofeed Ranges Fine Feed
• Max./Min. Dist. Spindle nose to Base 950/250
• Max./Min. Dist. Spindle center to Column 800/385
• Drilling Radius 900
• Dia. Of Column 130
• Work Table 300 x 200 x 200
• Drill Head Motor 2HP, 960/1440RPM
• Elevating Motor 0.5HP 1440 RPM
• V- Belt Size for Elevating Motor A23

• Model JMB100E (Four Speed)
• Annular Cutter 12-100 mm
• Twist Drills 1-32mm
• Threading With Tapping Attachment
• Countersinking 10-25Ø
• Length 255mm
• Width 210mm
• Height 370-512
• Stroke Length 250mm
• Weight 32 Kg.
• Measurement (LxWxH ) 180 x 112 x 470
• Magnetic Force 2400 Kgf
• Motor Power 1800W
• Total Power 2250W
• Spindle Speed 110/175/245/385 RPM
• Spindle Type MT-3 &19, 05 Weldon
• Available 220V

• Model JMB35 G (Geared)
• Drilling Capacity in M.S. 3-35 mm
• Threading Cap. M20
• Countersinking 10-25Ø
• Magnetic Force 2250 Kgf
• Stroke Length 120mm
• Weight 63 Kg.
• Spindle Speed Ranges 6 with Back Geared
• Spindle Speed 210/310/360/550/1510& 2400 RPM
• Spindle Type MT-4
• Available 440V / 230V

• Spindle Travel 250
• Drilling Cap. 40
• Boring Cap. 75
• Tapping Cap. 30
• Spindle RAM Dia. 78
• Spindle Hole Taper MT- 4
• Spindle Speed 50-936 x 9

• Model JIP40 AA
• Capacity Drilling Cap. In M.S. 40 mm
• Drilling Cap. In C.I. 45 mm
• Rough Boring in M.S. 75 mm
• Tapping Cap. In M.S. 25 mm
• Drilling Head Spindle Hole Taper MT- 4
• Spindle Travel 255mm
• Spindle Speeds ( RPM × Steps) 75-1700 × 8 mm
• Diameter of RAM 87
• Autofeed Ranges (mm/rev.) 0.05 & 0.09
• Working Range Max. Dist. Spindle Nose to Table 660 mm
• Spindle Center to Column 385 mm
• Table Size 500 x 500
• Machine Measurement( L × W × H ) 500 × 304 × 1600
• Column Diameter 150
• Dist. From spindle Nose to Base 950
• Drill Head Motor 2 HP
• Drive All Geared

• Model JIP40x385
• Drilling Cap. In M.S. 40mm
• Drilling Cap. In C.I. 45mm
• Rough Boring in M.S. 75mm
• Tapping Cap. In M.S. 25mm
• Spindle Hole Taper MT- 4
• Spindle Travel 250mm
• Spindle Speeds ( RPM × Steps) 75-1700 × 8mm
• Diameter of RAM 78mm
• Autofeed Ranges (mm/rev.) Fine Feed
• Max. Dist. Spindle Nose to Table 660mm
• Spindle Center to Column 385mm (15”inch)
• Table Size 440 x 440
• Machine Measurement( L × W × H ) 500 × 304 × 1600
• Column Diameter 120
• Dist. From spindle Nose to Base 1060
• Drill Head Motor 1.5 HP
• V- Belt Size B-65

• Min. Order (MOQ) 1 Piece
• Number Of Flower Drilling machine
• Certification CE Certified
• Availability 100-500kg
• Country of Origin 440V
• Condition Used
• Automatic Grade Automatic
• Power 1-3kw
• Driven Type Electric
• Type\ Pillar Drilling machine
• Country of Origin Germany
• Brand Name WMW
• Application Drilling in Metals, Tapping, Reaming and Boring
• Capacity 40mm

Additional Information: