Kalpak Instruments and Controls

Haveli, Pune, Maharashtra

Kalpak make 2000 KN Computerized Servo Hydraulic Compression testing machine KICTM-2000 for Concrete Cubes upto 200 mm & cylinders upto 160 x 320 mm, Integrated control console, twin ports for PC & Printer, Complete automatic cycle with closed loop digital feedback for strain control and Load Control

Endurance Test Machine tests the Fan and/or Blower. Endurance by rotating Fan /Blower at rated RPM with the help of motors. This fully automatic test system can be operated - continuous or cyclic mode and is divided in two sections named as Station 1 & Station 2 with a common control panel. Each station is capable of testing either two Fans or Blowers. A separate electric motor drive with two timing Pulley sets & Timing belts provide identical speed drive to both components of the individual Station. In effect two fans &/or two Blowers or Four Fans / Blowers cabn be tested at a time. The system also has provision to run only one station at a time.

control mechanismcomputerized controller with dedicated software, .add on cards, for control in both auto & manual mode

pc configurationpentium iv 2.6 ghz, with 52x cd-r/rw, 256mb ram, 40gb hdd. mouse, keyboard, 1 serial com port, 2 usb ports, 1 printer port, with windows xp professional preloaded

grips & fixturesmechanical/pneumatic wedge grips, screw type grip, eccentric roller, compression plates, 3 point bending fixture, peel test 90/180 degree fixture, lateral nail withdrawal fixture, fixtures for flexural test, shear test, adhesion/bonding strength etc.

mechanical tests supported

• tensile
• compression
• tear
• shear
• peel
• extraction
• puncture
• friction
• flexure
• insertion
• bend
• adhesion

Pull Off Tester is very useful for Testing of Pull Out Force required to disassemble the component & calculate the Maximum Pull Out Force required.
This Pull Off Tester is consists of Electronic Controller, Upper Platen, Load cell and Loading Screw Jack with Mechanical Drive
Applications :

• Electronic Controller : Electronic Controller is used to support the Upper Platen & Loading Screw Jack. It consist of Load Indicator to indicate current during testing as well as hold Maximum Load, Load/Unload Switches and potentiometer for speed setting. While the Load is Overloaded then Pull Off Tester displays Overload Signal & Buzzer gets ON.

• Upper Platen : Upper Platen is mounted on two Guide Rods. The Height of the Platen is Adjustable. Load Cell is fixed on the Platen.
• Load Cell : Load cell with Maximum capacity up to 5 Tons measures the applied Load.
• Loading Screw Jack : Loading Screw Jack is used to Load as well as to unload the Sample. It can be moved in Upward & Downward Direction.

kalpak computerized universal testing machines are ideal for quality control, r&d / and process troubleshooting. Wide range of tests can be conducted as per latest astm/bs/iso/din standards making them essential for material test laboratories of iso certified companies.

Safety FeaturesEmergency stop button, upper and lower limit switches with over travel protection, load cell overload protection.

Software kalpaks windows based software utm-test-c for control of the machine, online data acquisition to pc as well as data analysis.

Control MechanismComputerized controller with dedicated software, .add on cards, for control in both auto & manual mode

Pc ConfigurationPentium iv 2.6 ghz, with 52x cd-r/rw, 256mb ram, 40gb hdd. Mouse, keyboard, 1 serial com port, 2 usb ports, 1 printer port, with windows xp professional preloaded

Grips & FixturesMechanical/pneumatic wedge grips, screw type grip, eccentric roller, compression plates, 3 point bending fixture, peel test 90/180 degree fixture, lateral nail withdrawal fixture, fixtures for flexural test, shear test, adhesion/bonding strength etc.

Kalpak make Uniaxial compression tester is a universal application test apparatus useful for making studies involving load vs displacement measurement on any type of material. It is basically comprised of a variable speed motorized load frame coupled with state of the art digital load & displacement indicator.
The front panel digital displays provide easy viewability during the test process. The load measurement is done using accurate & the linear transducer measures sensitive strain gauge type load cell & displacement. The load frame is basically a two column frame fitted with a upper platen which can be height adjusted to suit operation. The loading during testing is effected by raising the center ram.
The speed of the ram is adjustable & controlled by the built in micro-controller as it is driven by efficient stepper motor & its digital drive. The unit has provision of the rs 232 compatible interface for pc communication. The data acquisition & analysis software for recording the load vs displacement data is available. It provides data in graphical as well as tabular format & also provides printouts of the test results.

Applications :

• Road testing application – for cbr
  • California bearing ratio test
  • Marshall stability test
  • Unconfined uniaxial compression test

• Soil testing application
  • Quick triaxialtest
  • Flexural strength of soil-cement specimens
  • Punching test on clay block

• Rock & building stone testing
• Concrete, morter , tiles testing and many others
• Asphalt/bituminous material testing

We have Carved Out a Niche as the Most Eminent Manufacturer and Suppliers of Material Testing Systems. We Provide a Huge Range of Qualitative Material Testing Systems, Electromechanical Material Testing System, Material Test System. all These Testing Systems are of High Quality Which is the Result of Over a Decade of Research and Development. These Test Systems are of Extremely High Efficiency and Need Less Maintenance as These Systems are Very Durable. It Can Test Materials in Torsion, Compression and Tension. Loading Can Be Both Dynamic and Static. These Test Systems are Easy and Quick to Operate. It Has a User-friendly Screen and Software as Well. and Wide Range of Tests Can Be Performed. kalpak Material Test Systems Include: texture Analysercbr uncofined Compression Tester pull Out Tester

kalpak computerized universal testing machines are ideal for quality control, r&d / and process troubleshooting. Wide range of tests can be conducted as per latest astm/bs/iso/din standards making them essential for material test laboratories of iso certified companies.

Safety FeaturesEmergency stop button, upper and lower limit switches with over travel protection, load cell overload protection.

SoftwareKalpak’s windows based software utm-test-c for control of the machine, online data acquisition to pc as well as data analysis.

Control MechanismComputerized controller with dedicated software, .add on cards, for control in both auto & manual mode

Pc configurationPentium iv 2.6 ghz, with 52x cd-r/rw, 256mb ram, 40gb hdd. Mouse, keyboard, 1 serial com port, 2 usb ports, 1 printer port, with windows xp professional preloaded

Grips & FixturesMechanical/pneumatic wedge grips, screw type grip, eccentric roller, compression plates, 3 point bending fixture, peel test 90/180 degree fixture, lateral nail withdrawal fixture, fixtures for flexural test, shear test, adhesion/bonding strength etc.