Electric Cutting Tools #469800

We have been indian manufacturer and exporter of TRUCK HEAD AND double spiral brush and hz cutter for boiler tube cleaning and chiler tube cleaning.: Size available: any size can be developed as per customer requirements.

• Internal tube cutter designed to quickly cut through walls of ferrous tubes in condensers as well as heat exchangers for their removal from tube sheet


• Sturdy finish that allows these to be used with portable Electric/Air Drill Motor


• Simple to operate where it requires only inserting it into tube and applying power press inward for the tube to be cut


• Push type internal cutter designed to quickly cut walls of ferrous tubes


• Adjustable collar provided for the cutter to reach into tubes at different distances from tube end


• Range of tools available to cover tubes of different sizes including 5/8" to 1.1/4" O.D


• Designed with flexible orientation to perform most toughest of tasks


• Compact size for easy adjustment

• The internal boiler tube cutter PR-68 is driven via the square in a clockwise direction using either an electric, pneumatic, or hydraulic driving machine.


• PR-68 tube cutters are ideal for cutting thick walled boiler tubes of 2" O.D. & higher.


• PR-68 type tube cutters are available in standard reach of 4" (100mm). Additional reaches in increments of 4" are available up to 16" (400mm)

• Range: 5/8 to 1.1/8 tube OD


• Designed for the use in maintenance of heat exchangers / condensers.


• To be use with portable electric or pneumatic drive.


• Allows cutting 3-4 mm thick tubes.


• Allows cutting 3-4 mm thick tubes.


• Use to cut ferrous and non ferrous tube.


• Standard adjustable reach up to 4 available.

• Powertech One Revolution Internal Tube Cutter pierces and cuts off non-ferrous and thin walled ferrous tubes in one revolution.


• This One Revolution Internal Tube Cutter is designed for hand operation using a ratchet handle.


• The Cutter Tool Bit operates on an eccentric principle. The Tube Cutter is entered in the tube with the Tool Bit in closed position , ratchet is applied and turned in clockwise direction. The Tool Bit contacts the tube during the One Revolution and pierces the tube wall and as turning is continued the Tool Bit shears through the tube along its circumference. This Cutter is fitted with an adjustable collar enabling it to reach into tubes at various distances and they are available in optional increments of 2(50.8mm). Standard adjustable reach is 6(152.4mm).
  A reach = 8(203.2). B reach = 10(254.0mm). C reach = 12(304.8mm) etc.


• All Cutters are available for MM tube sizes also.