Our Products
These spring loaded, self expanding Cutter Heads are designed for rapid removal of hard and obstinate scale formation in straight tubes as found in Evaporators, Juice Heaters, etc. It consists of three bevel 4 straight cutter wheels 4 left cutter wheels and 4 right cutter wheels, fitted on three bridge type arms.
Model No. | Tube I.D. | Cutter Wheels Set of 15 Nos. |
Spare Arms | |
inch | mm | Model | Model | |
HZ-10 | 1.1/4 | 31.7 | HZSRL-1 | HZA-1 |
HZ-10A | 1.5/16 | 33.3 | HZSRL-1 | HZA-1 |
HZ-11 | 1.3/8 | 35.0 | HZSRL-1 | HZA-1 |
HZ-11A | 1.7/16 | 36.5 | HZSRL-1 | HZA-2 |
HZ-12 | 1.1/2 | 38.1 | HZSRL-1 | HZA-2 |
HZ-12A | 1.9/16 | 39.7 | HZSRL-1 | HZA-2 |
HZ-13 | 1.5/8 | 41.3 | HZSRL-1 | HZA-2 |
HZ-13A | 1.11/16 | 42.9 | HZSRL-1 | HZA-2 |
HZ-14 | 1.3/4 | 44.5 | HZSRL-2 | HZA-3 |
HZ-14A | 1.13/16 | 46.0 | HZSRL-2 | HZA-3 |
HZ-15 | 1.7/8 | 47.6 | HZSRL-2 | HZA-3 |
HZ-15A | 1.15/16 | 49.2 | HZSRL-2 | HZA-3 |
HZ-16 | 2 | 51.0 | HZSRL-2 | HZA-3 |
These Cutter Heads produce excellent results in curved or straight tubes. Pivoted arms of cutter Heads swing out by centrifugal force so that the cutters contact every part of the tube wall.
Model No. | Tube I.D. | Cone Cutter Set of 3 Nos. |
Spare Arms | Universal Joint | |
inch | mm | Model | Model | Model | |
WA-12 | 1.1/2 | 38.1 | WAL-1 | WAA-1 | WAUJ-1 |
WA-14 | 1.3/4 | 44.5 | WAL-1 | WAA-1 | WAUJ-1 |
WA-16 | 2 | 51.0 | WAL-1 | WAA-1 | WAUJ-1 |
WA-18 | 2.1/4 | 57.1 | WAL-2 | WAA-1 | WAUJ-2 |
WA-20 | 2.1/2 | 63.5 | WAL-2 | WAA-1 | WAUJ-2 |
WA-22 | 2.3/4 | 70.0 | WAL-2 | WAA-1 | WAUJ-2 |
WA-24 | 3 | 76.2 | WAL-3 | WAA-2 | WAUJ-2 |
WA-28 | 3.1/2 | 88.9 | WAL-3 | WAA-2 | WAUJ-2 |
WA-32 | 4 | 101.6 | WAL-4 | WAA-2 | WAUJ-2 |
These Cutter Heads have 3 to 5 freely pivoted arms, activated centrifugally, which swing out to give access to any part of tube wall.
Model No. | Tube I.D. | Cone & Flat Cutter Set (9) |
Arm | Universal Joint | |
inch | mm | Model | Model | Model | |
SA-16 | 2 | 51.0 | SAFC-1 | SAA-1 | SAUJ-1 |
SA-18 | 2.1/4 | 57.1 | SAFC-2 | SAA-2 | SAUJ-2 |
SA-20 | 2.1/2 | 63.5 | SAFC-2 | SAA-2 | SAUJ-2 |
SA-22 | 2.3/4 | 70.0 | SAFC-3 | SAA-2 | SAUJ-2 |
SA-24 | 3 | 76.2 | SAFC-3 | SAA-2 | SAUJ-2 |
SA-28 | 3.1/2 | 88.9 | SAFC-4 | SAA-2 | SAUJ-2 |
SA-32 | 4 | 101.6 | SAFC-5 | SAA-3 | SAUJ-2 |