Kerala Gaskets and Fasteners

Kollam, Ernakulam, Kerala

Graphite (Graphoil) moulded Rings are made from pure Graphite containing no binder or fillers .Graphite Gaskets can be made to any size , shape, profile as per drawing from sheets. These may be from Plain Flexible Graphite, Sheet/Foil insert, Tanged sheet insert, Sheets/Gaskets with Metal insertion of SS304/SS316/GI, Wire Mesh in Stainless Steel/Carbon steel etc. The Graphite Gaskets are specially designed to provide the desired compression with high percentage recovery and low creep relaxation. Seals the minute imperfections-Effective and Excellent Sealing. SpecificationsHigh Temperature Resistance: 200 deg C TO 600 deg C (+3000C in non oxidizing areas)High chemical Resistance: PH 0-14High Pressure Resistance: Up to 1000 PSIComplying the international quality standards, our range of half threaded & full threaded studs is in wide demand in global marketplace.

The metallic ring joint gaskets are manufactured according to the API 6A and ASME B 16.20 standards for application at elevated temperatures and pressures. Ring joint gaskets come in two basic types, an oval cross section and an octagonal cross section. These basic shapes are used in pressures up to 10, 000 psi. The dimensions are standardized and require specially grooved ranges. Ring type Joint Gaskets are designed to seal by "initial line contact" or wedging action between the mating flange and the gasket. By applying pressure on the seal interface through bolt force, the softer metal of the gasket flows into the imperfections of the harder flange material, creating a very tight and efficient seal. Stock materials include soft iron, low carbon steel, 4-6 chrome (F5), 304, 304L, 316, 316L, 347, Monel, Inconel , Incoloy, Duplex, Super Duplex etc. Special Ring Type Joint GasketThese are for critical and non standard applications, where ring type joints are unsuitable in their standard form. KGF offers a range ofspecialized ring type joint gaskets to suit the needs of the petrochemical industry. BX and RX Ring GasketsThe BX ring gasket differs from the standard oval or octagonal shape in a way that it is square in cross section and tapered in each corner. BX can only be used in API 6BX ranges. RX ring gaskets are similar in shape to the standard octagonal ring joint gasket but their cross section is designed to take advantage of the contained fluid pressure in effecting a seal. They are both made to API 6A specifications. STANDARD RING JOINTSStyle R (Oval Octagonal )The contact face is in oval shape. It provides a high reliability seal. These gaskets are manufactured in accordance to API 6A of ASME B16.20 to suit API613 and ASME/ANSI B16.5 Flanges. Fits the round and flat bottom ring groove flange. Style R (Octagonal)More accurate in dimensions and surface finish than oval type because it consists of straight surfaces only.

A PTFE envelope gasket is a composed gasket. The product consists of an envelope of PTFE with an inlay. The envelope gasket is mainly applied as a flange gasket in applications where a high chemical and high pressure resistance is required. PROPERTIES OF A PTFE ENVELOPE GASKETEnvelope gaskets have the chemical resistance of PTFE, but the strength and resilience of the inlay material. PTFE envelope gaskets combine the benefits of different materials: Good chemical resistance.Wide temperature range. This depends both on the envelope as the inlay material.Good pressure resistance, depending on the choice of the inlay material.APPLICATIONS OF THE PTFE ENVELOPE GASKETIn a chemical aggressive environment, where pollution of the medium is not allowed, it is complicated to apply a standard gasket. Here PTFE envelope gaskets are applied as flange gaskets. For example, in the (petro) chemical industry and in the process industry. The envelope gaskets are also ideal for application in the food industry. PTFE is physiologically inert and may be used in direct contact with food (FDA)

We supply a range of gland packing. Gland packing is a typically made of compressed yarn, which is treated with various lubrications. We can supply synthetic and cellulose based packaging, as well as graphite impregnated. Packings are used, for example, to prevent the leakage of water and steam on boats and steam engines. Asbestos RopeTwisted Asbestos Ropes: Several ends of asbestos yarns are uniformly twisted to produce very flexible ropes. Caulking Asbestos Ropes: A number of soft packing with various construction parameters to produce caulking ropes. Ceramic Fiber Braided RopeCeramic Fibre Cloth is a compression packing for very high temperature duties. It is manufactured from an exceptionally stable fibre material that is soft, non-irritating, non-hazardous & is not limited by World Health Organisation or European Union restrictions. These heat resistant fibres are produced using advanced chemical fibre technology. They are spun into a flexible yarn in the UK, together with a low percentage of glass fibre and Inconel wire reinforcement. Pure Carbon Graphite PackingPure Carbon an Inter braide multiservice carbon filament packing for pumps and valves. It is a special packing with low friction characteristics adapted easily and quickly into the equipment and requires only occasional gland adjustments. Flexible Expanded Pure Graphite PackingDiagonally braided from pure expanded flexible graphite yarn

We are engaged in providing a supreme range of Industrial Flanges widely used in diverse industrial applications. The company has taken the leading position in providing the best possible Industrial Flanges available in the market. This range of Industrial Flanges is put through rigorous quality control checks to make it superior to other similar products available in the market. Stainless Steel: ASTM A 182, A 240 Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H Carbon Steel: ASTM A 105, ASTM A 181 Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91 Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy 904 Copper Alloys: Aluminium, Copper, Brass & Gunmetal Types : Weldneck, Slipon, Blind, Socket Weld, Lap Joint, Spectacles, Ringjoint, Orifcase, LongWeldneck, DeckFlange, etc.Size : 1/8"NBTO48"NB. Class : 150#, 300#, 400 #, 600#, 900#, 1500# & 2500 #.

We offer a range of Foundation Bolts of varied shape and size to match your requirement. The optimum quality foundation bolts that are made out of finest stainless steel and mild steel material make the product durable and sturdy. The Industrial bolts are available with standard packaging and quick delivery as per the need of our client These Foundation Bolts are available in different variety of types including L type foundation bolts, J Type foundation bolt, anchor nut foundation bolt, Plate type foundation bolts.

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer specification. As per IS-1367 Class 5.6, Class 8.8, Class 10.9, ASTM A 193 B7, B8, B8M, A2-70, A4-70, A4-80 Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation.Threading Sizes M6 to M100 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types Full Thread Hex BoltsHalf Thread Hex BoltsHex Bolts for Steel Structures as per IS-6639Special Hex Bolts as per DIN 561, DIN 933Other Hex Bolts as per your specific requirement and drawing.

Wedge Anchors/Thru BoltOur range of wedge anchor, wedge bolt anchors, thru bolt is a fully threaded, torque controlled wedge anchor, wedge bolt anchors, thru bolt, wedge expansion anchor, which is designed for consistent performance. Heavy duty hooks, eye anchors, eye anchors bolts made of pure zinc these Anchors, eye anchors, eye anchors bolts can be installed in hard media like quality concrete as well as soft media such as brick masonry, light weight concrete etc., and is completely rust proof. They are suitable for all type of brick work and block work. Heavy Duty Hook /Eye (closed) AnchorsWe offer customers precision designed Heavy Duty Shell Anchors, projection anchors. Our close association with leading Indian and overseas manufacturers allow us to successfully handle the supplying demands of these Anchors. Heavy Duty Shield/Projection Bolt AnchorsPin Type Anchors is fast and easy to use expansion Anchors, Pin Type Anchors Hit Anchors / Pin Type AnchorsHit Anchors, Pin Type Anchors is fast and easy to use expansio Anchors, Hit Anchors, Pin Type Anchors. Drop In AnchorsWe offer Heavy Duty Fixed Shell Anchors used for fixing of concrete, solid bricks, perforated bricks and hollow blocks. It is made of steel pressed use to concrete is appreciated. The material used is low carbon steel, stainless steel 202/304/316

Camprofile gaskets used as Heat Exchanger Gaskets consist of a metal core with concentric grooves on either side with sealing materials. The Sealing layers (depending on the service duty) can be Graphite, PTFE (Teflon), CAF or Metal (e.g. Aluminium or Silver). Camprofiles can be used without sealing layers to provide an excellent seal but there is a risk of flange surface damage. These type of Gasket features excellent an_-blowout properties associated with the reliability of a solid metal-to-metal seal combined with soft sealing face to ensure a tighter joint. It is manufactured for all ranges including class 150# to class 2, 500# & PN designated ranges. The Camprofile is the preferred gasket when improved performance at low seating stress is required. Camprofile is an ideal replacement for problem applications associated with jacketed gaskets. Soft Iron, Low carbon steel, Monel Aluminium, Copper, Brass, Cupronickel 90%/10%, 70%/30%, Inconel 600, 800 and different grades of Stainless Steel. FILLERCommon filler materials used are Asbestos mill board, CAF, Non asbestos, PTFE and Grafoil. We have adequate capacity to produce any shape and size with many compartmental ribs out of different materials for heat transfer equipment, coolers, condensers, joints etc. Heat Exchanger gaskets are more compressible than sole-metal corrugated types and offer better compensation for flange irregularities when high pressures are to be sealed. CLADDING METALWhen a Camprofile is replacing an existing gasket (eg. spiral wound gasket); KGF recommends a 4mm thick core to prevent unnecessary stresses on existing pipe lines. For new system, we recommend 5 mm thick cores. The value should be taken into account at the design stage.

We are a leading manufacturer offering high-quality Rubber Floor Mats for floor covering applications. Our mats are designed with a voltage rating of 3000 Volts, ensuring safety and durability. With standard thickness and size, these mats provide reliable protection and insulation. Ideal for industrial and commercial use, our Rubber Mats are a cost-effective solution for maintaining a safe work environment. Trust our expertise in manufacturing top-notch rubber products that meet your specific needs.

Corrugated metal is covered with graphite, ceramic or PTFE layers. Accommodates a wide range of temperatures and seals effectively during thermal cycling. TEPHONEX GASKET - With Expanded PTFE sealing element-Chemically inert, Forms a tight seal under low bolt load, Conforms to minor sealing surface imperfections & withstands temperatures to 500 F(260 C) TEPHOGRAF GASKET - With graphite and Expanded PTFE sealing elementCombines safety with chemical resistance, Conforms to minor sealing surface imperfections, Rigid yet compressible CORRUGRAF GASKET - With flexible graphite sealing elementAccommodates a wide range of temperatures, Seals effectively during thermal cycling, Fire safe-withstood API and fire tests, Chemically resistant & Long service life. SHAPE AND CONSTRUCTIONThe metal gaskets are produced in several types to meet the most demanding applica_ons. Shapes: Round, Oval, Rectangular, etc.