• 100% High Tenacity Polyester
• Made of multi-layered Webbing
• Flat & wide Load bearing surface
• According to EN-1492-1:2000 or ASME B 30.9
• Safety Factor 7:1 and 5:1
• Low Stretch Factor: Elongation 3-7%
• High strength to weight ratio
• Available up to 300 mm width & 110 Ton Capacity
• Colour coded for easy identification
• Maximum working temperature 90°C

We manufacture two-legged wire rope slings made of tested quality wire ropes as per IS Specifications with different end fittings attachments for various lifting purpose. We are capable to make these slings as per customer’s specific requirements of lifting. All slings are as per IS: 2762-1982 and can be supplied in various working load limits (WLL). Splicing of slings are as per IS: 5245 (Part-II). Slings are available with oblong ring and round ring at top.  

Vehicle lifting net slings are specialised slings which are generally used to lift vehicles such as Truck, Bus, cars from cargo hold of ships and likes. Vehicle can be rolled on to the sling nets for easy lifting.

These are always used and rated in pairs.

• Made of high tenacity polyester webbing.
• Truck Lifting Net up to 20 ton SWL each
• Single row wheel at front and back
• Width 2800 mm Base
• Slings as per EN standards

• 100% High Tenacity Polyester
• Made of 3 Ply Webbing
• Flat & wide Load bearing surface
• According to EN-1492-1:2000 or ASME B 30.9, IS:15041
• Safety Factor 7:1 and 5:1
• Low Stretch Factor: Elongation 3-7%
• High strength to weight ratio: Weight 80% less than Equivalent Wire or Chain slings
• Available up to 300 mm width & 18 Ton Capacity
• Colour coded for easy identification
• Maximum working temperature 90° c
• Anti-abrasion sleeves and Anti- cutting sleeves protection (optional)

• Made from 3 strand Industrial grade Nylon rope as per IS: 4572-1992
• Slings Hand spliced by skilled workers.
• Splicing conforms to IS: 9944-1992
• Slings with identification tag and test certificate from government approved test house.
• Available in sizes 8 mm dia to 48 mm dia
• Available in 3 different types: Eye & Eye, Round Endless and Braided Type 
• Low weight high strength.
• Free from kinks, no reverse bends.
• Enhance performance at jerk load.

We supply one way slings for different usage and capacity range. Common application for these one way slings are lifting, positioning and transportation of various items mainly pipes etc for export cargo. These slings are inserted in the pipe bundles/Loads prior to dispatch at the designated load balance points so that no additional slinging is required while loading in the cargo, thus save the time and efforts. After the load reaches its destination it is unloaded by these one way slings and slings must not & should not be used again instead they should be disposed off. These one way slings can be designed for capacity range few kilos to 5 tons.

Slings are also be designed for 6-7 lifting usage for Pre-Slung techniques. Higher capacity Pre-Slung slings are also available as per specific requirements. All these slings are engineered and tested at the point of manufacture and labelled accordingly. These slings are endless types but can be made in eye to eye type also.

• Designed to single use- One way and Pre-Slung techniques
• Pre-slung as per EN-1492-1 and One Way slings as per ASME B30.9 & DIN 60005
• Low cost with simple design
• Stronger and more compact then synthetic rope slings or other alternates.
• Easy to use and can be pre-inserted in the bundles of pipe.
• Save the time as well as cost on-site slinging & re-slinging loads.

• Extreme Usage Needed Extreme Innovation At the Lowest Cost
• ferreterro Cranelover® Series + Dynaflexx® (patent Applied) = Marshall

The newly innovated MARSHALL slings are the best slings to use with sharp edges loads. MARSHALL slings have Dynaflexx protection sleeves fixed with heavy duty polyester slings. Dynaflexx are the most unique protection sleeves engineered in a manner that it provides advantages of both Anti-cut and Anti-abrasive properties. MARSHALL slings have proven their superb efficiency and longer service life at extreme usage. MARSHALL slings are most economic slings due to their longer service life and comparatively low cost than any other Anti-cut protection available.

Features

• Made of high tenacity polyester webbing.
• Equipped with Dynaflexx Protection sleeves.
• Single or double side Dynaflexx type.
• Available in capacity up to 50 Ton.
• Safety factor 7:1 & 5:1
• Conforms to En-1492-1 & ASME B30.9

Advantages

• Extreme cut protection & abrasive resistance.
• Heavy duty slings, ideal for steel industry.
• Low cost, high efficiency.
• Light weight, easy to handle.
• All properties of Anti-cut & Anti Abrasive in-built.
• Longer service life due to Dynaflexx.
• Marking to indentify side of use in single Marshall.
• Marking available in English & Regional languages.
• Gives approx. 7-8 time life than ordinary slings.
• Customised for specific requirements.

Multi leg Polyester slings are made of using either Flat Webbing Slings Straps or Endless type round slings as per specific requirements depending upon uses and safe working loads. A set of multi leg slings includes Master link, Auxiliary links and different end fittings like Eye hooks, Swivel hooks, D-Shackles or Bow- Shackles, Rings as required. All these fittings are made of quenched and tempered alloy steel grade-80 material. Flat slings are stitched directly to the metal ring while Endless round slings are attached with connecting links. Anti-abrasive and Anti-cutting protection sleeves can be fitted as per specific requirements.

Features

• Selection of Flat Webbing or Round Slings.
• Choice of 2 Leg, 3 Leg and 4 Leg Types
• Available in Customised Lengths
• High Strength to Weight Ratio
• Colour Coded for Identification
• Different End Fittings Available
• End Fitting Metal Componants Forged Alloy Steel
• Anti-abrasion Sleeves and Anti Cutting Slleves Protection
• Conforms En-1492-1, En-1492-2 and Asme B30.9

Advantages

• Better load control and balance. Bridle slings give fixed lifting points and choice of multiple legs.
• Hardwares avoid wearing & cuts of slings at load bearing points

• 100% High Tenacity Polyester
• Made of Double thickness of Webbing
• Flat & wide Load bearing surface
• According to EN-1492-1:2000 or ASME B 30.9 & IS:15041
• Safety Factor 7:1 and 5:1
• Low Stretch Factor: Elongation 3-7%
• High strength to weight ratio: Weight 80% less than Equivalent Wire or Chain slings
• Available up to 300 mm width & 12 Ton Capacity
• Colour coded for easy identification
• Maximum working temperature 90° c
• Anti-abrasion sleeves and anti cutting sleeves protection (optional)

Pump lifting chains are designed to simplify the lowering and raising of submersible pumps. From sewers to waterworks, these robust steel chains are made especially for lifting in underwater settings. As such they are capable of staying corrosion-free for as long as possible, even with moisture in the air and complete immersion on the cards. We supply Pump lifting Chain made of SS304 grade and Alloy Steel Grade-80 with galvanized finish.

Our product range includes Reeving Choker Slings with alloy steel hardened fittings. All hardware fittings are made in-house. These slings are ideal for choker lift. These slings available in two types; Choker hardware type & Basket hardware type

Choker Fitting type

These slings are made with a triangle fitting on one end and a slotted triangle choker fitting at other end. This type of arrangement provides very efficient and effective method of choker lift. These slings can also be used in Vertical hitch and Basket hitch.

Basket Fitting type

These slings are made with a triangle fitting at both ends. This sling can be used in Vertical or Basket hitch but cannot be used in Choker hitch

Features

• Available up to 30 ton capacity
• Alloy steel end fittings
• 3-7% elongation with Polyester.
• Available in Safety Factor 7:1 & 5:1
• Conforms EN_1492-1 & ASME B30.9

We supply customized Glass handling systems to handle up to 15 M Ton of float glass sheet stacks/bundles. Glass handling systems consist of special sleeves which can be detachable and are cut resistant. We also supply systems to bundle the glass sheets which can be repetitively used instead of steel strapping.

Features

• Safely handle large cases of glass.

• Load capacity up to 10 ton

• Abrasive sleeves on eyes.

• 500 mm long PU Sleeves.

• AA Sleeve PU impregnated at bottom.

• Can be customized as needed

We also supply customized glass lifting slings which are mainly used by Glass cladding companies.

All these slings can be designed as per specific requirements of client.

FERRETERRO molded slings have permanent coating of specially formulated polymer material with very resistant characteristic. It becomes harder and more resistant against cuts when laid around a sharp edge due to compression in its molecular structure by a stressed surface. These slings are ideal for lifting of sharp edge loads like steel coils etc.

• Available in medium and strong coating variant.
• Polyurethane coating from 2 mm to 25 mm thickness.
• Coating thickness can be chosen as required.
• Available in one side or both side coating.
• Integrates abrasion protection for long service life, even in rough usages.
• Extremely abrasion resistant slings yet flexibility and more durability than ordinary slings.
• Coating as per required, possible up to full length
• Available up to 30 ton capacity

Wide Body Sling are Ideal for Lifting Operations Where More Surface Contact is Required. We Can Supply Wide Body Slings in Different Capacities and Width as per Specific Requirements

Available in 400 Mm to 2400 Mm Width Capacity Range 20 Ton to 50 Ton

FERRETERRO ULTRA SLINGS are made of HMPE fibers manufactured by DSM Dyneema BV. It is a super strong High Modulus Polyethylene (HMPE) fiber and give maximum strength but is light weight. It is 8-10 time lighter than comparable steel wire rope slings and almost 40% stronger than Aramid fibers on a weight for weight basis. FERRETERRO ULTRA SLINGS floats on water and are extremely durable and resistant to moisture, UV Light and Chemical. Due to the facts that it is a very light and soft sling results in less damage to the steel coils edges and less work related injuries. As a result there will be big reduction in utilization cost. Ferreterro specifically developed round slings for Steel coils handling or other sharp and heavy loads using the fibers from DSM Dyneema. This round sling is made with 100% HMPE Yarn and has an engineered outer cover which is designed with special Anti-cut Weave using fiber from DSM Dyneema. Anti-Cut Sleeves can be in full length of sling or a movable type for use at sharp corners of load

• Very High Strength and Less Weight.
• Easy handling, higher efficiency.
• If the sleeve is damaged simply it can be changed no need to replace the whole slings.
• The sleeve size is small and easy to slide to fit proper place.
• Remarkably thin sling offers advantages in situations with lower clearance between two coils.
• Elongation approx. 0.5% just similar to steel wire rope slings.
• Low elongation of sling ensures precision lifting of coils.
• Very long service life due to HMPE outer cover and Sleeves
• Sleeves can be movable or Velcro type removable.
• Ferreterro Ultra slings are suitable to use in very low temperature can be used at -50° temperature.
• Resistant to chemical such as Acids and Alkalis.

Temporary Pipe Restraint (TPR) system is used on high pressure temporary flowlines. Properly applied, this system will provide an additional level of protection for personnel and physical assets by minimizing the amount of sudden movement in the event of an iron failure. The TPR system comes in two models: Standard and Premium.

TPR system is easier and faster to use and service than competitive restraints. It can be rigged up and down concurrently with pipework rigging, rather than the sequential rigging required by competitive systems. This means if you have a piece of iron that needs to be replaced, you can break the TPR and replace the iron without removing all the TPR. TPR system can be united anywhere along the flowline and quickly re-installed after a leaking connection is addressed. This allows the operator to resume operations faster and negates the need to completely dismantle the system to correct a problem.

• The Standard TPR system offers a competitive price and utilizes the same installation method as the Premium system.
• The lightweight material, combined with higher break loads than competitive systems, increases safety at the job site.
• Premium system offers several additional features that further increase job site safety and efficiency on the well pad.
• The links in this system are engineered with a unique combination of inspection features and can be quickly
• inspected before and after each job.
• The construction and materials used in the Premium system are such that they outlast and have better chemical resistance than any competitive offering.
• The TPR system should never be considered as a substitute for due diligence with respect to proper selection of pressure containing equipment and execution of a regular inspection and maintenance program.
• The TPR system can significantly reduce, but never eliminate, damage in cases of flowline separation under pressure

The pipes have to be stacked in fixtures/ steel frames so that initial shape is made by the pipes in form of hexagonal bundles. As shown in pictures above single stand or multiple stands near packing/exit area will facilitate the bundling. These frames shall be fabricated considering diameter of pipe and number of pipes in one bundle. For coated pipe the frames should be properly coated /covered by PU Elastomer/ foam/Rubber Sheet or any suitable material to avoid scratches.

• Soft, Supple & light weight, easy to use.
• Super flexible, conforms to shape of load, flattened and lift the load securely.
• Works well for confined spaces.
• All advantages of Flat Web slings & Round slings.
• Extra Sleeves cab be added to body easily.
• Adapts to all sizes, types and load configurations.
• Light weight and pliable for easy lifting and storage.
• Colour coded for easy identification.
• Available in safety factor 7:1 and 5:1
• Free overload tail indicator yarn and optical fiber

The normal polyester slings are non-conductive against electricity. Our Anti-static slings are actually Static transferor where delicate electronic equipments are been lifted and static electricity can prove hazard. These patented slings are manufactured with zero resistance electric current transferor woven in straps.

These slings are ideal for lifting of  :

• Rotors
• Missiles
• Nuclear Warheads
• Atomic Waste
• Nuclear Waste
• Explosives
• Electronic devices.

Features

• Our Anti-static sling has zero resistance wires on the webbing which transfer any static current.
• We have them strategically placed so that the lifted product always remains earthed. (About 6 wires protruded fully running through the length of belt)
• The end fitting is in contact with wires running through the same to transfer static to hook.
• An added security feature we put a 1 meg ohm static neutralizer on the sling so it can be clipped to the product been lifted.

• Soft, Supple & light weight, easy to handle.
• High Weight to strength ratio.
• Seamless cover, no edge to wear out.
• Cover abrasion will not reduce the capacity.
• Adapts to all sizes, types and load configurations.
• Lightweight, easy to rig, store & clean.
• Orange Colour coded.
• Available in capacity 36 ton to 350 ton
• Free overload tail indicator yarn and optical fiber
• Available in endless & eye to eye types

These slings work in hostile environment, extremely cut resistant and amazingly light weight. Abrasion is no problem and are stronger than steel. Available in HMPE yarn made by DSM Dyneema ® BV “THE WORLD’S STRONGEST YARN”

Our product range include Ferreterro make round endless slings, manufactured by using HMPE yarn in higher capacities up to 500 M Ton. These slings have topmost degree of perfection. These are suitable to specialized extreme heavy lifting requirements. These slings are available in Round Endless, Eye and Eye type and Two Path Sling type.

Lightness

These slings are very light weight yet stronger than polyester and steel wire slings of same capacity. The weight factor of these slings is approx. 2.4 in comparison to polyester and 8-9 in comparison to steel.

Strength

Due to their super-strength, very light weight and abrasion resistance, they are widely used to lift heavy objects, steel coils etc.

Cut Resistant

These slings are very good abrasion and cut resistant. Ferreterro brand slings made of HMPE yarn floats on water and are extremely durable and resistant to moisture, ultraviolet sunlight and chemicals

• Made from 3 strand Industrial grade Polypropylene rope ISI marked as per IS: 5175-1992
• Slings Hand spliced by skilled workers.
• Splicing conforms to IS: 9944-1992
• Slings with identification tag and test certificate from government approved test house.
• Available in sizes 12 mm dia to 48 mm dia
• Available in 3 different types: Eye & Eye, Round Endless and Braided Type 

An economical solution for lowering pipeline where the weight and repetition is low. These belts are wide up to 36” and can be made up to 10 ton capacity of any length required. These belts are strongly bonded and strengthened for lifting. These slings can be polyurethane impregnated or vinyl coated for extra strength and abrasive resistance.

Advantage

• Higher load carrying capacity than web slings, with a wider contact area.
• These sling bags offer the best support for sensitive loads like Cylinders etc.
• Available in standard width up to 900 mm

• 100% High Tenacity Polyester
• Made of 4 Ply Webbing
• Flat & wide Load bearing surface
• According to EN-1492-1:2000 or ASME B 30.9, IS:15041
• Safety Factor 7:1 and 5:1
• Low Stretch Factor: Elongation 3-7%
• High strength to weight ratio: Weight 80% less than Equivalent Wire or Chain slings
• Available up to 300 mm width & 24 Ton Capacity
• Colour coded for easy identification
• Maximum working temperature 90°C
• Anti-abrasion sleeves and Anti- cutting sleeves protection (optional)

Splicing the ends of a piece of wire rope makes an endless sling. It is simple to handle and can be used in several different ways to lift loads. The endless sling is most commonly used as a choker hitch. When the endless sling is used as a choker, user passes it around the object forming a loop on top of the object. The other end is passed through this loop, pulled tight and attached to the cargo hook. To balance the load, user spread apart the two parts of the sling on the bottom of the object.

Double part endless slings are available in both ferule spliced and hand spliced.

• 100% High Tenacity Polyester
• Made of Double thickness of Webbing
• Flat & wide Load bearing surface
• According to EN-1492-1:2000 or ASME B 30.9
• Safety Factor 7:1 and 5:1
• Low Stretch Factor: Elongation 3-7%
• High strength to weight ratio
• Available up to 300 mm width & 12 Ton Capacity in
• Single layer & 24 ton in double layer
• Colour coded for easy identification
• Maximum working temperature 90°C

Advantages

• Easy handling in choking use.
• Loads are always carried by two strands
• Higher load capacity compare to web slings of equal width.
• Highly cost efficient.
• Ideal for pre-Slung pre-Slung techniques
• Available in simplex or duplex configuration

• Lift Arts make Braided Belt Slings of wire ropes are ideal for the lifting of the loads which are abrasive, hot or may cut the other types of slings like polyester webbing belt slings. Woven from tested quality high tensile wire ropes these slings are very flexible, have wide surface to load contact. These can be made in various length and width and safe working load capacity with both soft eye and hard eye design. These are ideal for lifting of coils, hot steel loads etc. These slings are made from 4 mm wire rope dia to 16 mm wire rope dia and numbers of wires vary from 6 to 14 depending upon the specific requirements of width and capacity. Generally made of 6x19 or 6x 36 steel core construction wire ropes. 
• Wire rope braided belts are available in two types, with soft eyes at both ends or with round or oblong rings.
• We can manufacture wire rope braided belt sling in different capacities, length & width as per client’s specific needs.

A Grommet consists of an endless rope made from one continuous length of strand formed to make a body composed of six strands around a strand core. The strand ends are tucked into the body forming the core with the tuck position diametrically opposite to the core position.

We manufacture standard grommets from a single strand of wire rope to make a complete circle of wire rope, with almost invisible joints, and these can be used for many purposes such as lifting slings, piling extractors, vibration inhibitors etc. Grommet are available in endless round and with eye and eye type.

• Soft, Supple & light weight, easy to handle.
• The most flexible sling available conforms to the load extremely well and provides choker hold.
• Being endless, wears evenly as load & hook contact points can be continually rotated to extend sling life.
• Load bearing fibers never come in contact with the load.
• Seamless cover, no edge to wear out.
• Cover abrasion will not reduce the capacity.
• Adapts to all sizes, types and load configurations.
• Lightweight, easy to rig, store & clean.
• Colour coded for easy identification.
• Available in safety factor 7:1 and 5:1
• Free overload tail indicator yarn and optical fiber

To protect the round slings from cut while using on sharp edges Anti-Abrasive and Anti-cut sleeves must be used. There are basically 2 types of sleeves available for round slings

• Movable type sleeves- slide freely on sling but cannot be removed
• Quick Sleeve – Slide freely on sling and removable have Velcro

All these slings are available in different types of material i.e. Polyester, Kevlar, High Molecular Polyethylene (HMPE), Polyester with PU impregnated, Polyurethane blended Polymer and Polyurethane

• 100% High Tenacity Polyester
• Made of single thickness of Webbing
• Flat & wide load bearing surface
• According to EN-1492-1:2000
• ASME B 30.9 & IS:15041
• Safety Factor 7:1 and 5:1
• Low Elongation 3 – 7%
• High strength to weight ratio
• Available up to 300 mm width
• Colour coded for easy identification
• Maximum working temperature 90° c
• Anti-abrasion sleeves and anti cutting sleeves protection (optional)

We manufacture Four-legged wire rope slings made of tested quality wire ropes as per IS Specifications with different end fittings attachments for various lifting purpose. We are capable to make these slings as per customer’s specific requirements of lifting. All slings are as per IS: 2762-1982 and can be supplied in various working load limits (WLL). Splicing of slings are as per IS: 5245 (Part-II). Slings are available with oblong ring and round ring at top.  

We manufacture Thre-legged wire rope slings made of tested quality wire ropes as per IS Specifications with different end fittings attachments for various lifting purpose. We are capable to make these slings as per customer’s specific requirements of lifting. All slings are as per IS: 2762-1982 and can be supplied in various working load limits (WLL). Splicing of slings are as per IS: 5245 (Part-II). Slings are available with oblong ring and round ring at top.  

• 100% High Tenacity Polyester
• Made of multi-layered Webbing
• Flat & wide Load bearing surface
• According to EN-1492-1:2000 or ASME B 30.9
• Safety Factor 7:1 and 5:1
• Low Stretch Factor: Elongation 3-7%
• High strength to weight ratio
• Available up to 300 mm width & 110 Ton Capacity
• Colour coded for easy identification
• Maximum working temperature 90°C

We manufacture two-legged wire rope slings made of tested quality wire ropes as per IS Specifications with different end fittings attachments for various lifting purpose. We are capable to make these slings as per customer’s specific requirements of lifting. All slings are as per IS: 2762-1982 and can be supplied in various working load limits (WLL). Splicing of slings are as per IS: 5245 (Part-II). Slings are available with oblong ring and round ring at top.  

Vehicle lifting net slings are specialised slings which are generally used to lift vehicles such as Truck, Bus, cars from cargo hold of ships and likes. Vehicle can be rolled on to the sling nets for easy lifting.

These are always used and rated in pairs.

• Made of high tenacity polyester webbing.
• Truck Lifting Net up to 20 ton SWL each
• Single row wheel at front and back
• Width 2800 mm Base
• Slings as per EN standards

• 100% High Tenacity Polyester
• Made of 3 Ply Webbing
• Flat & wide Load bearing surface
• According to EN-1492-1:2000 or ASME B 30.9, IS:15041
• Safety Factor 7:1 and 5:1
• Low Stretch Factor: Elongation 3-7%
• High strength to weight ratio: Weight 80% less than Equivalent Wire or Chain slings
• Available up to 300 mm width & 18 Ton Capacity
• Colour coded for easy identification
• Maximum working temperature 90° c
• Anti-abrasion sleeves and Anti- cutting sleeves protection (optional)

• Made from 3 strand Industrial grade Nylon rope as per IS: 4572-1992
• Slings Hand spliced by skilled workers.
• Splicing conforms to IS: 9944-1992
• Slings with identification tag and test certificate from government approved test house.
• Available in sizes 8 mm dia to 48 mm dia
• Available in 3 different types: Eye & Eye, Round Endless and Braided Type 
• Low weight high strength.
• Free from kinks, no reverse bends.
• Enhance performance at jerk load.

We supply one way slings for different usage and capacity range. Common application for these one way slings are lifting, positioning and transportation of various items mainly pipes etc for export cargo. These slings are inserted in the pipe bundles/Loads prior to dispatch at the designated load balance points so that no additional slinging is required while loading in the cargo, thus save the time and efforts. After the load reaches its destination it is unloaded by these one way slings and slings must not & should not be used again instead they should be disposed off. These one way slings can be designed for capacity range few kilos to 5 tons.

Slings are also be designed for 6-7 lifting usage for Pre-Slung techniques. Higher capacity Pre-Slung slings are also available as per specific requirements. All these slings are engineered and tested at the point of manufacture and labelled accordingly. These slings are endless types but can be made in eye to eye type also.

• Designed to single use- One way and Pre-Slung techniques
• Pre-slung as per EN-1492-1 and One Way slings as per ASME B30.9 & DIN 60005
• Low cost with simple design
• Stronger and more compact then synthetic rope slings or other alternates.
• Easy to use and can be pre-inserted in the bundles of pipe.
• Save the time as well as cost on-site slinging & re-slinging loads.

• Extreme Usage Needed Extreme Innovation At the Lowest Cost
• ferreterro Cranelover® Series + Dynaflexx® (patent Applied) = Marshall

The newly innovated MARSHALL slings are the best slings to use with sharp edges loads. MARSHALL slings have Dynaflexx protection sleeves fixed with heavy duty polyester slings. Dynaflexx are the most unique protection sleeves engineered in a manner that it provides advantages of both Anti-cut and Anti-abrasive properties. MARSHALL slings have proven their superb efficiency and longer service life at extreme usage. MARSHALL slings are most economic slings due to their longer service life and comparatively low cost than any other Anti-cut protection available.

Features

• Made of high tenacity polyester webbing.
• Equipped with Dynaflexx Protection sleeves.
• Single or double side Dynaflexx type.
• Available in capacity up to 50 Ton.
• Safety factor 7:1 & 5:1
• Conforms to En-1492-1 & ASME B30.9

Advantages

• Extreme cut protection & abrasive resistance.
• Heavy duty slings, ideal for steel industry.
• Low cost, high efficiency.
• Light weight, easy to handle.
• All properties of Anti-cut & Anti Abrasive in-built.
• Longer service life due to Dynaflexx.
• Marking to indentify side of use in single Marshall.
• Marking available in English & Regional languages.
• Gives approx. 7-8 time life than ordinary slings.
• Customised for specific requirements.

Multi leg Polyester slings are made of using either Flat Webbing Slings Straps or Endless type round slings as per specific requirements depending upon uses and safe working loads. A set of multi leg slings includes Master link, Auxiliary links and different end fittings like Eye hooks, Swivel hooks, D-Shackles or Bow- Shackles, Rings as required. All these fittings are made of quenched and tempered alloy steel grade-80 material. Flat slings are stitched directly to the metal ring while Endless round slings are attached with connecting links. Anti-abrasive and Anti-cutting protection sleeves can be fitted as per specific requirements.

Features

• Selection of Flat Webbing or Round Slings.
• Choice of 2 Leg, 3 Leg and 4 Leg Types
• Available in Customised Lengths
• High Strength to Weight Ratio
• Colour Coded for Identification
• Different End Fittings Available
• End Fitting Metal Componants Forged Alloy Steel
• Anti-abrasion Sleeves and Anti Cutting Slleves Protection
• Conforms En-1492-1, En-1492-2 and Asme B30.9

Advantages

• Better load control and balance. Bridle slings give fixed lifting points and choice of multiple legs.
• Hardwares avoid wearing & cuts of slings at load bearing points

• 100% High Tenacity Polyester
• Made of Double thickness of Webbing
• Flat & wide Load bearing surface
• According to EN-1492-1:2000 or ASME B 30.9 & IS:15041
• Safety Factor 7:1 and 5:1
• Low Stretch Factor: Elongation 3-7%
• High strength to weight ratio: Weight 80% less than Equivalent Wire or Chain slings
• Available up to 300 mm width & 12 Ton Capacity
• Colour coded for easy identification
• Maximum working temperature 90° c
• Anti-abrasion sleeves and anti cutting sleeves protection (optional)

Pump lifting chains are designed to simplify the lowering and raising of submersible pumps. From sewers to waterworks, these robust steel chains are made especially for lifting in underwater settings. As such they are capable of staying corrosion-free for as long as possible, even with moisture in the air and complete immersion on the cards. We supply Pump lifting Chain made of SS304 grade and Alloy Steel Grade-80 with galvanized finish.

Our product range includes Reeving Choker Slings with alloy steel hardened fittings. All hardware fittings are made in-house. These slings are ideal for choker lift. These slings available in two types; Choker hardware type & Basket hardware type

Choker Fitting type

These slings are made with a triangle fitting on one end and a slotted triangle choker fitting at other end. This type of arrangement provides very efficient and effective method of choker lift. These slings can also be used in Vertical hitch and Basket hitch.

Basket Fitting type

These slings are made with a triangle fitting at both ends. This sling can be used in Vertical or Basket hitch but cannot be used in Choker hitch

Features

• Available up to 30 ton capacity
• Alloy steel end fittings
• 3-7% elongation with Polyester.
• Available in Safety Factor 7:1 & 5:1
• Conforms EN_1492-1 & ASME B30.9

We supply customized Glass handling systems to handle up to 15 M Ton of float glass sheet stacks/bundles. Glass handling systems consist of special sleeves which can be detachable and are cut resistant. We also supply systems to bundle the glass sheets which can be repetitively used instead of steel strapping.

Features

• Safely handle large cases of glass.

• Load capacity up to 10 ton

• Abrasive sleeves on eyes.

• 500 mm long PU Sleeves.

• AA Sleeve PU impregnated at bottom.

• Can be customized as needed

We also supply customized glass lifting slings which are mainly used by Glass cladding companies.

All these slings can be designed as per specific requirements of client.

FERRETERRO molded slings have permanent coating of specially formulated polymer material with very resistant characteristic. It becomes harder and more resistant against cuts when laid around a sharp edge due to compression in its molecular structure by a stressed surface. These slings are ideal for lifting of sharp edge loads like steel coils etc.

• Available in medium and strong coating variant.
• Polyurethane coating from 2 mm to 25 mm thickness.
• Coating thickness can be chosen as required.
• Available in one side or both side coating.
• Integrates abrasion protection for long service life, even in rough usages.
• Extremely abrasion resistant slings yet flexibility and more durability than ordinary slings.
• Coating as per required, possible up to full length
• Available up to 30 ton capacity

Wide Body Sling are Ideal for Lifting Operations Where More Surface Contact is Required. We Can Supply Wide Body Slings in Different Capacities and Width as per Specific Requirements

Available in 400 Mm to 2400 Mm Width Capacity Range 20 Ton to 50 Ton

FERRETERRO ULTRA SLINGS are made of HMPE fibers manufactured by DSM Dyneema BV. It is a super strong High Modulus Polyethylene (HMPE) fiber and give maximum strength but is light weight. It is 8-10 time lighter than comparable steel wire rope slings and almost 40% stronger than Aramid fibers on a weight for weight basis. FERRETERRO ULTRA SLINGS floats on water and are extremely durable and resistant to moisture, UV Light and Chemical. Due to the facts that it is a very light and soft sling results in less damage to the steel coils edges and less work related injuries. As a result there will be big reduction in utilization cost. Ferreterro specifically developed round slings for Steel coils handling or other sharp and heavy loads using the fibers from DSM Dyneema. This round sling is made with 100% HMPE Yarn and has an engineered outer cover which is designed with special Anti-cut Weave using fiber from DSM Dyneema. Anti-Cut Sleeves can be in full length of sling or a movable type for use at sharp corners of load

• Very High Strength and Less Weight.
• Easy handling, higher efficiency.
• If the sleeve is damaged simply it can be changed no need to replace the whole slings.
• The sleeve size is small and easy to slide to fit proper place.
• Remarkably thin sling offers advantages in situations with lower clearance between two coils.
• Elongation approx. 0.5% just similar to steel wire rope slings.
• Low elongation of sling ensures precision lifting of coils.
• Very long service life due to HMPE outer cover and Sleeves
• Sleeves can be movable or Velcro type removable.
• Ferreterro Ultra slings are suitable to use in very low temperature can be used at -50° temperature.
• Resistant to chemical such as Acids and Alkalis.

Temporary Pipe Restraint (TPR) system is used on high pressure temporary flowlines. Properly applied, this system will provide an additional level of protection for personnel and physical assets by minimizing the amount of sudden movement in the event of an iron failure. The TPR system comes in two models: Standard and Premium.

TPR system is easier and faster to use and service than competitive restraints. It can be rigged up and down concurrently with pipework rigging, rather than the sequential rigging required by competitive systems. This means if you have a piece of iron that needs to be replaced, you can break the TPR and replace the iron without removing all the TPR. TPR system can be united anywhere along the flowline and quickly re-installed after a leaking connection is addressed. This allows the operator to resume operations faster and negates the need to completely dismantle the system to correct a problem.

• The Standard TPR system offers a competitive price and utilizes the same installation method as the Premium system.
• The lightweight material, combined with higher break loads than competitive systems, increases safety at the job site.
• Premium system offers several additional features that further increase job site safety and efficiency on the well pad.
• The links in this system are engineered with a unique combination of inspection features and can be quickly
• inspected before and after each job.
• The construction and materials used in the Premium system are such that they outlast and have better chemical resistance than any competitive offering.
• The TPR system should never be considered as a substitute for due diligence with respect to proper selection of pressure containing equipment and execution of a regular inspection and maintenance program.
• The TPR system can significantly reduce, but never eliminate, damage in cases of flowline separation under pressure

The pipes have to be stacked in fixtures/ steel frames so that initial shape is made by the pipes in form of hexagonal bundles. As shown in pictures above single stand or multiple stands near packing/exit area will facilitate the bundling. These frames shall be fabricated considering diameter of pipe and number of pipes in one bundle. For coated pipe the frames should be properly coated /covered by PU Elastomer/ foam/Rubber Sheet or any suitable material to avoid scratches.

• Soft, Supple & light weight, easy to use.
• Super flexible, conforms to shape of load, flattened and lift the load securely.
• Works well for confined spaces.
• All advantages of Flat Web slings & Round slings.
• Extra Sleeves cab be added to body easily.
• Adapts to all sizes, types and load configurations.
• Light weight and pliable for easy lifting and storage.
• Colour coded for easy identification.
• Available in safety factor 7:1 and 5:1
• Free overload tail indicator yarn and optical fiber

The normal polyester slings are non-conductive against electricity. Our Anti-static slings are actually Static transferor where delicate electronic equipments are been lifted and static electricity can prove hazard. These patented slings are manufactured with zero resistance electric current transferor woven in straps.

These slings are ideal for lifting of  :

• Rotors
• Missiles
• Nuclear Warheads
• Atomic Waste
• Nuclear Waste
• Explosives
• Electronic devices.

Features

• Our Anti-static sling has zero resistance wires on the webbing which transfer any static current.
• We have them strategically placed so that the lifted product always remains earthed. (About 6 wires protruded fully running through the length of belt)
• The end fitting is in contact with wires running through the same to transfer static to hook.
• An added security feature we put a 1 meg ohm static neutralizer on the sling so it can be clipped to the product been lifted.

• Soft, Supple & light weight, easy to handle.
• High Weight to strength ratio.
• Seamless cover, no edge to wear out.
• Cover abrasion will not reduce the capacity.
• Adapts to all sizes, types and load configurations.
• Lightweight, easy to rig, store & clean.
• Orange Colour coded.
• Available in capacity 36 ton to 350 ton
• Free overload tail indicator yarn and optical fiber
• Available in endless & eye to eye types

These slings work in hostile environment, extremely cut resistant and amazingly light weight. Abrasion is no problem and are stronger than steel. Available in HMPE yarn made by DSM Dyneema ® BV “THE WORLD’S STRONGEST YARN”

Our product range include Ferreterro make round endless slings, manufactured by using HMPE yarn in higher capacities up to 500 M Ton. These slings have topmost degree of perfection. These are suitable to specialized extreme heavy lifting requirements. These slings are available in Round Endless, Eye and Eye type and Two Path Sling type.

Lightness

These slings are very light weight yet stronger than polyester and steel wire slings of same capacity. The weight factor of these slings is approx. 2.4 in comparison to polyester and 8-9 in comparison to steel.

Strength

Due to their super-strength, very light weight and abrasion resistance, they are widely used to lift heavy objects, steel coils etc.

Cut Resistant

These slings are very good abrasion and cut resistant. Ferreterro brand slings made of HMPE yarn floats on water and are extremely durable and resistant to moisture, ultraviolet sunlight and chemicals

• Made from 3 strand Industrial grade Polypropylene rope ISI marked as per IS: 5175-1992
• Slings Hand spliced by skilled workers.
• Splicing conforms to IS: 9944-1992
• Slings with identification tag and test certificate from government approved test house.
• Available in sizes 12 mm dia to 48 mm dia
• Available in 3 different types: Eye & Eye, Round Endless and Braided Type 

An economical solution for lowering pipeline where the weight and repetition is low. These belts are wide up to 36” and can be made up to 10 ton capacity of any length required. These belts are strongly bonded and strengthened for lifting. These slings can be polyurethane impregnated or vinyl coated for extra strength and abrasive resistance.

Advantage

• Higher load carrying capacity than web slings, with a wider contact area.
• These sling bags offer the best support for sensitive loads like Cylinders etc.
• Available in standard width up to 900 mm

• 100% High Tenacity Polyester
• Made of 4 Ply Webbing
• Flat & wide Load bearing surface
• According to EN-1492-1:2000 or ASME B 30.9, IS:15041
• Safety Factor 7:1 and 5:1
• Low Stretch Factor: Elongation 3-7%
• High strength to weight ratio: Weight 80% less than Equivalent Wire or Chain slings
• Available up to 300 mm width & 24 Ton Capacity
• Colour coded for easy identification
• Maximum working temperature 90°C
• Anti-abrasion sleeves and Anti- cutting sleeves protection (optional)

Splicing the ends of a piece of wire rope makes an endless sling. It is simple to handle and can be used in several different ways to lift loads. The endless sling is most commonly used as a choker hitch. When the endless sling is used as a choker, user passes it around the object forming a loop on top of the object. The other end is passed through this loop, pulled tight and attached to the cargo hook. To balance the load, user spread apart the two parts of the sling on the bottom of the object.

Double part endless slings are available in both ferule spliced and hand spliced.

• 100% High Tenacity Polyester
• Made of Double thickness of Webbing
• Flat & wide Load bearing surface
• According to EN-1492-1:2000 or ASME B 30.9
• Safety Factor 7:1 and 5:1
• Low Stretch Factor: Elongation 3-7%
• High strength to weight ratio
• Available up to 300 mm width & 12 Ton Capacity in
• Single layer & 24 ton in double layer
• Colour coded for easy identification
• Maximum working temperature 90°C

Advantages

• Easy handling in choking use.
• Loads are always carried by two strands
• Higher load capacity compare to web slings of equal width.
• Highly cost efficient.
• Ideal for pre-Slung pre-Slung techniques
• Available in simplex or duplex configuration

• Lift Arts make Braided Belt Slings of wire ropes are ideal for the lifting of the loads which are abrasive, hot or may cut the other types of slings like polyester webbing belt slings. Woven from tested quality high tensile wire ropes these slings are very flexible, have wide surface to load contact. These can be made in various length and width and safe working load capacity with both soft eye and hard eye design. These are ideal for lifting of coils, hot steel loads etc. These slings are made from 4 mm wire rope dia to 16 mm wire rope dia and numbers of wires vary from 6 to 14 depending upon the specific requirements of width and capacity. Generally made of 6x19 or 6x 36 steel core construction wire ropes. 
• Wire rope braided belts are available in two types, with soft eyes at both ends or with round or oblong rings.
• We can manufacture wire rope braided belt sling in different capacities, length & width as per client’s specific needs.

A Grommet consists of an endless rope made from one continuous length of strand formed to make a body composed of six strands around a strand core. The strand ends are tucked into the body forming the core with the tuck position diametrically opposite to the core position.

We manufacture standard grommets from a single strand of wire rope to make a complete circle of wire rope, with almost invisible joints, and these can be used for many purposes such as lifting slings, piling extractors, vibration inhibitors etc. Grommet are available in endless round and with eye and eye type.

• Soft, Supple & light weight, easy to handle.
• The most flexible sling available conforms to the load extremely well and provides choker hold.
• Being endless, wears evenly as load & hook contact points can be continually rotated to extend sling life.
• Load bearing fibers never come in contact with the load.
• Seamless cover, no edge to wear out.
• Cover abrasion will not reduce the capacity.
• Adapts to all sizes, types and load configurations.
• Lightweight, easy to rig, store & clean.
• Colour coded for easy identification.
• Available in safety factor 7:1 and 5:1
• Free overload tail indicator yarn and optical fiber

To protect the round slings from cut while using on sharp edges Anti-Abrasive and Anti-cut sleeves must be used. There are basically 2 types of sleeves available for round slings

• Movable type sleeves- slide freely on sling but cannot be removed
• Quick Sleeve – Slide freely on sling and removable have Velcro

All these slings are available in different types of material i.e. Polyester, Kevlar, High Molecular Polyethylene (HMPE), Polyester with PU impregnated, Polyurethane blended Polymer and Polyurethane

• 100% High Tenacity Polyester
• Made of single thickness of Webbing
• Flat & wide load bearing surface
• According to EN-1492-1:2000
• ASME B 30.9 & IS:15041
• Safety Factor 7:1 and 5:1
• Low Elongation 3 – 7%
• High strength to weight ratio
• Available up to 300 mm width
• Colour coded for easy identification
• Maximum working temperature 90° c
• Anti-abrasion sleeves and anti cutting sleeves protection (optional)

We manufacture Four-legged wire rope slings made of tested quality wire ropes as per IS Specifications with different end fittings attachments for various lifting purpose. We are capable to make these slings as per customer’s specific requirements of lifting. All slings are as per IS: 2762-1982 and can be supplied in various working load limits (WLL). Splicing of slings are as per IS: 5245 (Part-II). Slings are available with oblong ring and round ring at top.  

We manufacture Thre-legged wire rope slings made of tested quality wire ropes as per IS Specifications with different end fittings attachments for various lifting purpose. We are capable to make these slings as per customer’s specific requirements of lifting. All slings are as per IS: 2762-1982 and can be supplied in various working load limits (WLL). Splicing of slings are as per IS: 5245 (Part-II). Slings are available with oblong ring and round ring at top.