GST : 27AFXPS8829P1ZW
5.0/5
Our Products
Leading Manufacturer, Supplier & Retailer of Industrial Power Tools, Helicoil Extraction Tool, OKS Silicone Grease, GROUND MAGNETIC V BLOCKS and ULTRA HARDENED GROUND V BLOCKS.
Avail from us a wide range of Power Tools that are widely used across
several industries to perform toughest heavy duty industrial
applications with relative ease. The Power Tools offered by us are
sourced from authorized dealer Bosch. We offer a varied range available
in several models and customized basis.
magnetic v blocks
used
for grinding, light milling, drilling & inspection of round &
square jobs. Accuracy for flatness, squareness and parallelism within
0.005mm upto 6”l & 0.010mm for 8” l of"v"block the bigger v angle
&bottom holding surface are equipped with hardened strips for wear
resistance. Uniform and strong magnetic pull to all three magnetic
surfaces top, bottom & v face. Hardness of v face is 60±2 rc. Powder
coated. Easy on- off facility. 120o " v " angle also available.
| Sr.No. | Cat No. | Size | Range (mm) | Pull |
| 1 | UL-10101 Soft | 40L X 40W X 50H [2"] | Ø 3 - Ø 25 | 25 Kg |
| 2 | UL-10101 Hard | 40L X 40W X 50H [2"] | Ø 3 - Ø 25 | 25 Kg |
| 3 | UL-10102 Soft | 75L X 56W X 75H [3"] | Ø 5 - Ø 40 | 75 Kg |
| 4 | UL-10102 Hard | 75L X 56W X 75H [3"] | Ø 5 - Ø 40 | 75 Kg |
| 5 | UL-10103 Soft | 100L X 70W X 95H [4"] | Ø 5 - Ø 65 | 100 Kg |
| 6 | UL-10103 Hard | 100L X 70W X 95H [4"] | Ø 5 - Ø 65 | 125 Kg |
| 7 | UL-10104 Soft | 150L X 75W X 100H [6"] | Ø 5 - Ø 70 | 125 Kg |
| 8 | UL-10104 Hard | 150L X 75W X 100H [6"] | Ø 5 - Ø 70 | 150 Kg |
| 9 | UL-10105 Soft | 200L X 125W X I50H [8"] | Ø 10 - Ø 140 | 175 Kg |
| 10 | UL-10105 Hard | 200L X 125W X I50H [8"] | Ø 10 - Ø 140 | 175 Kg |
HARDENED AND GROUND MAGNETIC V BLOCKS
All sides are hardened & ground
Used for grinding, light Miliing, Drilling & inspection of round & square Jobs.
Accuracy for Flatness, squareness & parallelism within 0.005mm upto 150L & 0.010mm for 200L
Hardness 60 2 RC.
Supplied in matched pair.
Uniform and Strong magnetic pull to all three magnetic surfaces, Top, Bottom & V Faces.
Easy ON - OFF facility.
120 "V" angle also available.
|
|||||||||||||||||||||||||||||||
ULTRA HARDENED & GROUND V BLOCKS
Usedfor supporting of round and square jobs during Light machining, Grinding, Drilling & Inspection. Accuracy for Flatness, Squarenessand Parallelism within 0.003mm. Hardness 602 Rc. Supplied in perfectmatched pair. Supplied with clamp. Can also be used for end face, sideface and right angle Grinding
| Sr.No. | Cat No. | Size | Range (mm) |
| 1 | UL-10201 | 25L X 20W X 20H [1"] | Ø 3 - Ø 20 |
| 2 | UL-10202 | 50L X 20W X 20H [1"] | Ø 5 - Ø 30 |
| 3 | UL-10203 | 80L X 20W X 20H [1"] | Ø 6 - Ø 50 |
| 4 | UL-10204 | 100L X 20W X 20H [1"] | Ø 6 - Ø 70 |
Mr. Sanjiv Shah (M/S Jay Bee Enterprises)
Burhani House, Room # 21,2nd Floor, 53, Bhajipala Lane, Nagdevi Street, Masjid Bunder, Mumbai, Maharashtra - 400003, India
https://www.jaybeeenterprises.co.in
Share us via
