Feature : Dramatically increased visibility using wide display part, Realizes ideal temp. controlling with newly developed PID control algorithm and 100ms high speed sampling.
Feature : 4 target setpoints (PID numbers) available as standard, 3 alarm independent common terminals available as standard, Ladder sequence programs can be built
We are offering proportional control system, . Proportional action on different actuated error signals generated externally control of proportional rate & study of its effect on the controlled signal electronic simulation....
We are offering proportional derivative control system. Derivative & proportional action on different actuated error signals (simulated) generated for closed loop behavior of systems electronic simulation control of derivative time, proportional rate & study of its effect on the...
We are offering proportional integral control system. Integral & proportional action on different actuated error signals generated externally control of integral time, proportional rate & study of its effect on the controlled signal electronic simulation facility for...
Input : ONE UNIVERSAL Input
Thermocouples : J,K,T,R,S
RTD's : PT-100, PT-1000
DC mA : 0 – 20 mA, 4 – 20 mA (Maximum 12 Volts)
DC mV : ± 50 mV, ± 100 mV, ± 200 mV, ± 250 mV
DC Volts : ± 1V, ± 3.3V, ± 5V, ± 10V
Note : Output modules are predefined
All three outputs can be assigned as relay or SSR or 4-20 mA, this means at a time either 3 relays or 3 SSR's or 3 4-20 mAs outputs also available
Control Action Assign : PID for O/P 1 and O/P 2
ON-OFF for O/P 1, O/P 2 , O/P 3
T/P for O/P 1, O/P 2 , O/P 3
Range : Refer 'table A''
Display : Super bright in 4 + 4 format , with NO BLINK programming technique
Upper 4 digits 0.5" red colour
Lower 4 digits 0.39" green colour
Retransmission : 4-20 mA or 20-4 mA or 0-20 mA or 20-0 mA programmable, Non-isolated,
Retransmission assign for O/P 2 and O/P 3 Provided on request
Control Modes : Heat / Cool / Heat-Cool
Communication : RS485, 2-Wire, Half duplex
RS485 MODBUS on request, MODBUS RTU or ASCII
Baud Rate Programmable 1200/2400/4800/9600, contact factory for higher Baud Rates
Control Action : PID / On-OFF / TP
PID P = Propotional Band = 1.0 to 999.9 units adjustable
I = Integral = 0 to 3600 ( 0-1200) seconds adjustable
D = Derivative = 0 to 500 seconds adjustable
CT = Cycle Time = 0.5 to100 seconds adjustable
On-OFF Hys
PROFILER : 2 Profile Programmes / 8 Segments Each
Each segment programmable for either RAMP or SOAK
Profiler can be configured as : - RAMP/SOAK - RAMP/RAMP - SOAK/SOAK - SOAK/COOL
Soak Time programmable in HH-MM , MM-SEC
Overshoot control during
The PID2020 series is developed with state of art microcontroller. The robust hardware and software makes the controller very useful in noisy industrial environment. The PID2020 finds applications in Industrial Ovens, Muffle Furnaces, B.O.D....
Features • Low cost, Effective, Easy to use PID Temperature Controller • 4 Digits Dual Row Display (4-Digits for PV & 4-Digits for SV) • Selectable sensor input (T/C : J, K, R, S & RTD) from keyboard • Programmable Lower & Upper set point...