Listing ID #3904509
Company Information
Ask for more detail from the seller
Contact SupplierFEATURES:
- Machines comprise of six / ten work rolls arranged in pairs
- Rolls quickly and easily adjustable angularly to give perfect contact between the tube and the roll, over the maximum effective roll profile
- Simple setting of the machine for different sizes of tubes
- All rolls driven by two identical electric motors
- Machines fitted with indicators for vertical and angular setting of rolls
- Machines available in Single Speed and Variable Speed Options
To obtain best results from the machine, correctly designed inlet and outlet through are essential because the tube rotates at high speed and must be controlled before and after straightening.
ROLLS: Made from Alloy Steel, Hardened, Hyperbolic Profile Ground and Lapped. Hyperbolic Profiles designed to accept wide range of tube diameters
ROLL CARRIERS: Designed to give maximum Roll Stability even when fully extended
MAIN DRIVE: Drive to the rolls by two totally enclosed gear boxes, each having three/five output shafts, connected by universal joints. Bottom rolls and Upper Rolls driven independently. Gears are single helical made from Alloy Steel, hardened & ground. Motors connected to the input shaft of the gear boxes by flexible coupling / ‘V’ belts
ENTRY GUIDES: Entry guides made from Special Elastomer provided for the entire range
GUARDS: Perspex transparent screen guard provided in front of the rolls.
CONTROL PANEL: A control panel housing all electrical controls for running the machine provided.
Model | SE-10 | SE-15 | SE-20 | SE-25 | SE-31 | SE-32 | SE-33 | SE-36 | SE-40 |
Normal Capacity Range (Tube OD) (mm): | 1.5 - 8 | 3 - 13 | 4.5 - 16 | 6 - 25 | 8 - 40 | 13 - 65 | 20 - 100 | 25 - 125 | 30 - 150 |
Max. Wall Thickness (mm): | 1.5 | 2.5 | 2.5 | 3.2 | 4.5 | 6 | 8 | 8.5 | 9.5 |
Number of Rolls: | 6 or 10 | 6 or 10 | 6 or 10 | 6 or 10 | 6 or 10 | 6 or 10 | 6 or 10 | 6 or 10 | 6 or 10 |
Straightness Achievable on 6 roll machine: | 1:1000 or better | 1:1000 or better | 1:1000 or better | 1:1000 or better | 1:1000 or better | 1:1000 or better | 1:1000 or better | 1:1000 or better | 1:1000 or better |
Straightness Achievable on 10 roll machine: | 1:3000 | 1:3000 | 1:3000 | 1:3000 | 1:3000 | 1:3000 | 1:3000 | 1:3000 | 1:3000 |
Max. Diameter Admitted (mm): | 8 | 13 | 20 | 32 | 45 | 75 | 115 | 140 | 165 |
Max. Wall Thickness at Max. Diameter (mm): | 1.5 | 2.5 | 2 | 2.5 | 3.5 | 4.5 | 6.5 | 6.5 | 7 |
Operating Speed on Single Speed M/c (m/min): | 18 | 36 | 36 | 30 | 30 | 30 | 30 | 30 | 30 |
Operating Speed on Variable Speed M/c (m/min): | 0 - 18 | 0 - 36 | 0 - 36 | 0 - 30 | 0 - 30 | 0 - 30 | 0 - 30 | 0 - 30 | 0 - 30 |