Pairing : Two Insulated Cores Shall Be Uniformly Twisted Together To Form A Pair With Maximum Lay Length Of 100 Mm.
Assembly : Twisted Pairs Are Laid Up Together, If Necessary Interstices May Be Filled With Fillers Of Non-Hygroscopic Material Compatible With The Insulation.
Condition : New
Overall Shielding : Accumulated Pairs Again Overall Shielded With Aluminium Mylar Tape, Helically Applied With The Metallic Side Down In Continuous Electrical Contact With Annealed Tinned Copper Drain Wire Of 0.5mm2
Pair Identification : Colour Code As Per BS-5308 Part-2 Individual Shielding : Each Pair Shielded With Aluminium Mylar Tape, Helically Applied With The Metallic Side Down In Continuous Electrical Contact With Annealed Tinned Copper Drain Wire Of 0.5mm2.
Feature : Flexible, Long Life
Bedding /Inner Sheath : Extruded PVC .(For Unarmoured Cables: Inner Sheath To Be Provided Only If Required)
Bedding /Inner Sheath : Non-Hygroscopic Poly Propylene Fillers Are Included Between Laid Up Cores Wherever Required. Xlpe PVC / HR PVC / FR/FRLS Extruded PVC Compatible With Operating Temperature.
Admissible Pulling Force (When Pulled With Pulling Eye) : Copper-5ON/Mm2
Minimum Bending Radius : 12XD(For Multicore); D-Overall Diameter Of Cable(Mm)
Assembly : Insulated Conductors Are Laid Up Together; If Necessary Interstices May Be Filled With Fillers. A Separator Tape Of Non Hygroscopic Poly Propylene Material Is Applied Over Laid Up Cores Wherever Necessary.
Outer Sheath : Xlpe PVC/ HR PVC/ FR /FRLS PVC Can Be Used For Outer Sheath To Suit A Variety Of Environment And Fire Risk Conditions.
These are the specification of High Mast Cables Manufacturing. 1.1 KV Grade, Flexible Annealed Tinned Copper Conductor As Per IS : 8130, EPR Insulated Type IE-2 As Per IS : 6380, Cores Will Be Identified With Coloured Insulation, All Cores...
We are manufacturing a wide range of Instrumentation Cable used for electronic Control Panel , Control Instruments, Computing Systems and Networking of Instruments. Also designing and developing the Cable as per the custom designed parameters based...
instrumentation cables are used in normal or hazardous areas. These come with or without flame retardant properties and are suitable in process control, a/d converters and other modern microprocessor based instrumentation circuits. These cables...
We are offering High Temperature Control Cable for voltage rating upto 1100 v (max. Temperature 700oc) in various plants especially steel or glass plants, where ambient is worst due to temperature variation, humidity and arc, high temperature...
Construction: Conductor Bare / tinned electrolytic annealed copper conductor. Solid, stranded or flexible confirming to BS 6360 and IS 8130. Refer Table 1 for details. Insulation : PVC or HR PVC insulation in accordance with IS 5831. Polyethylene...