Post Buy Requirement
MS
Mumbai, Maharashtra, India
Add Review

Servo Motors #3987756

Integrated Servo Motors

Leadshine iSV series integrated brushless servo motors are highly integrated servo systems at very competitive costs. An iSV series integrated servo motor consists of a motor, an encoder, and a servo drive. At very compact size, it eliminates the power and encoder cable wiring in normal servo systems to save time, lower labor cost, save installation space, and increase product reliability. Motors are available in NEMA 23 frame size and can output up to 180W continuous power at peak speed of 4, 000 RPM. A standard 1, 000-line encoder is mounted, with the option of 500-line or 2500-line. The integrated high performance servo drive are DSP based adopting Leadshines advanced control algorithm which can drive the motor at very high precision smoothly with very little noise and motor heating. In addition, outputs of fault and in position signals in a integrated servo motor can be directly sent to the motion controller or external control/monitoring devices. By taking step and direction control for standard models, iSV series integrated servo motors are easy to adopt for many OEM applications. For advanced applications, Leadshine can also provide optional models with RS485 and CANopen controls.

Model Series Frame
Size
Torque
(N*m)
Rated
Voltage
(V)
Rated
Power
(W)
Motor
Length
(mm)

Shalf
Diameter
(mm)

Weight (kg)
Continuous Peak
iSV-B23090 iSV-B NEMA 23 0.29 0.87 36 90 108 8 0.95
iSV-B23130 iSV-B NEMA 23 0.41 1.23 36 130 128 8 1.25
iSV-B23180 iSV-B NEMA 23 0.57 1.71 36 180 148 8 1.54
iSV-B23090-01 iSV-B NEMA 23 0.29 0.87 36 90 108 8 0.95
iSV-B23130-01 iSV-B NEMA 23 0.41 1.23 36 130 128 8 1.25
iSV-B23180-01 iSV-B NEMA 23 0.57 1.71 36 180 148 8 1.54










View Complete Details

Easy Servo Motors

Leadshine offers Closed Loop Stepper Motors (stepper motors with encoders) from NEMA 23 to 42 with torque up to 20 Nm (2, 832 oz-in). Those easy servo motors are integrated with 1, 000-line incremental encoders.
When driven by Leadshine's Closed Loop Stepper Motors, the system can fully close the position loops between the drive and motors and eliminate loss of movement synchronization with features of no loss of steps and no torque reservation. Compared with servo systems, easy servo systems have much higher low-speed torque that servo systems lack, significantly lower cost, no overshooting, and no hunting.
Leadshine easy servo motors can also be implemented as standard stepper motors with encoders, and driven by stepper drives with the option of outpputing encoder signal to a motion controller, PLC, or external device.
The ES-M series easy servo motors are available in NEMA 23 to 34 frame sizes with 0.9 - 8.0 Nm torque (128 - 1, 133 oz-in). It was designed to be powered by Leadshine ES-D series easy servo drives taking max 80 DC / AC voltage input.
The ES-MH series easy servo motors are available in NEMA 23 to 34 frame sizes with 4.0 - 20 Nm torque (466 - 2, 832 oz-in). It was specially designed to be powered by Leadshine ES-DH series easy servo drives taking 110 / 120 or 220 / 230 VAC direct .

View Complete Details

Low Voltage AC Servo Motors

Leadshine designs and manufactures high quality low voltage input AC servo motors with rated power from 50 to 750 watts. Those servo motors are available in the frame sizes of 40 mm, 60 mm, and 80 mm. Encoder resolution options include 1, 000-line, 2, 500-line, 5, 000-line, and 17-bit.For high volume OEM customers, Leadshine also offers customization to meet special requirements such as customized shafts, brakes, etc.

Model Series Frame
Size
Rated
Power
(W)
Rated
Voltage
(VDC)
Torque
(N*m)
Speed
(RPM)
Encoder
Resolution
Motor
Length
(mm)
Shaft
Diameter
(mm)
Continuous Peak Rated Peak
ACM601V36-01 ACM 60mm 100 36 0.318 0.95 3,000 4,000 1,000-line 96 8
ACM601V36-T ACM 60mm 100 36 0.318 0.95 3,000 5,000 2,500-line 89.5 8
ACM602V36-01 ACM 60mm 200 36 0.64 1.91 3,000 4,000 1,000-line 123.5 11
ACM602V36-T ACM 60mm 200 36 0.64 1.91 3,000 5,000 2,500-line 103.5 14
ACM604V60-01 ACM 60mm 400 60 1.27 3.82 3,000 4,000 1,000-line 131.5 14
ACM604V48-T ACM 60mm 400 48 1.27 3.82 3,000 4,500 2,500-line 131.5 14
ACM604V60-T ACM 60mm 400 60 1.27 3.82 3,000 5,000 2,500-line 131.5 14












View Complete Details

High Voltage AC Servo Motors

The EL5-M series high voltage brushless AC servo motors provide applications with high torque density to attain high acceleration capability and faster positioning. They are available in metric frame sizes from 40 mm to 130 mm. A wide variety of options are available for customization to meet your application needs - encoders, brakes, shafts, connectors, environmental, etc. Standard modes have standard cabling options for direct connection to the EL5-D drives.
View Complete Details

Integrated Easy Servo Motors

A Leadshine integrated closed loop stepper motor consists of a high torque stepper motor, a rotary encoder, and an integrated DSP-based digital easy servo drive. With the adoption of a high resolution encoder, shaft position of the stepper motor is fed back to the servo drive in real time. The drive can then fully close the position loop, which is the same mechanism as classic brushless servo drives. Therefore, loss of movement synchronization (step loss) in open loop stepper systems is totally eliminated.
Leadshine integrated closed loop stepper motors inherit the favored features of both open loop stepper and brushless servo systems. While still keeping costs low similar to stepper systems, fatal drawbacks of open loop stepper systems such as heating, loss of steps, noise., are eliminated and significantly improved. Compared with traditional brushless servo systems, Leadshine integrated easy servo motors outperform in high starting & low-speed torque, no hunting, no overshooting, plug-and-play for no tuning in most applications, and almost zero setting time. In addition, the totally integrated design minimizes wiring cables, saves mounting space, and is more reliable to external interference. Please click the above Main Features tab to read more information.
Leadshine integrated closed loop stepper motors are currently available in NEMA 17 and 23 frame sizes with the torque of 0.3 2.0 Nm, or 43 283 oz-in. Pretty soon, more models in frame size NEMA 17, 23 and 24 will be added to this product line.

Available Products

 

 

 

 

Model Series Frame Size
(NEMA)
Holding Torque
(N*m)

Operating Voltage
(VDC)

Control
Mode
Input Frequency
(kHz, Max.)
Input(s) Output(s) Encoder
Resolution
iES-1706 iES 17 0.6 18-38 Step & Dir 200 Step, Dir, ENA In Position, Fault 1,000
iES-2309 iES 23 0.9 20-50 Step & Dir 500 Step, Dir, ENA In position, Fault 1,000
iES-2320 iES 23 2.0 20-50 Step & Dir 500 Step, Dir, ENA In position, Fault 1,000
 





View Complete Details

Brushed DC Servo Motors

Leadshine DCM series brushed DC servo motors are made of high quality materials. They are at industrial quality and have been adopted by hundreds of OEM clients in the world in tens of industries such as CNC machinery, Inkjet printers, plotters, screen printing, lab automation, etc. Leadshine DCM brushed servo motors are integrated with standard 500-line or 1, 000-line (standard) incremental encoders. When powered by servo drives from Leadshine or other manufactures, they perform excellent in all speed range (low, middle, and high) with high precision, low motor heating & noise, smooth movement. Their frame sizes are available in 54 mm (compatible with Pittman 14000 series), or standard NEMA 23.

Model Series Rated
Power
(W)

Frame Size

Torque
(N*m)
Rated
Voltage
(V)
Speed
(RPM)
Encoder
Resolution
(line)
Motor
Length
(mm)
Shaft
Diameter 
(mm)
Continuous Peak Continuous Peak
DCM50202A DCM 50 54 mm (Pittman 14000 Compatible) 0.15 0.76 24 3,500 4,600 1,000 133 6.35
DCM50205 DCM 80 54 mm (Pittman 14000 Compatible) 0.25 1.59 24 3,400 4,000 1,000 163 6.35
DCM50207 DCM 120 54 mm (Pittman 14000 Compatible) 0.35 2.90 30.3 2,900 3,600 1,000 196 8
DCM57207 DCM 120 NEMA 23 0.35 2.90 30.3 2,900 3,600 1,000 196 8












View Complete Details

BLDC Servo Motors

Leadshine's BLM series motors are highly cost-effective brushless DC servo motors. Rated speed of BLM series motors is 3000 rpm. Standard model includes a 1000-line differential encoder (EA+/EA-, EB+/EB-), and Hall Sensors with standard Hall signals (U, V, W). Servo systems built with the BLM series motors and Leadshine ACS series servo drives are able to offer AC-servo-like performance, such as high speed, high precision, low motor noise and low heating performance, while at the cost of normal stepper systems.

Model Series Rated
Power
(W)

Frame Size

Torque
(N*m)
Rated
Voltage
(V)
Speed
(RPM)
Encoder
Resolution
(line)
Motor
Length
(mm)
Shaft
Diameter 
(mm)
Continuous Peak Continuous Peak
BLM57025 BLM 25 NEMA 23 0.08 0.24 24 3,000 4,000 1,000 70 6.35
BLM57050 BLM 50 NEMA 23 0.16 0.48 24 3,000 4,000 1,000 80 6.35
BLM57090 BLM 90 NEMA 23 0.29 0.87 36 3,000 4,000 1,000 100 6.35
BLM57130 BLM 130 NEMA 23 0.41 1.23 36 3,000 4,000 1,000 120 8
BLM57180 BLM 180 NEMA 23 0.57 1.71 36 3,000 4,000 1,000 140 8
57BL180 BLM 180 Round face
diameter 54mm
0.57 1.71 36 3,000 4,000 1,000 122 8













View Complete Details

Linear Servo Motors

We have carved a niche amongst the most trusted names in this business, engaged in offering comprehensive range of Linear Servo Motor (TC Series).
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us