GST : 06ADWPC2191D1ZN
5.0/5
Our Product / Services
Our offered Product range includes Whirling Table, Aluminum Slide Warming Table, Stainless Steel Slide Warming Table, Animal Operation Table and Force Table.
Product Description
Whirling Table
For demonstrating the effects of rotation or centrifugal force. Can be used in both horizontal and vertical positions. Consists of a heavy cast-metal stand, about 40cm high, a driving wheel, 15cm diameter with a handle and a nickel plated spindle with a small pulley at the top, fitted with frictionless bearings. The spindle is driven by the driving wheel with the help of a belt through the wheel and the pulley. Provision for adjustment of the belt tension. Also provided an adapter socket with non-detachable tightening screw that can be attached to the spindle for mounting various accessories. The table also has an in built clamping system to hold it firmly in vertical position. Complete with spare belt and user instruction manual.
The body is made out of thick mild steel duly finished in stoving enamel and top is made of highly polished copper or stainless steel sheet. Complete with thermostatic control knob, indicator lamp, plug & cord etc. to work on 220 V AC 50 Hz single phase.
The body is made out of thick mild steel duly finished in stoving enamel and top is made of highly polished copper or stainless steel sheet. Complete with thermostatic control knob, indicator lamp, plug & cord etc. to work on 220 V AC 50 Hz single phase.
Made entirely from stainless steel, in two halves slopping towards the centre a small wedge over the whole length separates the two halves, under the wedge provided a brass drain pipe. Removable and replaceable by sliding IN or OUT blood and other fluids flow towards the centre of the table, from where these drip into the drain pipe and carried through an end drain tube to the receptacle after operation the whole top can be washed clean the drain pipe removed, cleared and replaced the S.S. top is heated a set of electric lamp, placed to effect balanced heat distribution, dog holder with its S.S. upright slide along slot in the top useful for fixing accessories A.S.S. swing tray is fitted on a upright in one corner of the top useful for placing dissecting instruments accessories etc. Steel pipe frame handle and wheel for conscience in moving. –do—small type for frog, Rabbit guinea pigs etc.
Product Description
Force Table
For studying the vector nature of forces and verification of law of composition and resolution of forces. Table made of precision turned circular aluminium disc, with raised rim and is finished with scratch resistant matt black paint. The raised rim has a circular scale graduated to 3601 with readings at every 10 interval. The table-top is supported by a sturdy vertical metal pipe and a heavy tripod base with three leveling screws. Four adjustable pulley clamps with index marks can be attached anywhere around the perimeter of the table for performing experiments.
Lightweight suspension cords, which are joined to a central ring pass over the pulleys and ends in a ring for supporting the applied masses. A detachable pin is mounted at the center of the table around which the central ring is balanced by adjusting the masses and position of pulleys to indicate equilibrium of forces. Complete with 4 pulley clamps, 4 slotted weights sets and user instruction manual.
Mr. Dushyant Singh Chauhan (Micro Technologies)
2557/10, Bengali Mohalla, Near Haryana Bakery, Ambala Cantt - 133001, India
Share us via
