Autoclaves #420779

Product Description

Cement Autoclaves

We are engaged in manufacturing and exporting a wide range of Cement Autoclaves. These products includes a stainless steel cylinder with a welded heat insulated voer that is confined in a heat insulated metal housing, mounted on a sturdy supporting frame. In order to control the electric heating units, the attached control unit holds in a sensitive pressure regulator, pressure gauze, power switches and pilot lights. In addition to this, to hold specimens above water level in a vertical position and autoclave, laboratory cement autoclave is offered by us with test bar holder and special rack to expose them in the same manner.

Technical specifications:

Inside chamber dimensions are 10.5 cm diameter x 40.5 cm height

The device is suitable for operation on 230 V, 50 Hz, single phase A.C. supply.

Product Description

Horizontal Autoclave

Horizontal autoclave (Cylindrical) Triple wall with

Pressure switch & water cutoff

(Triple walled with Steam Jacket).

The autoclave is mounted on a Mild Steel tabular stand. The autoclave Chamber & steam jacket are made of 14 SWG. Stainless steel, Outer shell which serves as a cover is made of stainless Steel. Steam jacket allows dry sterilization. Hinged door is made of stainless steel. Radial Locking arms prevent opening of the door while Steam is inside the chamber. Autoclave is fitted with neoprene gasket; steam is generated in a separate boiler which is placed below the main body. Multiport valve is provided for Steam, dry sterilization & steam exhaust.

Autoclave is fitted with easily replaceable heaters and water level indicator. Autoclave holds pressure at selected point between 10 to 20psi +/- 3 psi. Pressure control has markings which are approximate; the actual pressure is as shown by the pressure gauge. Hydraulically tested at 40psi. Fitted with safety valves pressure is as shown by the pressure gauge. Hydraulically tested at 40psi. Fitted with safety Valves pressure gauges, steam release valve, steam trap, and one tray.

We are the main supplier of this product.

Product Description

Horizontal Autoclaves

Owing to our expertise in this domain, we are engaged in offering Horizontal Autoclaves. These autoclaves comprise triple walled cylindrical with full steam jacket and separate boiler. Heavy gauge stainless steel is used for making inner chamber and steam jacket with sheet with leak proof argon-arc welding. Manufactured using stainless steel, the sterilizer has single piece door. In addition to this, mounted on tubular steel frame with ground leveling screwed flanges, back plate and ring is also made of thick stainless steel sheet. The outer jacket is wrapped with asbestos sheet or glass wool and steam generator, which is made using heavy stainless steel sheet. Fitted with heating elements and low water level cutoff device, a plate is provided with these autoclaves. For easy cleaning of the deposited scale on the elements, front folding plate system is provided. Pressure control switch is fitted with water gauge glass for water level indication, water inlet and outlet valves.

With the help of multi-port valve, which is fitted at front top, complete sterilizing cycle is controlled from one point. Fast and slow speeds of steam exhaust are available. Mounted on the multi port valve, easily readable jacket and chamber pressure on gauges are available. To absorb the condensate automatically to prevent moistening of the subject matter to be sterilized, a moisture trap is fitted in the chamber discharge line. In order to break vacuum in case of formation of vacuum due to steam condensation, automatic vacuum breaker is provided.

Specifications:-

Sterilizing pressure: 1.2 to 1.5 kg/cm2 (15 psi to 22psi)

Power requirement: Suitable to operate on 440V, 3ph, 50Hz, ac supply.

Product Description

Stainless Steel Vertical Autoclaves

is claiming to be the largest manufacturer of vertical autoclaves. especially working on its build up, this has an inner chamber, made out of the finest quality of stainless steel of 304 grades. Body of the outer chamber is made of thick mild steel furnished with hammer toned paint as well as coated with stainless steel.

Product Description

Horizontal Rectangular Autoclave Deluxe Model

(Triple walled with steam jacket and separate Boiler). The Autoclave is mounted on a M.S. tubular stand. This Autoclaves Inner & Outer chamber & steam jacket are made of S.S. 304. Steam jacket allows Dry sterilization. Hinged door is made of Stainless steel. Radial locking arms prevent opening of the door while steam is inside the chamber. Gasket is of synthetic neoprene, Steam is generated in a separate boiler which is placed below the Main body. The steam generator is fitted with easily replaceable Heaters and water level indicator. Autoclave hold pressure at selected Point between 10 to 20 psi +/- 3 psi pressure control switch has Markings which are approximate, correct pressure is as shown by the pressure gauge Hydraulically tested at 40psi. Fitted with safety Valves, pressure gauge. Hydraulically tested at 40psi. Fitted With safety valves, pressure gauges, air filter, steam release valve, Stream trap, and one tray. 1Kg. Cm2 = 14.7 psi.

Product Description

Our vertical autoclave are widely used sterilization procedures and in various laboratory application.These autoclaves are manufactured from quality materials thus providing maximum satisfaction to our clients.

Product Description

Offering horizontal rectangular autoclave:

Triple walled rectangular with full steam jacket and separate boiler, inner chamber and steam jacket are made up of heavy gauge S.S. Sheet with leak proof argon-arc welding. The sterilizer has single piece door made of stainless steel. Back plate and ring is also made of thick stainless steel sheet. Mounted on tubular steel frame with ground leveling screwed flanges. The outer jacket is wrapped with asbestos sheet or glass wool. Steam generator made of heavy stainless steel sheet. Plate is fitted with heating elements and low water level cutoff device. Front folding plate system provides for easy cleaning of the deposited scale on the elements. Fitted with water gauge glass for water level indication, water inlet and outlet valves. Pressure control switch.

Complete sterilizing cycle is controlled from one point with the help of multi port valve fitted at front top. Two speeds of steam exhaust are available, fast and slow. Easily readable jacket and chamber pressure on gauges mounted on the multi port valve. A moisture trap is fitted in the chamber discharge line to absorb the condensate automatically to prevent moistening of the subject matter to be sterilized.

- Automatic vacuum breaker is provided to break vacuum in case of formation of vacuum due to steam condensation.

- Sterilizing pressure: 1.2 to 1.5 kg per cm2(15 psi to 22psi).

- Power requirement: Suitable to operate on 440V volts, 3 ph, 50 Hz, AC supply size inside the chamber.

Product Description

Stainless Steel Cement Autoclaves

We are engaged in manufacturing and exporting a wide range of Cement Autoclaves. These products includes a stainless steel cylinder with a welded heat insulated voer that is confined in a heat insulated metal housing, mounted on a sturdy supporting frame. In order to control the electric heating units, the attached control unit holds in a sensitive pressure regulator, pressure gauze, power switches and pilot lights. In addition to this, to hold specimens above water level in a vertical position and autoclave, laboratory cement autoclave is offered by us with test bar holder and special rack to expose them in the same manner.

Technical specifications:-

Inside chamber dimensions are 10.5 cm diameter x 40.5 cm height

The device is suitable for operation on 230 V, 50 Hz, single phase A.C. supply.

Product Description

Fully automatic horizontal autoclave with data logger touch screen controller digital pressure controller usb attachments.