Voltage Stabilizer

Our Complete range of products are Pvc Non-toxic Stabilizer, PVC Stabilizer, Calcium Zinc Non-Toxic Stabilizer and Mixed Metal Powder Stabilizer.

PVC Non-toxic Stabilizer

We are offering pvc non-toxic stabilizer. Unistab-cz-p is calcium & zinc based co-precipitate manufactured under controlled conditions, resulting in a high performance heat stabilizer that is better functionally as well as operationally in pvc processing. It is specially designed for rigid pvc pipe application where lead based stabilizers cannot be used due to safety reasons. It gives excellent results at low as well as high filler loadings. typical physiochemical properties property unit unistab cz-p appearance -- white to cream lubricated granular powder ash content % 16 + 1.0 specific gravity -- 1 + 0.05 moisture % max 2.0 ph value -- 6.3 + 0.5 melting point c 110 -115 free fatty matter % 18 + 2 1) at the time of packing 2) by ir moisture balance 3) is: 7589-1974 (a-8) 4) is: 12076-1986(a-2) 5) is: 2850-1983 (a-5.1) applications: rigid pvc pipes and pvc cables: the unistab-cz range of lubricated one pack provides synergistic efficiencies due to their unique proprietary process of manufacture. Use of waxes and calcium stearate is not required separately, as they are zinc & calcium based, although it is at the compounders will depending upon the filler loading and process conditions.

View Complete Details

Ask Latest Price & Details

Pvc Stabilizer

We are reckoned as one of the foremost Manufacturers of PVC Stabilizer in the country. In PVC Processing (extrusion, injection moulding etc.), the polymer is subjected to high temperature which can lead to burning )degradation or breaking of polymer chains). Heat stablizers are lead compounds that are added to prevent burning. Conventionally combination of three chemicals, TBLS, DBLS and LS (Tribasic lead sulphate, dibasic Lead stearate and Lead stearate) were used as heat stablizers with Calcium Stearate as a co-stablizer. Now one pack is used in place of the three chemicals as heat stabilizer. Its performance depens on two things

The lead oxide content which provides stabilization by deactivating the chloride radical formed during heated melt processing of PVC during extrusion
by providing lubrication so that the residence time inside the screw extruder ( heated zone ) is reduced, so less deterioration is there.

We manufacture lead based one pack stabilizers which are manufactured by in-situ co-precipitation method and use advanced lubricants, anti oxidants and co-stabilizers. Our R&D is equipped with two roll calendering, thermal stability checking, rheometer and other equipment to check the performance of our stabilizers which compete with Baerlocher, Ferro, Akdeniz and Sunace in the international market. We also manufacture and supply TBLS / DBLS / LS

Typical Physiochemical Properties

PROPERTY	UNIT	PP-2	PP-3	PP-4
Appearance	-------	Snow White free flowing powder
Metal Content	%	30-35	35-40	50-55
Specific Gravity	-------	2.2-2.4	2.3-2.4	2.4-2.5
Moisture	% max	0.5	0.5	0.5
pH	-------	6.5-7.5	6.5-7.5	6.5-7.5
Melting Point	^oC	105-110	105-110	105-110
Residue on 240 mesh	% max	0.5	0.5	0.5
Free fatty matter	% max	0.2	0.2	0.2

PROPERTY	UNIT	PP-2	PP-3	PP-4
Appearance	-------	Snow White free flowing powder
Metal Content	%	30-35	40-45	50-55
Specific Gravity	-------	2.2-2.4	2.3-2.4	2.4-2.5
Moisture	% max	0.5	0.5	0.5
pH	-------	6.5-7.5	6.5-7.5	6.5-7.5
Melting Point	^oC	105-110	105-110	105-110
Residue on 240 mesh	% max	0.5	0.5	0.5
Free fatty matter	% max	0.2	0.2	0.2

View Complete Details

Ask Latest Price & Details

Calcium Zinc Non-Toxic Stabilizer

Calcium Zinc Non-Toxic Stabilizer is a calcium and zinc based co-precipitate. Due to increasing environmental concerns the lead based stabilizers are being phased out globally. Our R&D has developed non toxic calcium zinc based stabilizers which give excellent thermal stability .Our R&D is equipped with two roll calendering, thermal stability checking, rheometer and other equipment to check the performance of our stabilizers which compete with Baerlocher, Ferro, Akdeniz and Sunace in the international market. We offer specialized calcium zinc grades for different applications, some of the important ones being

Rigid PVC Pipes
Cables
Window profiles
Transparent applications

Typical Physiochemical Properties

PROPERTY	UNIT	UNISTAB CZ-C55
Appearance	--	Fine white powder
Ash Content	%	55 + 2
Specific Gravity	--	1.55 + 0.10
Moisture	%	3 max
Thermal stability time in plasticized compound	minutes	100

Details

Download Detail File : Click Here

View Complete Details

Ask Latest Price & Details

Mixed Metal Powder Stabilizer

Mixed Metal Powder Stabilizer is a co-precipitate, manufactured under controlled conditions. Mixed Metal Powder Stabilizer is a strong heat stabilizer with better functionality in both rigid and flexible PVC applications. Mixed Metal Powder Stabilizer has excellent initial color and has a long service life. Specifications

Appearance : White fine powder
B.D. : 300-400 gms/litre
Sp. Gravity : 1.25 0.02
FFA : 1 % max.
Moisture : 0.5 % max
Metal content : proprietary

Typical End Uses : Applications include translucent decorative sheets, injection compounds, construction profiles, automotive upholstery and floor tiles. It is recommended for use in calendaring, injection, extrusion and molding compounds. Recommended Dosage : Recommended for 2 4 phr.

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back