An optical smoke detector or photo-electric alarm works on the light scattering principle. The sensor chamber checks for smoke particles after every 10 seconds with the help of a pulsed infrared LED beam. These smoke detectors indicate a fire in non-smoking zones. They are used widely by commercial and industrial buildings as a safety measure.

A commercial smoke detector sends a signal to the fire control panel while household fire alarms give audible or visual alarm from the detector. Smoke detectors are disc-shaped set up in plastic enclosures. The process of smoke detection takes place either through ionization or the photoelectric process. The detectors can use either of the two sensing methods.

Domestic smoke detectors are interlinked and if one of them detects smoke, all the alarms trigger altogether even if the household power has gone out. Smoke detectors are used mostly in hospitals, gyms, office buildings, industries, malls and commercial buildings.

Smoke detectors work by detecting smoke in the first few seconds of the incident and send the signal to the fire control alarm panel. The types of detectors vary depending on the indicated fire that they detect. It also depends on the detection principle. Smoke, heat and flame are three main indicators of fire. The process used for detecting smoke is based on the light- scattering principle. When there is fire, smoke particles enter the optical chamber of smoke detectors. The LED light refracts and scatters on a photodiode. Then, the optical smoke detector sends the fire alarm signal to the control panel.

Were you looking for good quality standalone smoke detectors at affordable prices for your home or office? If yes, get ready to invest your hard-earned money in the smoke detectors sold here at Palladium Safety Solutions Pvt. Ltd.
As the name speaks for itself, smoke detectors are fire protection devices that automatically detect the presence of smoke and triggers an alarm to the building occupants. But what is a standalone smoke detector?
Well, there are two main types of smoke detectors, they are ionization smoke detectors and photoelectric smoke detectors, where ionization smoke detectors detect smoke using ionized particles while the photoelectric smoke detectors use a light source/sensor to detect smoke.
The Standalone detector is 9v operated. Standalone Photoelectric Smoke Detector can detect a large amount of smoke when fire generated sending alarm signal in time. Alarm adopts photoelectric smoke devices and excellent production technology, work stability, beautiful appearance, easy to install, without debugging, which can be widely used in hotels, stores, Internet, cafes, coffee shop, lounge and residential places on fire safety monitoring.

We are Manufacturer of Fire Alarm Systems Response Indicators are connected to automatic Fire Detectors in order to indicate quickly the source of an alarm signal from Detectors which are not easily accessible or visible. The Response Indicators contain an indicator lamp unit with one resp. two LED. They light up as soon as the connected fire detector gives an alarm. Only one external response indicator may be connected to each detector.

An optical smoke detector or photo-electric alarm works on the light scattering principle. The sensor chamber checks for smoke particles after every 10 seconds with the help of a pulsed infrared LED beam. These smoke detectors indicate a fire in non-smoking zones. They are used widely by commercial and industrial buildings as a safety measure.

A commercial smoke detector sends a signal to the fire control panel while household fire alarms give audible or visual alarm from the detector. Smoke detectors are disc-shaped set up in plastic enclosures. The process of smoke detection takes place either through ionization or the photoelectric process. The detectors can use either of the two sensing methods.

Domestic smoke detectors are interlinked and if one of them detects smoke, all the alarms trigger altogether even if the household power has gone out. Smoke detectors are used mostly in hospitals, gyms, office buildings, industries, malls and commercial buildings.

Smoke detectors work by detecting smoke in the first few seconds of the incident and send the signal to the fire control alarm panel. The types of detectors vary depending on the indicated fire that they detect. It also depends on the detection principle. Smoke, heat and flame are three main indicators of fire. The process used for detecting smoke is based on the light- scattering principle. When there is fire, smoke particles enter the optical chamber of smoke detectors. The LED light refracts and scatters on a photodiode. Then, the optical smoke detector sends the fire alarm signal to the control panel.

Were you looking for good quality standalone smoke detectors at affordable prices for your home or office? If yes, get ready to invest your hard-earned money in the smoke detectors sold here at Palladium Safety Solutions Pvt. Ltd.
As the name speaks for itself, smoke detectors are fire protection devices that automatically detect the presence of smoke and triggers an alarm to the building occupants. But what is a standalone smoke detector?
Well, there are two main types of smoke detectors, they are ionization smoke detectors and photoelectric smoke detectors, where ionization smoke detectors detect smoke using ionized particles while the photoelectric smoke detectors use a light source/sensor to detect smoke.
The Standalone detector is 9v operated. Standalone Photoelectric Smoke Detector can detect a large amount of smoke when fire generated sending alarm signal in time. Alarm adopts photoelectric smoke devices and excellent production technology, work stability, beautiful appearance, easy to install, without debugging, which can be widely used in hotels, stores, Internet, cafes, coffee shop, lounge and residential places on fire safety monitoring.

We are Manufacturer of Fire Alarm Systems Response Indicators are connected to automatic Fire Detectors in order to indicate quickly the source of an alarm signal from Detectors which are not easily accessible or visible. The Response Indicators contain an indicator lamp unit with one resp. two LED. They light up as soon as the connected fire detector gives an alarm. Only one external response indicator may be connected to each detector.