GST : 24AANCS9768F1ZQ
Write a Review
Our Products
We offer the best product range of Automatic Auger Type Dry Syrup Powder Filler Machine.
Automatic Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.
The incoming dry bottle sterilized is fed through the in feed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, By the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle.
Technical Specifications of Auger Type Dry Syrup Powder Filling Machine
| Model | SBAF-60 | SBAF-D-100 |
|---|---|---|
| Direction | Left To Right. | Left To Right. |
| Production Rate | Up to 30 to 40 Bottles / Min | Up to 60 to 80 Bottles / Min. |
| Fill Capacity | 10 grms to 50 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder. | 10 grms to 50 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder. |
| Accuracy | ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%) | ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%) |
| No. of Heads | Single | Two |
| Electrical Supply | 1.00 HP For Main Drive. 0.25 HP for conveyor | 2.00 HP For Main Drive. 0.25 HP for conveyor |
| Power Requirement | 440 Volts, 3 Phase (4 wire System) 50 Hz. | 440 Volts, 3 Phase (4 wire System) 50 Hz. |
| Height of Conveyor | Adjustable from 850 To 900 mm | Adjustable from 850 To 900 mm |
| Dimensions | 1524 mm (L) X 1105 mm(W) X 1800 mm (H) | 2200 mm (L) X 1102 mm (W) X 1817 mm (H) |
| Net Weight | 400 KGS. (Approx.) | 550 KGS. (Approx.) |
| Gross Weight | 600 KGS. (Approx.) | 800 KGS. (Approx.) |
| Bottle Diameter | 25 mmTo 70 mm MAX. | 25 mm To 70 mm MAX. |
| Height | 55 mm To 110 mm. | 55 mm To 110 mm. |
| Pneumatic Air | Filtered, oil free, sterile low pressure AIR at 5 kg / cm2 | Filtered, oil free, sterile low pressure AIR at 6 kg / cm2 |
Shree (Shree Bhagwati Machtech India Pvt Ltd.)
9/A, Bhagyoday Estate, Ajod Dairy Road, Rakhial, Industrial Area, Ahmedabad - 380 023. Gujarat - 380023
Share us via
